Synthesis,Characterization and Catalytic Activity of Salen Co(Ⅲ)Cl in Alternating Copolymerization of CO2 and Propylene Oxide

The title complex Salen Co(Ⅲ)Cl(Salen = 6,6’-((1E,1’E)-(cyclohexane-1,2-diylbis(azaneylylidene))bis(methaneylylidene))bis(2,4-di-tert-butylphenol)) was synthesized and characterized by elemental analysis, IR spectroscopy, 1H NMR and UV-Vis. The complex can be used as catalyst for the propylene oxide(PO)/CO2 copolymerization in different conditions of reaction time, reaction temperature, carbon dioxide pressure and monomer concentration, and the optimum conditions for copolymerization were obtained.     

A Chinese Lantern-like 2D Cu(Ⅱ) Coordination Polymer Constructed by Bis-imidazole and Dicarboxylate Co-ligands: Synthesis,Crystal Structure and Photocatalytic Activity

A new Cu(II) coordination polymer, {[Cu(1,3-BIP)(TFBDC)]·DMF}n(1,1,3-BIP is a 1,3-bis(imidazole)propane, and H2TFBDC is 2,3,5,6-tetrafluoroterephthalic acid) was prepared under solvothermal conditions and characterized by single-crystal and powder X-ray diffraction, IR spectra, thermogravimetric analyses and elemental analyses. The single-crystal X-ray diffraction reveals that metal coordination polymer 1(MCP 1) shows a two-dimensional sheet layer structure, which is further reinforced through strong intermolecular hydrogen bonding to form a 3 D supramolecular framework. Furthermore, the photocatalytic experiment result indicates the degradation ratios of methyl orange(MO) reach 83.4% within 180 minutes when MCP 1 acts as catalyst.     

Bio-based and Biodegradable Electrospun Fibers Composed of Poly(L-lactide) and Polyamide 4

Novel bio-based and biodegradable block copolymers were synthesized by "click" reaction between poly(L-lactide)(PLLA) and polyamide 4(PA4). Upon tuning the molar mass of PLLA block, the properties of copolymers and electrospun ultrafine fibers were investigated and compared with those of PLLA and PA4 blends. PLLA and PA4 were found incompatible and formed individual crystalline regions, along with reciprocal inhibition in crystallization. Electrospun fibers were highly hydrophobic, even if hydrophilic PA4 was the rich component. The crystallinity of either PLLA or PA4 decreased after electrospinning and PLLA-rich as-spun fibers were almost amorphous. Immersion tests proved that fibers of block copolymers were relatively homogeneous with micro-phase separation between PLLA and PA4. The fibrous structures of copolymers were different from those of the fibers electrospun from blends, for which sheath-core structure induced by macro-phase separation between homopolymers of PLLA and PA4 was confirmed by TEM, EDS, and XPS.     

The Crystallization and Melting Behaviors of PDLA-b-PBS-b-PDLA Tri-block Copolymers

In this study,the poly(D-lactide)-block-poly(butylene succinate)-block-poly(D-lactide)(PDLA-b-PBS-b-PDLA)triblock copolymers with a fixed length of PBS and various lengths of PDLA are synthesized,and the crystallization behaviors of the PDLA and PBS blocks are investigated.Although both the crystallization behaviors of PBS and PDLA blocks depend on composition,they exhibit different variations.For the PDLA block,its crystallization behaviors are mainly influenced by temperature and block length.The crystallization signals of PDLA block appear in the B-D 2-2 specimen,and these signals get enhanced with PDLA block length.The crystallization rates tend to decrease with increasing PDLA block lendth during crystallizing at 90 and 100°C.Crystallizing at higher temperature,the crystallization rates increase at first and then decrease with block length.The crystallization rates decrease as elevating the crystallization temperature.The melting temperatures of PDLA blocks increase with block lengths and crystallization temperatures.For the PBS block,its crystallization behaviors are mainly controlled by the nucleation and confinement from PDLA block.The crystallization and melting enthalpies as well as the crystallization and melting temperatures of PBS block reduce as a longer PDLA block has been copolymerized,while the crystallization rates of the PBS block exhibit unique component dependence,and the highest rate is observed in the B-D 2-2 specimen.The Avrami exponent of PBS crystallites is reduced as a longer PDLA block is incorporated or the sample is crystallized at higher temperature.This investigation provides a convenient route to tune the crystallization behavior of PBS and PLA.     

Competition between Liquid-liquid De-mixing,Crystallization, and Glass Transition in Solutions of PLA of Different Stereochemistry and DEET

Liquid-liquid(L-L)de-mixing and vitrification of solutions of either crystallizable poly(L-lactic acid)(PLLA)or non-crystallizable poly(D/L-lactic acid)(PDLLA)with 50 m%N,N-diethyl-3-methylbenzamide(DEET)were analyzed by calorimetry and cloud-point measurements,which allows drawing conclusions about the effect of polymer stereochemistry on the phase behavior.Regardless of the PLA stereochemistry,vitrification of the solutions on fast cooling,hindering crystallization of PLLA,occurred below-20℃ and suppressed prior L-L de-mixing.The experimental results prove that crystallization in samples containing crystallizable PLLA,observed at around 55℃ on slow cooling,is not preceded by L-L de-mixing.     

绿色单体二氧化碳参与的新型聚合反应

二氧化碳（CO₂）是一种丰富、廉价、无毒以及可再生的一碳资源,也是一种可用于聚合的绿色单体.基于CO₂的聚合是近年来的研究热点之一.目前广泛报道的是CO₂和环氧单体的聚合反应,经过几十年的发展已经成功实现工业化生产.最近几年,一些CO₂参与的新型聚合反应被陆续报道,这些工作大都通过两种途径实现从CO₂到高分子材料的转变.第一个途径是先将CO₂转化为可以聚合的单体,例如：内酯、环状碳酸酯和2,5-二呋喃甲酸等,再利用开环或者逐步聚合将单体转化为聚合物;另一个途径是直接以CO₂为单体和其他类型单体共聚得到聚合物.这两种途径对于发展CO₂参与的新型聚合反应,拓展CO₂基聚合物种类都具有重要意义.本综述按照CO₂直接还是间接参与聚合反应分类总结了近年来在CO₂制备高分子材料方面的进展,并对未来发展方向进行了简单阐述.     

过渡金属催化有机腈和叠氮酸钠反应机理的研究

过渡金属催化有机腈和叠氮酸钠反应机理的研究一直是一个具有挑战性的课题.本工作组合理论和实验方法,对其反应机理作了深入的探讨.基于对两种类型中间体（H₂O）₃M…N₃^-和（H₂O）₃M…NCCH₃稳定性的理论分析和中间体Cd₂（μ₃-N₃）（μ₃-OH）（μ₅-CHDA）（1）和Cd（μ₂-N₃）（μ₃-IBA）（2）（H₂CHDA为1,3-环己二酸,HIBA为4'-（咪唑-1-基）苯甲酸）的成功捕获,首次从实验和理论上揭示了过渡金属离子在反应中起活化叠氮酸根的作用.此外,基于中间体（H₂O）₃M… N₃^-和乙腈分子的静电势盆分析的结果,揭示了叠氮酸根未配位的端基N原子可以进攻氰基N原子发生加成反应,随后可能发生环加成反应生成四唑,在水分子的辅助下,其加成物也可能发生类似于里特反应生成全氮阴离子.该项研究把过渡金属催化有机腈和叠氮酸钠反应引入全氮阴离子合成的新领域.     

不同色浆质量分数的水性聚氨酯涂料对聚氯乙烯表皮低温爆破性能的影响

本文制备了一系列不同色浆质量分数的水性聚氨酯涂料,并将其喷涂在汽车仪表板聚氯乙烯(PVC)表皮的背面形成复合材料。 用旋转流变仪表征了涂料的粘度以评价其喷涂性能;用差示扫描量热仪表征了材料的玻璃化转变温度(T_g);利用万能材料试验机表征了材料在-30 ℃条件下的拉伸性能及抗撕裂性能;用动态热机械分析仪表征了材料的损耗比随温度的变化。 结果表明:不同色浆质量分数的涂料都能喷涂,含有涂层材料PVC表皮在-30 ℃低温爆破性能与涂层材料的T_g、低温拉伸性能、抗撕裂性能的关系并不大,而与涂层材料的阻尼性能直接相关。 材料的阻尼性能越好,其低温爆破性能越好。     

MALDI质谱技术在酶活性分析中的应用

酶作为生物催化剂参与很多重要的生理过程,同时也是一类重要的生物分子。酶的活性分析对于疾病诊断和治疗具有重要意义。基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)具有操作简单、分析速度快、灵敏度高和易于实现高通量分析的特点,已被广泛用于各种组学研究和生物分子的检测,在酶的检测和活性分析中亦发挥了重要作用。该文综述了国内外利用MALDI-TOF MS分析酶活性和进行药物筛选的策略,总结了各种方法的优缺点,提出了MALDI质谱技术在酶活性分析领域存在的问题和挑战,并对其发展前景进行了展望。     

新型表面辅助激光解吸附/离子化质谱基质及其在生物检测中的应用

表面辅助激光解吸附/离子化质谱(Surface-assisted laser desorption/ionization mass spectrometry,SALDI-MS)是一种利用无机纳米粒子或纳米结构表面作为基质,辅助待测分子的解吸附和离子化的质谱技术。由于其具有灵敏度高、耐盐性好、操作简便、重现性好、检测通量高等优势,已经被广泛应用于食品安全、环境监测、生命科学等诸多领域。该文总结了近5年来,SALDI基质材料(金属及金属氧化物材料、碳材料、硅材料、金属有机骨架化合物材料等)的最新研究进展及其在生物检测领域中的应用,并对SALDI-MS基质材料的发展及应用进行了展望。