杂双子咪唑表面活性剂的合成及其表面性能

合成了一系列以两个亚甲基为联接基的杂双子咪唑表面活性剂([C_m-2-C_nim]Br_{2, m, n}=8, 10, 12, 14, 16; m≠n). 用氢谱和质谱对其结构进行了表征. 探索了物料比、反应温度和时间对反应产率的影响. 对合成的杂双子咪唑表面活性剂的表面活性进行了研究,讨论了分子结构的不对称程度对表面活性的影响.     

基于绳索作动器的大型太空望远镜桁架结构的振动主动控制

薄膜衍射是一种新型的太空望远镜的成像方式,它具有轻质、易折叠与展开、光学成像精度高等许多优点,是当今太空望远镜技术的研究热点.该文针对一类薄膜衍射太空望远镜桁架结构的振动主动控制进行了研究,提出了一种基于绳索作动器的振动主动控制策略.首先建立了望远镜桁架结构的动力学模型,然后采用粒子群优化算法研究了绳索作动器的优化布置...     

Design and optimization of with low weakly-coupled few-mode fiber nonlinearity

By investigating the influence of the difference of refractive index between core and cladding （nco - ncl）, normalized frequency （V） and core radius （α） on both the intramodal and intermodal nonlinear coefficients （NCs） respectively, we design a novel weakly-coupled four-mode fiber with low nonlinearity. In general, under the premise of ensuring the low NCs between two non-degenerate modes, this design can reduce the intermodal NCs （〈 0.5 W-l·km^-1） between two degenerate modes and optimizes the parameters of differential group delays （DGDs） and chromatic dispersion. The optimized few mode fiber （FMF） is eligible for transmission and mode de-multiplexing in the receiver.     

An adiabatic quantum optimization for exact cover 3 problem

A perturbation method is applied to study the structure of the ground state of the adiabatic quantum optimization for the exact cover 3 problem. It is found that the instantaneous ground state near the end of the evolution is mainly composed of the eigenstates of the problem Hamiltonian, which are Hamming close to the solution state. And the instantaneous ground state immediately after the starting is mainly formed of low energy eigenstates of the problem Hamiltonian. These results are then applied to estimate the minimum gap for a special case.     

Design optimization of highly efficient spectrum-splitting and beam-concentrating diffractive optical element for lateral multijunction solar cells

Two improved algorithms are proposed to extend a diffractive optical element （DOE） to work under the broad spec- trum of sunlight. An optimum design has been found for the DOE, with a weighted average optical efficiency of about 6.8% better than that of the previous design. The optimization of designing high optical efficiency DOEs will pave the way for future designs of high-efficiency, low-cost lateral multijunction solar cells based on such a DOE.     

Optimization and numerical simulation for the extraction system of the H- multicusp ion source

A new ion source has been designed and manufactured for the CYCLONE30 accelerator, which has a much advanced performance compared with the original. It is expected that the newly designed ion source extraction system will transport a very large percentage of the beam without deteriorating the beam optics, which is designed to deliver an H- beam at 30 keV. The accelerator assembly consists of three circular aperture electrodes made of copper. The simulation study was focused on finding parameter sets that raise the beam perveance as large as possible and which reduce the beam divergence as low as possible. Ion beams of the highest quality are extracted whenever the half-angular divergence is minimum, for which the perveance current intensity and the extraction gap have optimum values. The triode extraction system is designed and optimized by using CST software （for Particle Beam Simulations）. The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that it is possible to achieve this goal by decreasing the thickness of the plasma electrode, shortening the first gap, and adjusting the acceleration electrode voltage.     

Neutron beam optimization based on a ^7Li（p,n）^7Be reaction for treatment of deep-seated brain tumors by BNCT

Neutron beam optimization for accelerator-based Boron Neutron Capture Therapy（BNCT） is investigated using a ^7Li（p,n）^7Be reaction. Design and optimization have been carried out for the target, cooling system,moderator, filter, reflector, and collimator to achieve a high flux of epithermal neutron and satisfy the IAEA criteria.Also, the performance of the designed beam in tissue is assessed by using a simulated Snyder head phantom. The results show that the optimization of the collimator and reflector is critical to finding the best neutron beam based on the ^7Li（p,n）^7Be reaction. Our designed beam has 2.49×109n/cm^2 s epithermal neutron flux and is suitable for BNCT of deep-seated brain tumors.     

复间冷机组高温时段汽轮机排汽真空优化管理

本文基于复合制冷循环间接空冷(复间冷)系统的结构组成和传热过程,定性分析了环境气温对干、湿冷机组排汽真空影响机理的异同,确定了复间冷机组汽轮机排汽真空的影响因素,建立复间冷机组高温时段变工况特性下排汽真空计算模型,并以最佳真空为目标,给出运行工况复间冷机组高温时段最佳真空的计算方法。以600 MW虚拟复间冷机组参数为基准,通过分析计算,揭示了复间冷机组高温时段最佳真空变化规律以及压缩机的相应运行特性,所得结果可为高温时段复间冷系统设计和运行优化提供可靠理论依据。     

基于水平集方法的二维Stokes多工况流动的拓扑优化

本文采用水平集方法进行了多工况条件下Stokes流动问题的拓扑优化,研究了进出口边界变化对流体拓扑优化结果的影响。在拓扑优化过程中,采用无需样条参数化的重新网格划分方法来实现物理场和水平集类方程交替求解。以最小能量耗散为目标,通过对三工况条件下流动通道的拓扑优化设计,表明多工况条件下的流动拓扑优化比单工况条件下获得的拓扑优化设计结果更为合理。