声明

为扩大本刊及作者知识信息交流渠道,加强知识信息推广力度,本刊已许可中国学术期刊(光盘版)电子杂志社在CNKI中国知网及其系列数据库产品中,以数字化方式复制、汇编、发行、信息网络传播本刊全文。该著作权使用费及相关稿酬,本刊均用作为作者文章发     

基于委托代理理论的渠道成员激励机制分析

渠道冲突管理是渠道管理的重要内容,而渠道冲突管理的核心是设计有效的渠道成员激励机制。本文通过建立渠道成员激励的委托代理模型,得到渠道成员努力水平可以观测和不可观测下的最优激励合同,并对边际产出、成本系数、绝对风险规避程度、不确定性随机变量方差等因素对渠道成员激励机制的影响进行探讨。     

Effect of Channel Length and Width on NBTI in Ultra Deep Sub-Micron PMOSFETs

The effects of channel length and width on the degradation of negative bias temperature instability （NBTI） are studied. With the channel length decreasing, the NBTI degradation increases. As tile channel edges have more damage and latent damage for the process reasons, the device can be divided into three parts： the gate and source overlap region, the middle channel region, and the gate and drain overlap region. When the NBTI stress is applied, the non-uniform distribution of the generated defects in the three parts will be generated due to the inhomogeneous degradation. With tile decreasing channel length, tile channel edge regions will take up a larger ratio to the middle channel region and the degradation of NBTI is enhanced. The channel width also plays an important role in the degradation of NBTI. There is an inflection point during the decreasing channel width. There are two particular factors： the lower vertical electric field effect for the thicker gate oxide thickness of the sha/low trench isolation （STI） edge and the STI mechanical stress effecting on the NBTI degradation. The former reduces and the latter intensifies the degradation. Under the mutual compromise of the both factors, when the effect of the STI mechanical stress starts to prevail over the lower vertical electric field effect with the channel width decreasing, the inflection point comes into being.     

供应链营销渠道体系的研究

从供应链管理协调、优化的角度出发,探讨营销渠道的建设.以移动通讯行业为背景,提出了渠道协同应用的多目标规划模型,探讨了模型求解的方法,并以某移动分公司的数掘进行了算例分析.     

Improved mobility of AIGaN channel heterojunction material using an AIGaN/GaN composite buffer layer

The quality of an A1GaN channel heterojunction on a sapphire substrate is massively improved by using an A1- GaN/GaN composite buffer layer. We demonstrate an A10.4Gao.6N/AI0.18Ga0.82N heterojunction with a state-of-the-art mobility of 815 cm2/（V.s） and a sheet resistance of 890Ω/口 under room temperature. The crystalline quality and the electrical properties of the A1GaN heterojunction material are analyzed by atomic force microscopy, high-resolution X-ray diffraction, and van der Pauw Hall and capacitance-voltage （C-V） measurements. The results indicate that the improved electrical properties should derive from the reduced surface roughness and low dislocation density.     

易逝品价格连续下降情况下带有随机需求的供应链协调

本文研究了短生命周期产品价格随时间连续下降情况下单供应商和单销售商渠道中的供应链协调。分别建立了分散决策、集中决策和基于收入共享合同的最优订货策略模型,讨论了模型的相关性质,提出了一种基于收入共享合同的供应链协调策略,来实现整个供应链的协调。并指出该策略不仅适用于价格时变情况,能实现整个供应链的期望利润最大化,并且具有很好的适用性。最后,用实例仿真验证了本文所给出的模型和策略的有效性。     

双渠道供应链中的价格决策与服务决策研究

在集中式和分散式决策条件下,应用两阶段优化技术和Stackelberg博弈的理论与方法,对一个制造商与一个零售商组成的双渠道供应链,重点考虑了制造商在网络渠道的服务决策,建立了利润最大化模型,得到了最优的价格策略和服务策略,研究表明,网络渠道的服务水平对制造商和零售商的价格决策有着重要影响,而且消费者对网络直销渠道的偏好对制造商和零售商价格决策和服务决策会产生很大影响．     

多渠道供应链中的跨渠道退货服务策略研究

考虑在一个多渠道供应链结构中,零售商同时拥有实体店和网店,制造商开设直营网店且通过双渠道零售商销售产品。考虑消费者的无产品质量退货现象,研究了双渠道零售商为消费者提供跨渠道退货服务的多渠道整合问题。揭示了零售商愿意提供跨渠道退货服务的条件,探讨了跨渠道退货服务策略对市场均衡的影响,并且构建了制造商和零售商之间基于横向合作处理消费者退货的供应链机制,以改善双方的利润。     

考虑实体店公平关切的制造商线上渠道模式选择研究

通过构建双渠道供应链的博弈模型,研究实体店的纵向分配公平关切和横向同行公平关切对制造商线上渠道模式选择的影响。在理论研究的基础上,通过数值仿真得到的研究结果表明,当实体店纵向分配公平关切程度较低时,制造商应该选择线上直销模式;当实体店纵向分配公平关切程度较高时,若电商要求的租金比例较小,制造商会选择线上代销模式;如果电商要求的租金比例较大,制造商会选择线上直销模式。当满足一定的市场条件时,制造商和实体店将同时偏好线上直销模式或线上代销模式。     

Lattice Boltzmann simulation of flows in bifurcate channel at rotating inflow boundary conditions and resulted different outflow fluxes

The Lattice Boltzmann method(LBM) is used to simulate the flow field in a bifurcate channel which is a simplified model of the draft tube of hydraulic turbine machine.According to the simulation results,some qualitative conclusions can be deduced.The reason of uneven flux in different branches of draft tube is given.Not only the vortex rope itself,but also the attenuation of the rotation strength is important in bringing on the uneven flux.The later leads to adverse pressure gradient,and changes the velocity profile.If the outlet contains more than one exit,the one that contains the vortex rope will lose flux because of this adverse pressure gradient.Several possible methods can be used to minimize the adverse pressure gradient domain in order to improve the efficiency of turbine machine.