基于可见光-红外模态下双向特征生成的行人重识别方法

为了提高可见光-红外跨模态行人重识别的检测准确度,提出一种基于可见光-红外模态双向特征生成的双流网络模型,相对现有算法,使用双向特征生成方法进行跨模态行人特征迁移,显著提高了跨模态特征表达,同时利用双流网络提取具有判别性双模态特征,并通过设计的粗细粒度损失融合的策略,提高了跨模态行人检索的准确度。实验结果表明,与最新方法相比,文章提出的方法提高了跨模态行人重识别的平均准确度,在RegDB数据集上取得92.91%,在SYSU-MM01数据集取得66.17%。     

基于空洞循环卷积的近红外图像彩色化方法

针对近红外图像彩色化过程中存在近红外与可见光图像间模态差异较大、图像域样式不佳而导致其彩色化结果出现色彩纹理不吻合的问题,提出一种基于空洞循环卷积的近红外图像彩色化方法。改进CycleGAN网络,利用级联结构和空洞卷积块的优势设计了一种名为空洞级联模块,该模块采用编解码级联结构,代替原模型残差网络中的单向连接结构,进行特征通道的级联。在编解码级联层中引入空洞卷积模块,利用空洞卷积不损失图像纹理细节的优势,进一步提取不同尺度的近红外图像特征信息,最后通过解码将近红外灰度图像上色成彩色近红外图像。算法在生成网络中采用空洞级联方式改善误着色问题;在判别网络中引用感知损失函数改善网络收敛速度慢的问题。并且在NIR＿VIS数据集上开展验证和分析。实验结果表明,所提方法提升效果明显,更好地保持了原目标的结构及色彩纹理特征,有效地提升了近红外图像的可视化效果。     

工业热过程中无意产生的持久性有机污染物生成机理

持久性有机污染物(persistent organic pollutants,POPs)可在工业热过程中无意生成和被排放,而探究其生成机理是发展源头减排技术的基础.本文在梳理文献的基础上,发现二(噁)英的生成理论有了一些新的突破.关于氯酚和氯苯等前驱体在热过程中生成自由基中间体的研究,能够从分子层面上揭示二(噁)英的生...     

Formation of Ultrafine Apatite Fibers by Sol-gel/Electrospinning

Ultrafine apatite fibers were prepared by electrospinning of sol-gel precursor/poly（ vinyl pyrrolidone） （PVP） solutions followed by subsequent calcination. The as-electrospun and calcinated fibers were observed under a scanning electron microscope and an optical polarizing microscope. Results show that the morphology and the diameter of as-electrospun fibers strongly depend on the viscosity and the surface tension of sol-gel precursor/PVP solutions. After calcination, the smooth as-electrospun fibers shrink and the fiber diameter decreases because of the removal of the polymer. The chemical evolution upon the transformation of the precursor from a gel to the final apatite fibers was investigated by thermogravimetric-differenfial thermal analysis, X-ray diffraction, and Fourier transform infrared spectroscopy. It is thus suggested that the crystalline structure of the calcined fibers is largely influenced by the calcination temperature. After being calcined at 600 ℃, the apatite fibers with a diameter of about 280 nm containing β-tricalcium phosphate were obtained.     

完全分配格上拓扑生成序的加细及其性质

在文[1]中,作者建立了完全分配格上的共生结构的一般理论,研究了余拓扑,拟一致和T结构的一致化结构。本文引进了完全分配格L上半拓扑生成序加细的概念,研究了其性质,得到了一系列重要的结论,为进一步研究完全分配格上拓扑共生结构的加细奠定了基础。     

苯-氯苯二元系的折射分析

研究了液体二元系的折射分析法。发现苯-氯苯的折射率和组成间有良好的线性关系。得出了线性方程。利用方程测得的结果和实际值十分吻合。     

Stability of <Emphasis Type="Italic">C</Emphasis>-regularized Semigroups

Let T = (T(t))t≥0 be a bounded C-regularized semigroup generated by A on a Banach space X and R(C) be dense in X. We show that if there is a dense subspace Y of X such that for every x ∈ Y, σu(A, Cx), the set of all points λ ∈ iR to which (λ - A)^-1 Cx can not be extended holomorphically, is at most countable and σr(A) N iR = Ф, then T is stable. A stability result for the case of R(C) being non-dense is also given. Our results generalize the work on the stability of strongly continuous senfigroups.     

Entropy Production and Admissibility of Shocks

In shock wave theory there are two considerations in selecting the physically relevant shock waves.There is the admissibility criterion for the well-posedness of hyperbolic conservation laws.Another consideraztion concerns the entropy production across the shochs.The latter is natural from the physical point of view,but is not sufficient in its straightforward formulation,if the system is not genuinely nonlinear.In this paper we propose the principles of increasing entropy production and that of the superposition of shocks.These principles arc shown to be equivalent to the admissibility criterion.     

二次风率对分级进风燃烧室内湍流燃烧与NOx生成的影响

本文在分级进风燃烧室的热态实验装置上,测量了燃烧室内湍流燃烧的温度场和组分浓度场,研究了分级进风的流量比率即二次风率对燃烧及NOx生成的影响.得到了四组不同二次风率下燃烧室内气体温度和O2、CO2、CO与NO浓度的分布.