Biological evaluation of 2-methylpyrimidine derivatives as active pan Bcr-Abl inhibitors

We designed a series of 2-methylpyrimidine derivatives as new BCR-ABL inhibitors using scaffold-hopping strategy.These synthetic compounds exhibited significant inhibition against a broad spectrum of Bcr-Abl mutants including the gatekeeper T315I mutant.Compound 7u showed very potent kinase inhibitory activities against Bcr-Abl WT,Bcr-Abl E255K,Bcr-Abl Q252H,Bcr-Abl G250E and Bcr-Abl T315I,with IC50 values of 0.13 nM,0.17 nM,0.24 nM,0.19 nM and 0.65μM,respectively.This compound also displayed anti-proliferation activity against K562 cell line with an IC50 value of 1.1 nM,thus representing a new lead for further optimization.     

Photofragment translational spectroscopy at 304 nm from C-H symmetric stretch excited CH3I [v 1 = 1]

The 304 nm photodissociation of the C-H symmetric stretch excited CH3I[v1=1,v2=0](v1 denotes the C-H symmetric stretch mode,and v2 denotes the umbrella mode)is studied with our simple photofragment translational spectrometer.An IR laser is used to excite the ground state CH3I[0,0]to the C-H symmetric stretch excited CH3I[1,0].With IR laser OFF and ON,the fractions of photofragments CH3(ν1,ν2)from the 304 nm photodissociation of CH3I[1,0]have been determined through the photofragment translational spectra(PTS)from measuring I and I*and also through the PTS from measuring CH3(0,0)(1,0)(0,1)and(1,1).The experimental results show that the C-H symmetric stretch vibration(v1=1)in parent molecules is about 66%retained in the photofragments in the I channel,but only 24%in the I*channel.The populations of photofragments CH3(0,2)and(0,3)are higher than CH3(0,0)and(0,1),showing strong inverted population both in I and I*channels.     

聚合方法对聚苯胺性能的影响北大核心CSCD

分别通过苯胺的化学氧化以及N,N-二氯对苯醌二亚胺与对二溴苯格氏试剂在Ni(Ⅱ)配合物催化下共聚等两种方法合成了聚苯胺。对两种方法所获得的聚合物通过红外光谱(FT-IR)、紫外可见吸收光谱(UVVis)、循环伏安(CV)、充放电等对聚合物进行了表征和性能测试。结果表明,化学氧化法合成聚苯胺的紫外-可见吸收光谱中,在600nm处出现最大吸收峰,而金属配合物催化法合成的聚合物最大吸收峰出现在443nm。两种聚合物都具有可逆的氧化-还原性能,其氧化峰分别出现在0.26eV和0.49eV处。     

光学适配体传感器检测赭曲霉毒素A的研究进展

赭曲霉毒素A(Ochratoxin A,OTA)是真菌产生的次级代谢产物,性质稳定,不易去除,人体摄入后将产生严重的健康危害。数十年来,核酸适配体不断发展,成为生物传感器的重要识别元件之一,适体传感器被广泛用于生物、医药、疾病等分析检测。本文总结了用于检测OTA的经典方法和基于核酸适配体的生物传感器方法,并主要从光学适配体传感器方面阐述了近年用于检测赭曲霉毒素A的适配体传感器,并对其进行了总结和展望。     

Insight into the Excellent Tribological Performance of Highly Oriented Poly(phenylene sulfide)

Achieving low friction and wear of poly(phenylene sulfide)(PPS) without using fillers or blending is a challenging task, but one of considerable practical importance. Here we describe how neat PPS with high tribological performance is achieved by manipulating processing parameters(pressure, flow and temperature). The key to achieving high tribological performance is comparatively high molecular chain orientation, realized in neat PPS, at high shear rates and low pressure. The friction coefficient and wear rate are as low as ~0.3 and~10^-6 mm³·N^-1·m^-1, respectively, which break the record for neat PPS. These values are even better than those for PPS-based blends and comparable to PPS composites. Further studies show, for the first time, that wear rate decreases exponentially with increasing molecular chain orientation, prompting us to revise the classical Archard's law by including the effect of molecular chain orientation. These findings open the possibility of using neat PPS in highly demanding tribological applications.     

温敏型Keratin/PNIPAM水凝胶的制备及其对重金属离子的吸附性能和机理研究

以羽毛中提取的角蛋白为原料,N-异丙基丙烯酰胺（NIPAM）为温敏性单体,采用一锅法制备了对温度敏感的双网络型角蛋白/PNIPAM水凝胶,并对其结构、膨胀性能、吸附特性、吸附选择性及吸附机理进行了研究。结果表明,温敏型角蛋白/PNIPAM水凝胶符合负向温敏凝胶的特征,在高于低临界转变温度时凝胶排水收缩,在低于低临界转变温度时凝胶迅速吸水膨胀;温敏型角蛋白/PNIPAM水凝胶随着pH的增大对重金属Pb（Ⅱ）的吸附容量逐渐增大,在pH 5时达到最大吸附容量78.63 mg/g。温敏型角蛋白/PNIPAM水凝胶在吸附重金属Pb（Ⅱ）的过程中仅用30 min即可达到吸附平衡,对Pb（Ⅱ）的最大吸附容量为415.73 mg/g。吸附模型拟合和吸附动力学分析结果表明温敏型角蛋白/PNIPAM水凝胶符合Langmuir吸附模型（R²=0.992）,属于单层吸附。吸附动力学模型分析显示该凝胶符合准二级动力学模型,以化学吸附为主,物理吸附为辅。     

“一锅法”制备氨基官能化介孔二氧化硅用于吸附As(V)EI北大核心CSCD

采用3-[2-(2-氨基乙基氨基)乙基氨基]丙基-三甲氧基硅烷(AAAPTS)为单体,通过“一锅法”制备了一种氨基官能化介孔二氧化硅吸附材料用于吸附As(V)。通过傅立叶红外光谱(FT-IR)、扫描电镜(SEM)和氮气吸附-脱附分析对材料进行表征,并对吸附条件进行优化。结果表明,氨基官能化介孔二氧化硅在吸附环境为pH 3,温度25℃,吸附时间30 min时达到最佳吸附效果,其饱和吸附量为93.74 mg/g。动力学吸附、等温吸附实验结果表明,合成的材料符合伪二阶动力学模型且属于单层吸附的化学结合过程。本研究为去除环境水样品中的As(V)提供了潜在吸附材料。     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

采用K₃[Fe(CN)₆]作为锌镍电池的电解液添加剂,克服了锌阳极的变形。此外,通过一系列实验设计和表征,探索了电解液中金属锌与K₃[Fe(CN)₆]的反应机理。通过XRD (X-ray diffraction)和XPS (X-ray photo-electron spectroscopy)测试,我们发现金属锌在KOH水溶液中能够与K₃[Fe(CN)₆]反应,将[Fe(CN)₆]^3–还原为[Fe(CN)₆]⁴⁻。添加K₃[Fe(CN)₆]的锌镍电池实现了更长的循环寿命,比不添加K₃[Fe(CN)₆]的锌镍电池长3倍以上。在相同循环次数下,改性电解质中锌阳极循环不仅形状变化较小,而且没有出现“死”锌现象,电极添加剂和粘结剂也没有发生偏析。此外,不同于一般的有机添加剂,K₃[Fe(CN)₆]的加入不仅不会增大电极的极化,还能够提高锌镍电池的放电容量和倍率性能。因此,考虑到这一改性策略有着较高的可行性和较低的成本,K₃[Fe(CN)₆]添加剂在锌镍电池的实际应用中具有极大的推广潜力。     

纳米催化剂在CO_(2)加氢制甲醇中的研究进展北大核心CSCD

为减缓温室效应,将CO_(2)转换成高附加值的甲醇是减少CO_(2)排放的有效途径,而高效催化剂是CO_(2)加氢制甲醇反应规模化的关键.可调控合成的具有量子尺寸效应的纳米催化剂在该反应上具有独特的优势.因此我们深入探讨了反应机理,综述了纳米材料在CO_(2)加氢制甲醇中的研究进展,最后给出了高效催化剂可能的发展方向.     

基于探针底物法的高效液相色谱-串联质谱法测定蚯蚓体内4种CYP同工酶活力及其应用北大核心CSCD

基于探针底物法,将蚯蚓微粒体悬浮液加入至含有混合探针底物香豆素(50μmol·L^(-1))、安非他酮(25μmol·L^(-1))、阿莫地喹(50μmol·L^(-1))、右美沙芬(5μmol·L^(-1))的孵育体系中(微粒体蛋白质量浓度需控制在32~96 mg·L^(-1)内),于37℃孵育20 min后,加入甲醇终止反应,静置10 min后过0.22μm滤膜,采用高效液相色谱-串联质谱法测定对应的代谢物7-羟基香豆素、羟基-安非他酮、N-脱乙基阿莫地喹、右啡烷的生成量。根据相应代谢物的生成量分别评价蚯蚓CYP2A6、CYP2B6、CYP2C8及CYP2D6酶活力。采用Acquity UPLC HSS T3柱作为分离柱,以不同体积比的含1 mmol·L^(-1)乙酸铵的0.05%(φ)甲酸溶液和甲醇的混合溶液作为流动相进行梯度洗脱,串联质谱中采用电喷雾离子源正离子模式和多反应监测模式检测,并用基质匹配法配制混合标准溶液系列。结果显示:7-羟基香豆素、羟基-安非他酮、N-脱乙基阿莫地喹、右啡烷的质量浓度均在2.5~50μg·L^(-1)内与其对应的峰面积呈线性关系;对空白样品进行3个浓度水平的加标回收试验,回收率为73.7%~103%,日内相对标准偏差(RSDs,n=5)为2.1%~11%,日间RSDs(n=5)为4.6%~10%。方法用于分析分别暴露于多壁碳纳米管染毒土壤(暴露组)和普通土壤(对照组)21 d后蚯蚓体内4种CYP同工酶的活力,CYP2C8酶活力明显高于CYP2A6、CYP2B6及CYP2D6,暴露组中CYP2A6及CYP2C8酶活力显著(P<0.05)高于对照组,而CYP2B6及CYP2D6酶活力与对照组的无显著性差异,因此推测可将CYP2A6及CYP2C8作为一套生物标记物,用于定性诊断土壤的多壁碳纳米管污染。