BICENTRAL POLYMER SUPPORTED PHASE TRANSFER CATALYST POLYSTYRENE—SUPPORTED POLYETHYLENE GLYCOL AND PYRIDINIUM SALT

A bicentral polymer-supported phase transfer catalyst,polystyrene-supported polyethylene glycol and pyridinium salt(PS-Py-PEG-400),synthesized with chloromethylated polystyrene as supporter on which PEG and pyridinium salt were immobilized successively.Its catalytic activity was tested for the reaction of solid potassium acetate and benzyl bromide by GC analysis.It was found that the bicentral catalyst performed higher activity than the monocentral PS-PEG-400 and PS-Py.     

酞菁钴液相催化氧化羰基硫(COS)的研究

本文首次报道在液相中，用金属酞菁催化氧化脱除羰基硫（COS）。发现COS先被水解成HS~－，HS~-再被氧化成S，酞菁钴（CoPC）的活性高于其它金属酞菁（MPC），酞菁苯环上推电子基因使酞菁的催化活性提高，双核酞菁钴的活性高子单核酞菁钴。D296树脂负载的酞菁钴的催化活性高于均相酞菁钴的活性。     

5－（4－乙酰氧基苯基），10，15，20－三苯基卟啉金属配合物修饰的铂支撑双层脂膜的IV性质

合成并表征了５－（４－乙酰氧基苯基），１０，１５，２０－三苯基卟啉及其金属配合物，将它们作为修饰物，制得铂支撑的双层脂膜，用循环伏安法研究了抗坏血酸的氧化还原反应，并对其机理作了探讨。     

铜中杂质成分标准物质的研制

介绍铜中9种杂质成分标准物质的研制方法。以1号纯铜为基体，配入硫、铁、铅、锌、镍、铋、锑、磷、砷及锡共10种杂质成分，采用雾化喷粉加工工艺，保证了样品的均匀性。对样品表面作了抗氧化保护处理。采取多家实验室协作定值的方式对除砷外的9种杂质成分进行定值。5年的跟踪检验结果表明，该标准物质稳定性良好。     

均匀棒状过氧化氢合碳酸钠制备及非等温热分解动力学

本文制备了均匀棒状过氧化氢合碳酸钠，化学分析确定其组成为Na₂CO₃·1.5H₂O₂，用DTA-TG-DTG技术并辅以X-ray分析研究了它在静态空气、流动氧气和流动氮气气氛中的非等温热分解过程及动力学。     

Synthesis and Asymmetric Enantioselective Addition of Chiral Polybinaphthyl and Polybinaphthol I.igands

Four chiral polymers P-1, P-2, P-3 and P-4 were synthesized by the polymerization of （S）-2,2＇-dioctoxy-1,1＇- binaphthyl-6,6＇-boronic acid （S-M-3） with （S）-6,6＇-dibromo-1,1＇-binaphthol （S-M-1）, （R）-6,6＇-dibromo-1,1＇- binaphthol （R-M-1）, （S）-3,3＇-diiodo-1,1＇-binaphthol （S-M-2） and （R）-3,3＇-diiodo-1,1＇-binaphthol （R-M-2） under Pd-catalyzed Suzuki reaction, respectively. All four polymers can show good solubility in some common solvents due to the nonplanarity of the polymers in the main chain backbone and flexible alkyl groups in the side chain. The analysis results indicate that specific rotation and circular dichroism （CD） spectral signals of the alternative S-S chiral polymers P-1 and P-3 are larger than those of S-R chiral polymers P-2 and P-4, but their UV-Vis and fluorescence spectra are almost similar. The results of asymmetric enantioselectivity of four polymers for diethylzinc addition to benzaldehyde indicate that catalytically active center is （R） or （S）-1, 1＇-binaphthol moieties.     

高多孔度多孔硅自支撑膜的制备与表征

发光多孔硅由于在光电子学方面的应用前景而引起人们极大的关注[1]．最近多孔硅发光二极管的研究方面取得了重大进展[2]。但是，有关多孔硅的发光机制仍然存在着争论[1，3，4]，利由于消除了单晶硅衬底的影响，对脱离了硅衬底的多孔硅自支撑膜能够进行普通多孔硅所不能进行的一     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

ADSORPTION OF 2,4-D ON MODIFIED HYPERCROSSLINKED POLYSTYRENE （NDA-99） AND XAD-4 RESIN

The adsorption behavior of pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution has been investigated using a hypercrosslinked polystyrene adsorbent (NDA-99) modified by dimethylamine group as well as a nonionic macroporous adsorbent (XAD-4). The Langmuir and Freundlich isotherm models were employed to fit the experimental data to describe adsorption mechanism. It shows that NDA-99 resin exhibits an adsorption affinity for 2,4-D higher than XAD-4 resin owing to its exceptional micropore structure and the amine group of the hypercrosslinked matrix.Further studies indicate that the hydrogen bonding interaction and the stronger π-π conjugation play a significant role in the course of the adsorption of 2,4-D on NDA-99 resin, which is in agreement with the IR spectroscopic results and the △E values of HOMO (the highest occupied molecular orbit) of adsorbent and LUMO (the lowest unoccupied molecular orbit) of adsorbate calculated from the MINDO/3 model.     

钴离子在P507为载体的支撑液膜中的传输

本文用国内的膜材料设计了以2-乙基已基膦酸单(2-乙基已基)酯(HEH(EHF),P_(507))为载体的支撑液膜迁移钴的实验,获得的数据为深入实验提供了依据.基本原理支撑液膜(SLM)是依靠微孔塑料薄膜(支撑体)微孔的毛细管作用将含萃取剂(载体)的有机溶液吸附在支撑体上.P_(507)萃取钴表示为: