Modified Photoluminescence by Silicon-Based One-Dimensional Photonic Crystal Microcavities

photoluminescence (PL) lrom one-dimensional photonic band structures is investigated. The doped photonic crystal with microcavitles are fabricated by using alternating hydrogenated amorphous silicon nitride (a-SiNx:H/a-SiNy:H) layers in a plasma enhanced chemical vapour deposition (PECVD) chamber. It is observed that microcavities strongly modify the PL spectra from active hydrogenated amorphous silicon nitride (a-SiNx:H) thin film. By comparison, the wide emission band width 208nm is strongly narrowed to 11 nm, and the resonant enhancement of the peak PL intensity is about two orders of magnitude with respect to the emission of the λ/2-thick layer of a-SiNx:H. A linewidth of Δλ=11 nm and a quality factor of Q=69 are achieved in our one-dimensional a-SiNz photonic crystal microcavities. Measurements of transmittance spectra of the as-grown samples show that the transmittance resonant peak of a cavity mode at 710nm is introduced into the band gap of one-dimensional photonic crystal distributed Bragg reflector (DBR), which further verifies the microcavity effects.     

一种硅基SiO2波导耦合器的设计与分析

波导耦合器是组成光纤传感系统和光纤通信系统光收发组件及模块的重要元器件,是实现光收发模块一体化光电集成的基础。给出了一种用光纤陀螺系统的X型四端口波导耦合器的工作原理,采用有效折射率法和BPM(Beam propagation method)法建立了耦合器的数学模型,计算并分析了耦合器尺寸在尽可能小的情况下和在满足单模传输的条件下耦合器的耦合系数、有效耦合长度、分光比以及回波损耗等参数之间的关系,并对其关键技术进行了系统的研究。仿真结果表明,所设计的波导耦合器在低损耗情况下分光比可达到50%∶50%,耦合器全长为33.5mm,输入输出波导间距为410μm,芯层截面积为6μm×6μm。     

改进的基于主成分分析的三维人脸形状建模

针对基于主成分分析(PCA)的三维(3D)人脸形状重构不精确的缺点,对位移向量、缩放因子、旋转矩阵、重构系数等参数进行了精确的定义和计算,并对重构模型进行了有效的调整。根据CVL Face Database建立了113个3D人脸形状模型,经迭代运算后重构出了由特征点组成的稀疏3D人脸形状模型。利用径向基函数(RBF)得到了密集3D人脸形状模型。试验结果表明,算法可以得到精确的重构模型,对深度旋转的人脸图像和特征点定位误差也有很好的鲁棒性。     

Improved Ligand-Field Theoretical Calculations of R-Line Thermal Broadenings of NIgO：Cr^3＋ and MgO：V^2＋

With the values of parameters obtained from improved ligand-field theory, by taking into account all the irreducible representations and their components in EPI as well as all the levels and the admixtures of basic wavefunctions within d^3 electronic configuration, the R-line thermal broadenings （TB） of both MgO：Cr^3＋ and MgO：V^2＋ have microscopic-theoretically been calculated, The results are in very good agreement with the experimental data. It is found that the R-line TB of MgO：Cr^3＋ or MgO：V^2＋ comes from the first-order term of EPI. The elastic Raman scattering of acoustic phonons plays a dominant role in R-line TB of MgO：Cr^3＋ or MgO：V^2＋.     

红外光谱预处理中去噪的研究

红外(IR)光谱由于包含了噪声等各种外界干扰因素.应该先进行光谱预处理,以便降噪,提高分析准确度.本文采用了一种基于最优小波包基的信号去噪算法,该算法根据最小代价原理,采用不同的阈值算法对光谱的高频和低频信号进行量化处理,用量化后的系数重构得到去噪信号,从而达到较好的去噪效果.实验表明,本方法处理后光谱曲线非常光滑、噪声消除效果明显.     

ICP-AES测定镍基焊料中的磷

通过酸溶解试验、基体共存元素干扰实验等,建立了ICP-AES测定镍基焊料中高含量磷的分析方法.样品加标回收率为100.5%-101.0%,相对标准偏差小于0.80%.该方法简便、快速、准确可靠.     

二(2-乙基己基)磷酸稀土配合物的红外和拉曼光谱

用稀土氯化物与二(2-乙基己基)磷酸反应制备了14种标题配合物,测定了配合物的红外和拉曼光谱,对其主要红外和拉曼谱带进行了归属.结果表明,Ln(DEHP)3应具有与Sm(DMP)3和Pr(DMP)3相同的配位形式和结构类型,每个稀土离子通过双O-P-O桥与邻近的三个稀土离子相连接,形成"双桥二十四元环"的多聚网络结构.Ln-O键基本上是离子键.     

掩埋式多模干涉型分束器的反射性能

通过束传播方法(BPM)模拟了SiO2基掩埋式波导结构多模干涉(MMI)型分束器的反射性能,模拟结果表明,MMI工作在分束模式时存在最优的多模干涉长度实现最大输出和最小反射,而在合束模式下实现最大输出时反射也达到最大,这是由自映象原理决定的。SiO2基掩埋式波导结构MMI分束器对反射具有良好的抑制作用,其最大反射功率为-60dB。分析表明,多模干涉区末端的界面反射率决定了器件的反射强弱,SiO2基掩埋式波导的界面反射率非常低,这是其低反射的原因。     

Synchronization of different chaotic systems via active radial basis functions sliding mode controller

This paper presents a new method to synchronize different chaotic systems with disturbances via an active radial basis function （RBF） sliding controller. This method incorporates the advantages of active control, neural network and sliding mode control. The main part of the controller is given based on the output of the RBF neural networks and the weights of these single layer networks are tuned on-line based on the sliding mode reaching law. Only several radial basis functions are required for this controller which takes the sliding mode variable as the only input. The proposed controller can make the synchronization error converge to zero quickly and can overcome external disturbances. Analysis of the stability for the controller is carried out based on the Lyapunov stability theorem. Finally, five examples are given to illustrate the robustness and effectiveness of the proposed synchronization control strategy.     

FeSe基超导单晶与薄膜研究新进展:自旋向列序、电子相分离及高临界参数

FeSe基超导体的超导临界温度可大范围调控,物理现象丰富,是非常规超导机理研究的热点.由于较高的超导临界参数及易于加工等特点,FeSe基超导体在超导应用开发方面也日益受到重视.大尺寸高质量的单晶和薄膜形态的FeSe基超导材料,对于相关基础科学研究和应用开发都极为重要.作者近年来先后开发和发明了水热离子交换（ion-exchange）、离子脱插（ion-deintercalation）、基底辅助水热外延生长方法,成功解决了二元FeSe和插层（Li,Fe）OHFeSe超导体高质量单晶和薄膜的生长和物性调控难题.进而在相关物理问题的研究中取得新进展,包括发现二元FeSe中自旋向列序与超导电性密切相关,观测到（Li,Fe）OHFeSe中的电子相分离现象.此外,（Li,Fe）OHFeSe超导薄膜呈现很高的超导临界电流密度和上临界磁场,其应用前景值得关注.