装备电子设备边界扫描系列标准及测试性设计技术研究

随着新一代电子产品的复杂化和密集程度的不断提高,电路和系统的可测试性急剧下降,传统测试技术已经不能满足需要。针对我国军用电子设备的测试及诊断工作需求,通过对IEEE1149系列边界扫描测试标准进行了研究分析,分析各标准的特征范围、适用对象、各标准相互关系,可以分析梳理IEEE1149标准在我国军用电子设备测试性设计中的可行性和适用性,探索得到将边界扫描技术在测试性设计上的应用思路。将边界扫描技术应用于电子设备不同范围的测试设计,能有效地解决传统测试性设计的问题,能够提升诊断能力,缩减产品生产周期及研制费用。     

边界元法循环平稳近场声全息理论研究

循环平稳声场是工程中经常遇到的一种特殊非平稳声场,声压信号受到调制作用,导致频谱出现边带现象,经典的近场声全息技术重建得到的声场无法反映声场的调制特性。在平面循环平稳近场声全息基础上,提出一种边界元法的循环平稳近场声全息技术,用二阶循环统计量理论代替传统的傅里叶分析,并以声压的循环谱密度取代其频谱及功率谱密度作为重建量,可用于循环平稳声场中具有复杂表面声源的辐射声场。由于循环谱密度对循环平稳信号具有解调功能,用该方法重建得到的循环谱密度能有效地反映调制和载波信号的信息。仿真分析与实验表明了本理论的有效性和精度能满足工程要求。     

Local leakage current behaviours of BiFeO3 films

The leakage current behaviours of polycrystalline BiFeO₃ thin films are investigated by using both conductive atomic force microscopy and current-voltage characteristic measurements. The local charge transport pathways are found to be located mainly at the grain boundaries of the films. The leakage current density can be tuned by changing the post-annealing temperature, the annealing time, the bias voltage and the light illumination, which can be used to improve the performances of the ferroelectric devices based on the BiFeO₃ films. A possible leakage mechanism is proposed to interpret the charge transports in the polycrystalline BiFeO₃ films.     

Simulation of ion beam extraction and focusing system

The characteristics of ion beam extraction and focused to a volume as small as possible were investigated with the aid of computer code SIMION 3D version 7. This has been used to evaluate the extraction characteristics (accel-decel system) to generate an ion beam with low beam emittance and high brightness. The simulation process can provide a good study for optimizing the extraction and focusing system of the ion beam without any losses and transported to the required target. Also, a study of a simulation model for the extraction system of the ion source was used to describe the possible plasma boundary curvatures during the ion extraction that may be affected by the change in an extraction potential with a constant plasma density meniscus.     

A Simple Calculation Approach for the Second－Harmonic Sound Beam Generated by an Arbitrary Distribution Source

We present a simple calculation approach for the fundamental and second-harmonic sound beams with an arbitrary distribution source in the quasilinear approximation. The analysis is based on the assumption that the source function with an arbitrary geometry and distribution is expanded into the sum of a set of two-dimensional Gaussian functions. The two- and five-dimensional integral solutions for the fundamental and second-harmonic fields are, respectively, reduced in terms of Gaussian functions and simple one-dimensional integrals. The numerical evaluation of field distributions is then greatly simplified.     

HL-2A等离子体的控制和边界识别

在托卡马克装置中，等离子体控制是一项重要的基础性工作，是托卡马克装置等离子体能够平衡、正常放电运行重要而基本的条件。这项工作包括等离子体电流、位置、形状、密度、电流分布、q值的控制和等离子体破裂控制等。其中电流、位置和密度的控制是圆截面等离子体的基础性工作；对于非圆截面装置，除了电流、位置和密度的控制之外，形状的识别和控制又是必不可少的基础性工作。这其中等离子体形状的识别和位置控制又是最复杂和最困难的。本论文给出了HL-2A装置等离子体电流和水平位移控制的理论模型和MATLAB仿真结果，并具体介绍了目前HL-2A装置等离子体控制系统的软、硬件组成。     

Interaction of Point Defects with Twin Boundaries in Copper

The interaction between small vacancy clusters and twin boundaries in copper is studied by using many-body potential developed by Ackland et aL for fcc metals. The interaction energies of single-, di- and tri-vacancy clusters with （111） and （112） twin boundaries are computed using well established simulation techniques. For （111） twins the vacancy clusters are highly repelled when they are on the adjacent planes, and are attracted when they are away from the boundary. In the case of （112） twins, vacancy clusters are more attracted to the boundary when they are near the boundary as compared to away from it. Vacancy clusters on both the sides of the boundary are also investigated, and it is observed that the clusters energetically prefer to lie on the off-mirror sites as compared to the mirror position across the twin.     

用丝电流方法快速识别HL-2A等离子体边界

利用等离子体外部测量的磁场信号,使用丝电流方法对HL-2A等离子体边界进行了快速识别。介绍了该方法的原理、相关的测量系统配置和该程序的研制进展。对识别结果进行了讨论。     

脉冲序列控制电流断续模式Buck变换器的动力学建模与边界碰撞分岔

通过建立一个开关周期内输出电容电荷变化量对应的输出电压变化量, 建立了工作于电感电流断续模式(discontinuous conduction mode, DCM)的脉冲序列(pulse train, PT)控制Buck变换器的近似离散时间模型, 研究了负载电阻及输入电压变化时PT控制DCM Buck变换器的边界碰撞分岔行为. 通过构造相应的迭代映射曲线, 分别分析了不同负载电阻时PT控制DCM Buck变换器的周期1、周期2和周期3运行轨迹的不动点稳定性, 揭示了PT控制DCM Buck变换器在不同周期态时的边界碰撞分岔的形成机理. 研究结果表明, 随参数变化, PT控制DCM Buck变换器始终运行在不同的周期态, 各周期态的切换由边界碰撞分岔引起, 李雅谱诺夫指数始终小于零. 利用PSIM电路仿真软件, 给出了不同负载电阻时的时域波形和相轨图. 实验结果验证了理论分析和仿真结果的正确性, 同时说明了本文动力学建模的可行性.     

一种辐射声场近似计算方法——单元辐射叠加法

提出一种基于表面振速预报辐射声场的近似方法——单元辐射叠加法。研究表明,声传递向量中的每项元素等于对应单元以单位速度振动、其它单元振速都为零时的辐射声压,即刚性障板上活塞面以单位速度振动时的辐射声压。在此基础上,利用刚性障板上单位速度振动活塞面的辐射声压直接建立表面振速与辐射声压之间的传递关系,根据这个传递关系对表面振速进行加权、求和便得到总的辐射声压。计算时采用规则形状障板面去拟合实际障板面,以规则形状障板上振动活塞面的辐射声压去近似实际障板上振动活塞面的辐射声压。相对于边界元方法,该方法在计算速度与存储空间上具有很大的优势。计算表明该近似方法是合理的、可行的。