基于形态学成分分析的静态极光图像分类算法

为了解决海量极光图像手工分类效率低下的问题,提出一种静态极光图像自动分类系统,使用形态学成分分析将极光纹理从复杂背景中分离出来,从纹理中提取特征并利用支持向量机进行分类.实验结果表明:该算法分类正确率较之于传统方法均提高约10%,当分类器支持向量机+线性核函数时,分类速度最快,最适合于海量数据的处理.     

镁合金电子结构与腐蚀特性研究

采用递归法计算了镁合金电子结构.研究发现Mg的态密度在晶内与表面接近,当表面有氧或氢氧时态密度形状改变很大,因此Mg在晶内、表面性质是接近的,但当合金表面渗透氧或氢时,合金性质有明显变化.Al,Y,La三种元素在晶体表面的掺杂原子镶嵌能均低于各自在晶内的掺杂原子镶嵌能,Al, Y, La从晶内向晶体表面扩散、并在合金表面偏聚.Al-O, Y-O, La-O, Mg-O及Mg-O-H间的亲和能均为负数,这些原子间存在亲和力,可以在合金中相互作用形成化合物.由于Mg-O-H间的亲和能远低于Mg-O的亲和能,因此Mg(OH)₂比MgO更稳定.氧化初期氧与Mg, Al, Y, La等生成氧化物,当合金与腐蚀介质接触时,MgO与腐蚀介质中的水发生反应生成Mg(OH)₂.Al₂O₃,（Y,La）₂O₃及Mg(OH)₂能对合金起到保护作用,提高合金的耐腐蚀性能.     

高功率激光驱动器光束自动准直目标定位算法

为满足高功率激光驱动器光束自动准直的高精度和实时性要求,提出了一种快速高精度的自动准直目标定位算法。首先利用变结构元广义数学形态学边缘检测算法在充分提取图像边缘细节信息的同时抑制图像噪声的影响,然后采用拉格朗日多项式插值算法对圆目标轮廓进行快速亚像素定位,最后利用最小二乘拟合以及几何形心拟合的方法实现图像中光斑目标中心的精确定位。该算法在神光Ⅱ升级装置的光路自动准直中得以验证,实验结果表明八路预放光路准直时间小于3 min,主放光路准直时间小于7 min,主放输出光束近场准直准确度优于0.2%,远场指向准确度优于0.2(RMS)。     

Penetrating view of nano-structures in Aleochara verna spermatheca and flagellum by hard X-ray microscopy

A penetrating view of the three-dimensional nanostructure of female spermatheca and male flagellum in the species Aleochara verna is obtained with 100-nm resolution using a hard X-ray microscope, which provides a fast noninvasive imaging technology for insect morphology. Through introducing Zernike phase contrast and heavy metal staining, images taken at 8 keV displayed sufficient contrast for observing nanoscale fine structures, such as the spermatheca cochleate duct and the subapex of the flagellum, which have some implications for the study of the sperm transfer process and genital evolution in insects. This work shows that both the spatial resolution and the contrast characteristic of hard X-ray microscopy are quite promising for insect morphology studies and, particularly, provide an attractive alternative to the destructive techniques used for investigating internal soft tissues.     

Open critical area model and extraction algorithm based on the net flow-axis

In the integrated circuit manufacturing process, the critical area extraction is a bottleneck to the layout optimization and the integrated circuit yield estimation. In this paper, we study the problem that the missing material defects may result in the open circuit fault. Combining the mathematical morphology theory, we present a new computation model and a novel extraction algorithm for the open critical area based on the net flow-axis. Firstly, we find the net flow-axis for different nets. Then, the net flow-edges based on the net flow-axis are obtained. Finally, we can extract the open critical area by the mathematical morphology. Compared with the existing methods, the nets need not to divide into the horizontal nets and the vertical nets, and the experimental results show that our model and algorithm can accurately extract the size of the open critical area and obtain the location information of the open circuit critical area.     

静动结合的化学腐蚀法制备近场光学探针的理论分析

理论上分析了静动结合的化学腐蚀法制备探针的具体机理及过程。在静态腐蚀的过程中, 利用流体力学Young-Laplace方程的一级近似解获得了光纤插入到HF酸中形成的新月形高度。在动态腐蚀过程中, 详细分析了当静态腐蚀时间和动态腐蚀时间分别取不同值时, 光纤移动速度对光纤探针结构的影响。利用此法可制备出尖端锐利、大锥角或多锥体等各种结构的光纤探针。这为实验上制备出性能优良的探针, 为拓宽扫描近场光学显微镜的应用范围奠定基础。将上述理论分析的结果与本文实验中所得初步结果进行了比较, 所得结果一致。     

A Stable Porous Silicon Dielectric Reflector with a Photonic Band Gap Centred at 10μm

By pulsed anodic etching at low temperature, we prepared a porous silicon reflector with a photonic band gap centred in the long-wavelength infrared spectral region （centred at about 12 μm）. After proper oxidation process, the stable reflector structure, which can reflect electromagnetic wave from 8 μm to 12 μm （centred at 10 μm） within wide incidence angles （about 50°）, is obtained. The wavelength shift of absorption peak of Si-H and Si-O shows the influence of oxidation process and indicates the stability of oxidized porous silicon dielectric reflector, which offers possible applications for the room temperature infrared sensor.     

提高多光源汇聚光斑中心定位精度的形态学滤波方法

在激光指令传输中,为形成较大的光覆盖区域并增大光源的作用距离,将多个特性相同的激光器矩阵排列,构成组合光源。针对点阵多激光管光源在开放环境下成像光斑具有多个光能中心的特点,采用形态学滤波中的开启、闭合运算,去除背景噪声斑点,平滑光斑内部的小光斑叠加和干涉造成的不规则条、孔,使得能以简化的分割和定位算法,快速获得接近实际的完整光斑边界,光斑中心定位精度的均方差不大于1.2%。该方法能快速、高精度定位这种叠加光斑的中心,为远距离激光对准和测控提供了可靠的精度和时效保证。     

流动条件下两种不同亲水基团咪唑啉型缓蚀剂的缓蚀性能

选择了两种含有不同亲水基团的咪唑啉型缓蚀剂, 即1-胺乙基-2-十一烷基咪唑啉(AEI-11)和1-羟乙基-2-十一烷基咪唑啉(HEI-11), 分别在静态及动态条件下,采用失重法、极化曲线法、电化学阻抗谱法研究了上述缓蚀剂对N80钢在CO2饱和的3%(w)NaCl溶液中的缓蚀性能. 研究结果表明, 无论在静态和动态条件下, HEI-11均表现出更佳的缓蚀性能, 即咪唑啉型缓蚀剂的缓蚀性能与亲水基团的极性成正比; 在流动条件为5 m·s-1时, 缓蚀剂的缓蚀效率显著降低. 为了进一步研究缓蚀剂的缓蚀性能与其结构的关系, 运用量子化学法计算了缓蚀剂的EHOMO(最高占有分子轨道)、ELUMO(最低空分子轨道), 结果表明缓蚀剂的缓蚀效率与EHOMO成正比, 与ELUMO及ELUMO与EHOMO的差值驻E成反比.     

Cr2AlC在氢氟酸溶液中的腐蚀行为研究

通过液相搅拌对铬粉、铝粉和石墨粉进行混料,经无压烧结制备出高纯度的Cr2 AlC粉末,同时研究了制备出的Cr2 AlC粉末在室温搅拌条件下氢氟酸溶液中的反应行为,结果表明,氢氟酸的浓度和反应时间会影响Cr2 AlC腐蚀的过程和最终产物,随着氢氟酸浓度的增加和反应时间的延长,在搅拌辅助下,Cr2 AlC逐渐被氢氟酸腐蚀,生成CrF3·3H2 O,其形貌也由Cr2 AlC的层状结构转变成疏松结构的纳米颗粒,而腐蚀过程中没有搅拌辅助时,反应产物为Al2 O3和Cr7 C3.