一维固-固结构圆柱声子晶体中弹性波的传输特性

利用一维固-固结构圆柱声子晶体中弹性波横向受限的条件,推导出弹性波在其中各个模式满足的关系式,利用它研究了弹性波各模式的特性.并利用转移矩阵研究了弹性波的传输特性随模式量子数和圆柱半径的变化规律.得出了一些一维固-固结构圆柱声子晶体的新特征,即弹性波的传输特性由模式量子数和圆柱半径决定. 关键词： 圆柱声子晶体 弹性波 受限 模式     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

连续螺旋折流板蒸发器壳侧流动换热数值模拟研究

本文对相同几何尺寸的连续螺旋折流板蒸发器与传统弓形折流板蒸发器进行对比性的数值模拟研究,结果表明:在相同壳侧体积流量和折流板数条件下,连续螺旋折流板蒸发器的传热因子和摩擦因子约是弓形折流板的1/3和1/4;当以换热因子和摩擦因子比值评价蒸发器综合性能时,连续螺旋折流板蒸发器比弓形折流板蒸发器提高57%;当最小流通截面流...     

双螺旋与中间搭接螺旋折流板换热器性能研究

采用数值模拟方法研究了40°螺旋角时螺旋折流板换热器双螺旋和中间搭接两种折流板布置形式对壳程性能与螺旋流动的影响,并与30°和40°螺旋角时单螺旋连续搭接结构的进行了对比.结果表明,40°螺旋角时双螺旋和中间搭接结构会强化壳程流体的螺旋流动,使同流量下壳程换热系数与压降增加,但同压降下的换热系数显著下降且均低于30°螺...     

Mechanism for Influence of Nose Bluntness on Asymmetric Vortices

Pressure distributions on slender bodies are measured at various roll angles; it is found that the side loads on the blunted-nose slender body are as small as one-third of that on a pointed-nose one, or even zero at some roll angles. Numerical simulation shows that different flow structures are generated on the leeside of the bodies with different noses. The results confirm that a structure of U-shaped horseshoe vortex develops on the top of the blunted nose due to the closed type of surface flow separation. The shear layer separated from the nose is entrapped into the horseshoe vortex core and forms two mainof this structure is to hold in the two main nose vortices andvortices on the two sides of the body. The function to restrict the emergence of asymmetry.     

Correspondence Between Oscillations and Emitted Photon Closed-Orbits in Spontaneous Emission Rate of an Atom Near a Dielectric Slab

We study the oscillations in the spontaneous emission rate of an atom near a dielectric slab. The emission rate is calculated as a function of system size using quantum electrodynamics. It exhibits multi-periodic oscillations. Four frequencies of the oscillations are extracted by Fourier transforms. They agree with actions of photon closed-orbits going away and returning to the atom. These oscillations are explained as manifestations of quantum interference effects between the emitted photon wave near the atom and the returning photon waves travelling along various closed-orbits.     

Propagation Properties of Gaussian-Shaped and Double-Side Unsymmetrical Metallic Nano-Corrugations

A Gaussian-shaped and double-side unsymmetrical groove structure is presented. Rigorous calculation of the optical properties of the structure is performed on the basis of a multiple multipole program. We analyse the effect of the grating period, the groove width and the film thickness on transmission and reflectance. Simulation results demonstrate that surface-plasmon-polariton resonance positions depend strongly on the structure period and can be changed slightly by the variation of incomplete perforation thickness, while the resonance peak values can be controlled by tuning the groove width. Our results not only give an insight into the physical mechanisms of the double-side unsymmetrical gratings, but also open a way to design novel nano-photonic devices.     

溶胶-凝胶法制备小颗粒(Y,Gd)BO_3∶Eu及其表征

用溶胶 凝胶方法制备了平均粒径为 1～ 2 μm的小颗粒、高发射效率的 (Y ,Gd)BO3 ∶Eu红色发射荧光体。用XRD、SEM、粒度分析和PL光谱对荧光体作了表征和研究。常规固相反应合成 (Y ,Gd)BO3 ∶Eu需在 1 2 0 0℃以上才能形成均一的固溶体。而溶胶 凝胶法制取稀土正硼酸盐 80 0℃灼烧已可形成均一的单相 (Y ,Gd)BO3 ∶Eu,在 1 1 0 0℃可得到发光亮度最高的荧光体。它的亮度是常规固相反应于 1 2 0 0℃制得的荧光体的 1 2 0 %。采用溶胶 凝胶法制取 (Y ,Gd)BO3 ∶Eu荧光体 ,可在相当宽的实验条件范围内得到小粒径、窄分布和高亮度的荧光体 ,且有良好的颗粒形貌。     

RPC读出条的阻抗匹配

文章对高阻板探测器读出条的阻抗匹配问题进行了研究;引入了一个用于计算带状线特性阻抗的经验公式.测量的特性阻抗与经验公式很好地符合,说明这个经验公式可以用于RPC读出条特性阻抗的计算,以改善RPC读出信号的质量,利于RPC探测器性能的测量.     

用电子分析天平测量静电力及真空介电常量

介绍了用电子分析天平测量平行板电容器两极板间的静电力和真空介电常量的原理和方法．