近似周期时间序列分析（英文）

本文首先给出了近似周期时间序列概念,即:具有周期特征但是周期长度变化的时间序列.比如,太阳黑子序列具有11年左右的周期,但是其周期并不是11,而是在11左右变化,这就是一个近似周期序列.然后给出了提取近似周期趋势方法,并且提出了广义差分算子,这里提出的广义差分算子不仅可以消除时间序列的长期趋势和周期性,而且还可以消除近似周期性.最后,以太阳黑子序列为例说明了广义差分算子的应用.     

Synthesis of high molecular weight polyisobutylene via cationic polymerization at elevated temperatures

A novel simple but effective initiating system of H2O/AlCl3 /veratrole (VE) has been developed to synthesize high molecular weight polyisobutylene (PIB) at elevated temperatures via cationic polymerization of isobutylene (IB) in solvent mixture of hexane/methylene dichloride (n-Hex/CH2Cl2 = 2/1, V/V). VE played very important roles in decreasing cationicity of the growing chain ends, suppressing side reactions of chain transfer and termination during polymerization, leading to production of high molecular weight PIBs. PIBs with high yields, having very high weight-average molecular weight (Mw ) of 1117000 and 370000 g/mol could be synthesized with H2O/AlCl3 /VE initiating system at VE concentration of 5.4 mmol/L at 80 and 60℃ respectively. Molecular weight of PIB increased remarkably with increasing VE concentration. The reaction order with respect to VE concentration was determined to be 3.52 via FTIR spectroscopy in combination with a diamond tipped attenuated total reflectance (ATR) immersion probe. The negative reaction order of VE was consistent with its retarding effect on IB polymerization by interacting with the propagating species. Molecular weight of PIB decreased with increasing polymerization temperature. The activation energy for polymerization degree (EDP ) could be determined to be around 23 kJ/mol when VE concentration was 5.4 mmol/L or 6.4 mmol/L.     

Phase behavior of charge stablized colloid dispersion with added water soluble polymers

Demixing and colloidal crystallization in the mixture of charge stabilized colloidal poly(methyl methacrylate) particles and soluble poly(ethylene oxide) were investigated by means of synchrotron small-angle X-ray scattering (SAXS) technique. Phase diagram of the mixture was obtained based on visual inspection and SAXS results. The phase behavior is determined as a function of the concentration of the polymer as well as the volume fraction of the colloidal particles. The system shows a one phase region when the concentration of the polymer is low, whereas a two-phase region is present when the concentration of the polymer is larger than a critical concentration at certain volume fraction of the colloids. Interestingly, a face centered cubic colloidal crystalline structure was formed under certain conditions, which has been rarely observed in experiments of colloid-polymer mixtures with competing interactions.     

Medical applications of biopolyesters polyhydroxyalkanoates

Microbial polyhydroxyalkanoates(PHAs) are a family of biopolyesters produced by many wild type and engineered bacteria.PHAs have diverse structures accompanied by flexible thermal and mechanical properties.Combined with their in vitro biodegradation,cell and tissue compatibility,PHAs have been studied for medical applications,especially medical implants applications,including heart valve tissue engineering,vascular tissue engineering,bone tissue engineering,cartilage tissue engineering,nerve conduit tissue engineering as well as esophagus tissue engineering.Most studies have been conducted in the authors’ lab in the past 20+ years.Recently,mechanism on PHA promoted tissue regeneration was revealed to relate to cell responses to PHA biodegradation products and cell-material interactions mediated by microRNA.Very importantly,PHA implants were found not to cause carcinogenesis during long-term implantation.Thus,PHAs should have a bright future in biomedical areas.     

Some key ordered macroporous composites

This review summarizes recent progress of the ordered macroporous composites with the opals and inverse opal structure. Synthesis and performance of the composites are emphasized. Composition of the ordered composites is tunable ranging within metal, metal alloy, metal oxide, polymer, carbon and hydrogel. The ordered structure gives brilliant color effects, which is useful for sensors and photonic crystals. The interconnected macroporous structure provides easiness for mass transportation and species culturing.     

Correlation of SiO x layer thickness and properties of BOPP/SiO x composite films with spin coating process parameters

The effects of the spin coating process parameters on the thickness of the SiOx layer of the BOPP/SiOx composite film were investigated. When the concentration of tetraethoxysilane (TEOS) increased from 12.5 vol% to 55% vol%, the SiOx thickness increased from about 80 nm to 470 nm. In the sol time range of 1.5 h to 5 h the SiOx layer thickness reached a maximum at about 4 h and the change of the thickness roughly matched the change of the silica colloidal sphere sizes in sol. When the spin-coating speed of the dispensing stage increased from 450 r/min to 500 r/min, the SiOx layer thickness drastically decreased from about 1.67 μm to 400 nm. While the spin-coating speed of the thinning and drying stage went up to 1200 r/min, the SiOx layer thickness was in the range of 330 nm to 390 nm. It was also found that the SiOx layer thickness was almost increased linearly from about 500 nm to 1.02 μm with the ratio of the commercial silica colloidal to the TEOS from 0.2 to 1.0. The water contact angles decreased to about 23.0° for the BOPP/Si-Sol composite film with 1.67 μm SiOx layer and about 4.0° for the BOPP/mixing Si-Sol composite film with 1.02 μm SiOx layer. Compared to BOPP, the light transparency of the BOPP/Si-Sol composite films decreased by about 5.5% with the SiOx layer from about 80 nm to 1.67 μm and by 7.0% for the BOPP/mixing Si-Sol composite film with the SiOx layer from about 350 nm to 1.02 μm respectively.     

Synthesis, characterization and ion transport properties of hot-pressed solid polymer electrolytes (1−x) PEO:x KI

Synthesis and ion transport properties of hot-pressed solid polymer electrolytes (SPEs), (1-x) PEO: x KI, where x is the content of KI in wt%, are reported. A hot-press technique has been used for the formation of the polymeric membranes in place of the usual solution cast method. The composition (80PEO:20KI) was identified as the highest conducting polymer electrolyte on the basis of compositional dependent conductivity studies of PEO:KI films. A conductivity enhancement of more than two orders of magnitude from that of the pure PEO was achieved. Materials characterization and ion transport mechanism were explained by using various experimental techniques.     

Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.     

Dispersion production by semi-continuous radical vinyl acetate emulsion polymerization with silane co-monomer and characterization of final products

Vinyl acetate radical emulsion polymerization in water with GF51 silane co-monomer was performed by semi continuous way. The GF51 impacts on dispersion rheology as well on films and bonding strength properties were determined. It should be stated that even low quantities of GF51 (up to 6% from VAc) determined high viscosity of dispersions. The GF51 modified films have low water absorption and high affinity to glass. Molecular mass and thermal properties of GF51 modified polymers were determined accordingly.     

A real-time AFM study on crystal nucleation and growth in nanodroplets of isotactic polypropylene

Isotactic polypropylene (iPP) nanodroplets were prepared by using the classical droplet method in this study. The formation of nanodroplets allowed the controlled observation of polymer nucleation as well as access to crystal growth at exceptionally high supercooling in iPP. Three cases including the heterogeneous nucleation and fast crystallization in iPP droplets, the formation of multiple independent homogeneous nuclei within a single droplet and a single nucleus within a single droplet were detected by using atomic force microscopy (AFM) during gradually cooling after remelting the nanodroplets. Moreover, it is found that when the volume of droplet is larger than the value of ca. 130000 nm3, the first case was observed. Otherwise, the latter two cases appeared. The temperature at which the onset of nucleation was observed in individual droplets was found to be mainly dependent on height of the droplets when the size scale of the droplet is comparable to the size of the critical nucleus in at least one dimension, which indicates the nucleation behavior under confinement.