水分子凝聚体系的介孔结构分形学

透射电镜研究表明，4,40-双硬脂酰胺基二苯醚在水中聚集、自组装成缠绕细纤维状聚集体，进而使整个体系形成三维网络结构．水分子被包囊在这个网络结构中，形成一种新型的凝聚体系(水分子凝胶)．水分子凝胶是一种典型的纳米介孔物质，其复杂的微孔结构可以用分形维数D来表征，通过气体吸附方法(孔度法和比表面积法)计算，求得水分子凝胶体系的微孔结构的分形维数为2.1?2.2．对于纤维状三维网络结构的分形表征，通过粘度法和Cayley分形树模型得出分形维数为1.98．由此推测其分形网络形成的过程是一个初始成核-生长-枝化的循环过程．     

GISAXS and SAXS studies on the spatial structures of Co nanowire arrays

The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering (SAXS) techniques. Compared with SEM observation, the GISAXS and SAXS measurements can get more overall structural information in a large-area scale. In this study, the two-dimensional GISAXS pattern was well reconstructed by using the IsGISAXS program. The results demonstrate that the hexagonal lattice formed by the Co nanowires is distorted (a ≈ 105 nm, b ≈ 95 nm). These Co nanowires are isolated into many structure domains with different orientations with a size of about 2 μm. The SAXS results have also confirmed that the nanopore structures in the AAM can be retained after depositing Co nanowires although the Co nanowires can not completely but only just fill up the nanopores. These results are helpful for understanding the global structure of the Co nanowire array.     

介孔材料MCM-41的导热研究

文章根据二氧化硅介孔材料MCM-41纳米孔结构特点,首先建立和验证了纳米结构单元模型,然后使用平衡分子动力学方法模拟了孔壁热导率;接着耦合孔隙内气体导热,开展了一维传热分析,最终提炼出MCM-41的有效热导率表达式;并对壁厚、孔径和孔隙率对热导率的影响进行了分析.研究结果表明,MCM-41具有良好的绝热性能,其有效热导率随孔隙率增大近似呈线性减小,且表现出各向异性;导热性能沿孔道长度方向表现出准一维特性. 关键词： 有效热导率 介孔材料 MCM-41 平衡分子动力学     

Multipeak-structured photoluminescence mechanisms of as-prepared and oxidized Si nanoporous pillar arrays

Silicon dominates the electronic industry, but its poor optical properties mean that it is not preferred for photonic applications. Visible photoluminescence (PL) was observed from porous Si at room temperature in 1990, but the origin of these light emissions is still not fully understood. This paper reports that an Si nanocrystal, silicon nanoporous pillar array (Si-NPA) with strong visible PL has been prepared on a Si wafer substrate by the hydrothermal etching method. After annealing in O₂ atmosphere, the hydride coverage of the Si pillar internal surface is replaced by an oxide layer, which comprises of a great quantity of Si nanocrystal (nc-Si) particles and each of them are encapsulated by an Si oxide layer. Meanwhile a transition from efficient triple-peak PL bands from blue to red before annealing to strong double-peak blue PL bands after annealing is observed. Comparison of the structural, absorption and luminescence characteristics of the as-prepared and oxidized samples provides evidence for two competitive transition processes, the band-to-band recombination of the quantum confinement effect of nc-Si and the radiative recombination of excitons from the luminescent centres located at the surface of nc-Si units or in the Si oxide layers that cover the nc-Si units because of the different oxidation degrees. The sizes of nc-Si and the quality of the Si oxide surface are two major factors affecting two competitive processes. The smaller the size of nc-Si is and the stronger the oxidation degree of Si oxide layer is, the more beneficial for the luminescent centre recombination process to surpass the quantum confinement process is. The clarification on the origin of the photons may be important for the Si nanoporous pillar array to control both the PL band positions and the relative intensities according to future device requirements and further fabrication of optoelectronic nanodevices.     

强流束晕-混沌的外部磁场开关控制

研究了强流离子束在周期聚焦磁场通道中束晕-混沌的外部磁场开关参数控制方法. 将该方法应用在多粒子模型中，实现了对5种不同初始分布质子束的束晕-混沌的有效控制，得到了消除束晕及其再生现象的理想结果.在强流加速器系统中，由于外部磁场是可测和可调 的物理量，因此该控制方法有利于实验研究，可为强流质子加速器中周期聚焦磁场的设计和实验提供参考. 关键词： 强流离子束 周期聚焦磁场通道 束晕_混沌 混沌控制 开 关控制     

三维有序二氧化锰大孔材料的模板技术合成及表征

以单分散SiO2 胶态晶体球形成的三维有序结构为模板 ,利用胶体晶模板技术合成了三维长程有序的二氧化锰大孔材料 .通过X射线粉末衍射 (XRD)和扫描电子显微镜 (SEM)对产物进行了表征 .其中XRD数据显示所得产物为纯四方相二氧化锰 .SEM结果表明 ,所合成的二氧化锰大孔材料孔大小均匀 ,空间排列高度有序 ,很好地复制了SiO2 胶态晶体球的自组装方式 .此外 ,对三维有序二氧化锰大孔材料的合成过程进行了分析 ,研究了前体填充次数对产物孔结构的完整性和有序性的影响 ,还发现产物孔径的收缩存在异常现象 .     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

Er3+在二氧化硅介孔分子筛中的高效率发光及其分析

研究了一种新型的负载Er3 的二氧化硅介孔分子筛纳米材料,分析了其在有无功能化试剂全氟甲基磺酰(bis(perfluoromethylsulfonyl)amine)修饰作用下的吸收和荧光光谱特性,获得了高强度的荧光发射.应用Judd-OfelI理论计算了强度参数(Ω2=1.88×10-20,Ω4=5.45×10-20 cm2,Ω6=3.11×1O-20cm2)、跃迁振子强度、自发跃迁概率、能级辐射寿命等重要的光谱参数,讨论了吸收和发射跃迁截面(Ωem=10.9×10-21 cm2),研究了在介孔分子筛纳米材料中的Er3 在不同的抽运功率条件下的荧光强度变化情况.比较了Er3 在不同基质材料中的带宽特性.研究表明二氧化硅介孔分子筛有利于实现高效率的激光输出或具有较宽带宽的高增益光放大,能够成为掺铒激光器或光放大器的新型基质材料.     

持久光谱烧孔动力学的理论模型和实验研究

建立了单光子光化烧孔的三能级模型，求解了反映质子转位变构机制的速率方程组，推导了成孔过程的动力学特性，获得了可与实验进行比较的解析解．用时域和频域两种方法测量了ＴＨＰ／ＰＭＭＡ和ＴＭＰ／ＰＭＭＡ薄膜样品光谱烧孔的动力学过程，得到与理论分析一致的规律，并测得了有效成孔速率和成孔时间等参数．这些参数对于评价频域光存贮材料性能有一定意义．     

基于传输线等效法的双腔体屏蔽系数快速算法

传输线等效法(TLM)是一种常用的开孔腔屏蔽系数快速计算方法,在孔缝耦合系数的计算中考虑了孔缝处的场模式,提高了TLM算法在高频段计算屏蔽系数(SE)的准确性。继而将TLM算法推广到开孔双金属腔屏蔽系数的计算,通过将外腔体中任意位置的电压等效为内孔缝处的辐射电压源,计算得到内腔体中任意位置上的屏蔽系数,解决了已有文献中方法的不足。该算法计算结果与CST仿真结果吻合较好。