Superfluidity and Anderson localisation for a weakly interacting Bose gas in a quasiperiodic potential

Using exact diagonalisation and Density Matrix Renormalisation group (DMRG) approach we analyse the transition to a localised state of a weakly interacting quasi-1D Bose gas subjected to a quasiperiodic potential. The analysis is performed by calculating the superfluid fraction, density profile, momentum distribution and visibility for different periodicities of the second lattice and in the presence (or not) of a weak repulsive interaction. It is shown that the transition is sharper towards the maximally incommensurate ratio between the two lattice periodicities, and shifted to higher values of the second lattice strength by weak repulsive interactions. We also relate our results to recent experiments.     

A terabit capacity passive polymer optical backplane based on a novel meshed waveguide architecture

An optical backplane based on a meshed polymer waveguide architecture enabling high-speed board-to-board optical interconnection is presented. This planar array of multimode polymer waveguides can provide passive strictly non-blocking links between server line cards fitted with optical transmitter and receiver arrays. This architecture offers a scalable and low-cost solution to the bandwidth limitations faced by electrical backplanes and is suitable for PCB integration. The reported backplane demonstrator uses a matrix of 100 waveguides each capable of 10 Gb/s operation to interconnect 10 cards for a total capacity of a terabit per second aggregate data rate in multicast mode. Characterisation of the backplane demonstrator reveals low link losses of 2 to 8 dB for a multimode fibre input and crosstalk values below −35 dB. Error free data transmission at 10 Gb/s is achieved with a power penalty of only 0.2 dB at a bit-error-rate of 10⁻⁹. Additionally, lossless operation of a Gigabit Ethernet link over the backplane is achieved even when using the worst-case highest loss links.     

High-efficiency,high-speed VCSELs for optical interconnects

High-efficiency, high-speed, tapered-oxide-apertured vertical-cavity surface-emitting lasers (VCSELs) emitting at 980 nm have been demonstrated. By carefully engineering the tapered oxide aperture, the mode volume can be greatly reduced without adding much optical scattering loss for the device sizes of interest. Consequently, these devices can achieve higher bandwidth at lower current and power dissipation. In addition, the parasitics are reduced by implementing deep oxidation layers and an improved p-doping scheme in the top mirror. Our devices show modulation bandwidth exceeding 20 GHz, a record for 980 nm VCSELs. Moreover, 35 Gb/s operation has been achieved at only 10 mW power dissipation. This corresponds to a data-rate/power-dissipation ratio of 3.5 Gbps/mW. Most importantly, our device structure is compatible with existing manufacturing processes and can be easily manufactured in large volume making them attractive for optical interconnects.     

Preparation of phosphors AEu(MoO4)2 (A?=?Li, Na, K and Ag) by?sol-gel method

A series of double molybdates phosphors AEu(MoO₄)₂ (A = Li, Na, K and Ag) have been prepared by sol-gel method. Their crystal structure and luminescent properties have also been investigated in a comparable way. The crystallization processes of the phosphor precursors were characterized by X-ray diffraction (XRD) and thermogravimetry-differential thermal analysis (TG-DTA). Field emission scanning electron microscopy (FE-SEM) was also used to characterize the shape and size distribution of the phosphors. Samples except KEu(MoO₄)₂ showed tetragonal scheelite structure in the range of our experiments, and no phase transition appeared. Phosphor KEu(MoO₄)₂ possessed two structures, and the phase transition took place at about 800°C. All samples with high purity could be obtained at about 500°C for 5 hours, and they all showed intense red light peaked at 616 nm originated from ⁵D₀→⁷F₂ emission of Eu³⁺ under the excitation of 465 nm or 394 nm light. The excitation spectra of phosphors AEu(MoO₄)₂ (A = Li, Na, and K) are composed of a strong broad charge transfer (CT) band and some sharp lines, and the relative intensity of CT band, the two strongest absorption lines at 395 nm and 465 nm are comparative, so these three phosphors are good red phosphor candidates for violet or blue LEDs. For the excitation spectrum of phosphor AgEu(MoO₄)₂, intensities of CT band and the absorption line at 395 nm are much weaker than that of line at 465 nm, thus phosphor AgEu(MoO₄)₂ is only suit for GaN-based blue LED.     

Ferroelectric and dielectric properties of SrBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> thin films grown on Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> film layer

Ferroelectric and dielectric properties of bilayered ferroelectric thin films, SrBi₄Ti₄O₁₅ grown on Bi₄Ti₃O₁₂, were investigated. The thin films were annealed at 700°C under oxygen atmosphere. The bilayered thin films were prepared on a Pt(111)/Ti/SiO₂/Si substrate by a chemical solution deposition method. The dielectric constant and dielectric loss of the bilayered thin films were 645 and 0.09, respectively, at 100 kHz. The value of remnant polarization (2P _r) measured from the ferroelectric thin film capacitors was 60.5 μC/cm² at electric field of 200 kV/cm. The remnant polarization was reduced by 22% of the initial value after 10¹⁰ switching cycles. The results showed that the ferroelectric and dielectric properties of the SrBi₄Ti₄O₁₅ on Bi₄Ti₃O₁₂ ferroelectric thin films were better than those of the SrBi₄Ti₄O₁₅ grown on a Pt-coated Si substrate suggesting that the improved properties may be due to the different nucleation and growth kinetics of SrBi₄Ti₄O₁₅ on the c-axis-oriented Bi₄Ti₃O₁₂ layer or on the Pt-coated Si substrate.     

Effects of hydroxyls on the structural and room temperature ferromagnetic properties of Co doped SnO2 nanoparticles

Co doped SnO₂ nanoparticles have been prepared via a wet chemical method with different precipitation processes. The structure and morphology of Co doped SnO₂ nanoparticles demonstrate that the nanoparticles are in a rutile single phase and uniform, respectively. X-ray photoelectron spectroscopy shows that the Co dopants are in 2+ oxidation valence state and doped ∼2 atm% in SnO₂ nanoparticles. Moreover, Raman spectroscopy further confirms that Co doped SnO₂ nanoparticles have single phase crystallinity without forming any extra modes related to secondary phases. The magnetic measurements reveal that all nanoparticles exhibit room temperature ferromagnetism (RTFM) due to the presence of disorders and defects introduced by hydroxyls in the crystal structure. In addition, it has been clearly observed that the saturated magnetic moments are strongly affected by the precipitation processes which control the incorporation of hydroxyls into the lattice.     

Study of plasma parameter’s distribution upon electrical wire explosion

Experimental results on electrical explosion of wires in vacuum with current density  A/m², current rise rate (dI/dt) ~ 50 A/ns and current pulse with amplitude ∼10 kA are presented. The structure of the discharge channels in vacuum has been studied using laser shadow and schlieren imaging with 7 ns frames, UV pinhole images with 5 ns frames and X pinch X-ray backlighting. The information on the dense core material and the conducting plasma distributions was obtained in our experiments by analyzing and comparing the results obtained from all diagnostics.     

Optically-induced defect states in photonic lattices: formation of?defect channels, directional couplers, and disordered lattices leading to Anderson-like light localization

Formation of defect states by optical induction in one-dimensional photonic lattices fabricated in photorefractive lithium niobate is investigated experimentally. First, by using a moving narrow laser beam for defect recording, we investigate light propagation in samples containing single line defects and adjacent channel defects forming directional couplers. Then, these results are used to create lattices with randomly distributed defects, resembling a disordered optical potential. In such lattices, wave propagation is found to change from ballistic transport to transverse Anderson-like light localization as a function of induced disorder.     

Influence of the illumination on the subband structure and?occupation in AlxGa1?xN/GaN heterostructures

The subband structure and occupation in the triangular quantum well at Al _x Ga_1−x N/GaN heterointerfaces have been investigated by means of temperature dependent Shubnikov–de Haas (SdH) measurements at low temperatures and high magnetic fields under illumination. After the illumination of the heterostructures, the total two-dimensional electron gas concentration increases, and the SdH oscillation amplitudes are enhanced when there is no additional subband occupation. It is also found that the energy separation between the subbands decreases after the illumination. We suggest that the illumination decreases the electric field and thus weakens the quantum confinement of the triangular quantum well at Al _x Ga_1−x N/GaN heterointerfaces. The GaN layer is thought to be the primary contributor of the excited electrons by the illumination.     

Noise effects in two different biological systems

We investigate the role of the colored noise in two biological systems: (i) adults of Nezara viridula (L.) (Heteroptera: Pentatomidae), and (ii) polymer translocation. In the first system we analyze, by directionality tests, the response of N. viridula individuals to subthreshold signals plus noise in their mating behaviour. The percentage of insects that react to the subthreshold signal shows a nonmonotonic behaviour, characterized by the presence of a maximum, as a function of the noise intensity. This is the signature of the non-dynamical stochastic resonance phenomenon. By using a “soft” threshold model we find that the maximum of the input-output cross correlation occurs in the same range of noise intensity values for which the behavioural activation of the insects has a maximum. Moreover this maximum value is lowered and shifted towards higher noise intensities, compared to the case of white noise. In the second biological system the noise driven translocation of short polymers in crowded solutions is analyzed. An improved version of the Rouse model for a flexible polymer is adopted to mimic the molecular dynamics by taking into account both the interactions between adjacent monomers and the effects of a Lennard-Jones potential between all beads. The polymer dynamics is simulated in a two-dimensional domain by numerically solving the Langevin equations of motion in the presence of thermal fluctuations and a colored noise source. At low temperatures or for strong colored noise intensities the translocation process of the polymer chain is delayed. At low noise intensity, as the polymer length increases, we find a nonmonotonic behaviour for the mean first translocation time of the polymer centre of inertia. We show how colored noise influences the motion of short polymers, by inducing two different regimes of translocation in the dynamics of molecule transport.