Synthesis and Crystal Structure of One Mixed- ligand Coordination Polymer Based on the Novel Terphenyl-2,5,2',5'-tetracarboxylic Acid Ligand

Solvothermal reaction of aromatic terphenyl-2,5,2',5'-tetracarboxylic acid (H 4 qptc) ligand and the transitional metal cation of Mn II in the presence of 3-(2-pyridyl)pyrazole (pp) affords one new coordination polymer, [Mn(qptc)0.5(pp)2]n·n(H2O) (1). The structure has been determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR, TGA, and magnetism. The carboxyl groups of qptc 4-exhibit a μ1-η1 :η 0 coordination mode, and the qptc4- acts as a H-shaped ligand linking the Mn Ⅱ centers together to form a 2D polymeric [Mn(qptc) 0.5 ] n layer. The crystal of 1 crystallizes in orthorhombic, space group Pbca with a=9.3119(12), b=20.848(3), c=26.134(3) , V=5073.4(11) 3 , Z=8, C27H19MnN6O5 , Mr=562.42, Dc=1.473 g/cm3 , F(000)=2304 and μ(MoKα)=0.571 mm-1 . The final R=0.0468 and wR=0.1196 for 4429 observed reflections with I > 2σ(I) and R=0.0797 and wR=0.1383 for all data.     

混合钴源对Co-Pd/TiO2催化剂催化CH4-CO2两步梯阶转化法合成乙酸的性能影响

以混合钴源为前驱体, 采用等体积浸渍法制备了Co-Pd/TiO2催化剂, 考察了其对CH4和CO2梯阶转化直接合成乙酸的催化性能, 采用XRD, XPS, NH3-TPD和BET对催化剂进行了表征. 结果表明, 催化剂具有适宜的表面酸性、 高比表面积和孔结构, 有利于提高催化剂的活性. 在m(CoCl2)∶m=2∶5, m(Co)∶m(Pd)=2∶1, 常压, 150 ℃条件下, 乙酸的生成速率达到6.13 mg·g-1Cat·h-1, 选择性达到 81.6%, 分别比以单一Co源制备的催化剂提高了134%和16%.     

基于样本库的人脸图像处理方法

本文给出了一种基于样本库的人脸图像超分辨率方法,这一方法结合了人脸图像全局相似性和局部特征相似性的约束.局部结构的相似性将超分辨率解约束到人脸局部结构空间,不同尺度上的局部相似性指导搜索最优解,然后将局部结构重建的人脸图像投影到由人脸图像确定的特征人脸空间.实验结果表明该算法得到的人脸具有很好的准确性和视觉效果.     

微波消解试样-电感耦合等离子体质谱法测定鱼体中锌、铁、铅、铬、镉和汞的含量

重金属是具有潜在危害的重要污染物,它会被湖泊或海洋中沉积物或悬浮物所吸附,并在生物体内富集,成为持久污染物,对环境造成严重的污染。水体一旦受到严重的重金属污染,生物的食用卫生质量就会受到影响。金属元素含量的测定多采用原子吸收光谱法,其灵敏度高,准确性好,但不能实     

Oxygen permeation and phase structure properties of partially A-site substituted BaCo_(0.7)Fe_(0.225)Ta_(0.075)O_(3-δ) perovskites

Ba0.9R0.1Co0.7Fe0.225Ta0.075O3-δ(BRCFT, R = Ca, La or Sr) membranes were synthesized by a solid-state reaction. Metal cation Ca2+,La3+or Sr2+doping on A-site partially substituted Ba2+in BaCo0.7Fe0.225Ta0.075O3-δoxides, and its subsequent effects on phase structure stability, oxygen permeability and oxygen desorption were systematically investigated by XRD, TG-DSC, H2-TPR, O2-TPD techniques and oxygen permeation experiments. The partial substitution with Ca2+, La3+or Sr2+, whose ionic radii are smaller than that of Ba2+, succeeded in stabilizing the cubic perovskite structure without formation of impurity phases, as revealed by XRD analysis. Oxygen-involving experiments showed that BRCFT with A-site fully occupied by Ba2+exhibited good oxygen permeation flux under He flow, reaching about 2.3mL min-1 cm-2at 900 ℃ with 1 mm thickness. Of all the membranes, BLCFT membrane showed better chemical stability in CO2, owing to the reduction in alkalinity of the mixed conductor oxide by La doping. In addition, we also found the stability of the perovskite structure under reducing atmospheres was strengthened by increasing the size of A-site cation(Ba2+La3+Sr2+Ca2+).     

Poly(amide-6-b-ethylene oxide)/SAPO-34 mixed ma-trix membrane for CO2separation

In this paper, poly（amide-6-b-ethylene oxide） （Pebax1657）/SAPO-34 mixed matrix membranes （MMMs） were prepared by solvent-evaporation method with acetic acid as a novel solvent. CO2, N2, CH4 and H2 permeation properties were investigated, and the physical properties of Pebax/SAPO-34 MMMs were characterized by XRD and SEM. At low SAPO-34 content, it was homogeneously distributed in the Pebax ma- trix, and then precipitated and agglomerated at high SAPO-34 content. The crystallinity of Pebax phase in Pebax/SAPO-34 MMMs decreased initially and then rebounded as a result of phase separation. With the increase of transmembrane pressure difference, CO2 permeability was en- hanced due to the effect of pressure-induced plasticization. Owing to the happening of stratification, the CO2 permeability of Pebax/SAPO-34 MMMs （50 wt% SAPO-34） increased to 338 Barrer from 111 Barrer of pristine Pebax, while the selectivities of CO2/CH4 and CO2/N2 were almost unchanged. Compared with the pristine Pebax, the gas separation performances of Pebax/SAPO-34 MMMs were remarkably enhanced.     

Synthesis and Characterization of Biodegradable Alternating Polyesteramides from Mixed Diamidediols and Sebacic Acid

A series of polyesteramide prepolymers[PrePEA（0/4,8）s] having mixed alternating bisesterdiamide units was synthesized via melt polycondensation from N,N＇-bis（2-hydroxyethyl）oxamide（0） and N,N＇-bis（2-hydroxyethyl）-adipamide（4） with sebacic acid（8） at different molar ratios.Chain extension of them was conducted with 2,2＇-（1,4-phenylene）-bis（2-oxazoline） and adipoyl biscaprolactamate as combined chain extenders.The chain extended polyesteramides[ExtPEA（0/4,8）s] were characterized by proton nuclear magnetic resonance（1H NMR）,gel permeation chromatography（GPC）,differential scanning calorimetry（DSC）,thermogravimetry analysis（TGA）,wide angle X-ray scattering,tensile test and enzymatic degradation.The results show that ExtPEA（0/4,8）s were crystalline polyesteramides.They had Tm up to 136.5 ℃ and initial decomposition temperature above 297.5 ℃.They crystallized in similar crystallites into Nylon-66 and degraded under the catalysis of protease or lipase.They are thermoplastic materials with tensile strength up to 21.5 MPa and elongation at break above 64.0％.     

Nano-crystalline FeOOH mixed with SWNT matrix as a superior anode material for lithium batteries

Nano-crystalline FeOOH particles(5～10 nm) have been uniformly mixed with electric matrix of single-walled carbon nanotubes(SWNTs)for forming FeOOH/SWNT composite via a facile ultrasonication method. Directly using the FeOOH/SWNT composite(containing 15 wt%SWNTs) as anode material for lithium battery enhances kinetics of the Li+insertion/extraction processes, thereby effectively improving reversible capacity and cycle performance, which delivers a high reversible capacity of 758 mAh g-1under a current density of 400 mA g-1even after 180 cycles, being comparable with previous reports in terms of electrochemical performance for FeOOH anode. The good electrochemical performance should be ascribed to the small particle size and nano-crystalline of FeOOH, as well as the good electronic conductivity of SWNT matrix.     

金属有机骨架材料/聚酰亚胺混合基质膜的制备及气体分离性能

合成了3种不同结构、 粒径和气体吸附性能的金属有机骨架材料(MOFs): 微米级Cu₃(BTC)₂、 亚微米级ZIF-8和S-Cu₃(BTC)₂. 氮气吸附等温线分析结果表明, ZIF-8和Cu₃(BTC)₂具有较大比表面积(1653和1439 m²/g), S-Cu₃(BTC)₂的比表面积为171.4 m²/g. 用共混法将MOFs直接引入聚酰亚胺中制备了MOFs/聚酰亚胺混合基质膜(MMMs). X射线衍射(XRD)和全反射红外光谱(FTIR-ATR)分析结果表明, MOFs在混合基质膜中保持物理和化学稳定. 气体渗透测试结果表明, MOFs的加入使膜的气体渗透分离性能明显提高, S-Cu₃(BTC)₂使渗透系数增加了1.75倍; ZIF-8和Cu₃(BTC)₂使渗透系数增加了3倍左右; 同时, 膜的气体分离系数变化很小.     

分子动力学模拟研究[Bmim][PF_6]+水+醇三元体系的微观结构和分子间相互作用(英文)

研究离子液体体系的微观结构和分子间相互作用具有重要意义.本文对1-丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF6])+水+乙醇和[Bmim][PF6]+水+异丙醇三元体系进行了分子模拟研究,计算了径向分布函数和不同组成的水-醇混合溶剂与离子液体阴阳离子间的相互作用能,并将其分解为库仑相互作用能和Lennard-Jones(LJ)势能.在此基础上,研究了溶液体系的微观结构、分子间相互作用和相行为.结果表明,水倾向于与离子液体阴离子和阳离子极性部分作用,醇倾向于与阴离子和阳离子非极性部分作用;库仑力主导阴离子-溶剂相互作用,色散力主导阳离子-溶剂相互作用,阴阳离子的缔合状态对色散力影响较小,对库仑力的影响非常显著.