利用差异衍生同步分析醛糖和酮糖

建立了一种可同时对醛、酮糖进行精确定性和定量分析的方法。以肌醇作为内标，用80％乙醇超声提取，利用醋酸酐和HMDS＋TMCS（1：3）进行差异衍生，在EI源下用SIM模式进行GC／MS分析。结果表明：11种标准单糖在1—4mg／L范围内线性良好；仪器检出限：醛糖在8．15—22．4μg／L之间；酮糖为2．32μg／L和3．47μg/L；高、中、低3个量的平均回收率在73．0％-95．7％，相对标准偏差在3．1％-10．0％。对枸杞游离单糖进行测定，各单糖含量分别在0．26—368．6mg／g。该方法弥补了以前单糖分析中的缺陷，对既含有醛糖又含有酮糖的样品可同时进行精确的定性定量分析。     

Theoretical investigation of 1,4-dioxane complexes with water in the <Emphasis Type="Italic">chair</Emphasis> conformation by semiempiric MNDO/PM3 method

The structure and relative stability of 1,4-dioxane-water, (Diox)_n·(H₂O )_m (n = 1, 2, m = 1–6), molecular complexes have been calculated by semiempirical MNDO/PM3 method. A considerable variety of (Diox)_n·(H₂O )_m isomeric structures was stated. The mean energy of O_Diox…H_W-O_W hydrogen bond in (Diox)_n·(H₂O)_m complexes formed by 1,4-dioxane molecules in the chair conformation amounts to ?2.293 ± 0.210 kcal/mol with the average bond length 2.797 0.015 Å.     

DFT investigation of sites of protonation of antitumor of 2‐(4‐aminophenyl)benzazoles in the gas phase and in solution

The proton affinity on each of the possible sites in the antitumor 2‐(4‐aminophenyl)benzazoles has been calculated at the B3LYP/6‐311G** level of theory in the gas phase and in solution. The N₃‐site of protonation is found to be strongly favored over the NH₂‐site for the studied compounds both in gas phase and in solution. The stability of N₃‐protonated species is explained by the resonance interaction of the NH₂‐group with the heterocyclic ring. The potential energy surface (PES) for the protonation process was studied at the density functional theory (DFT)/B3LYP/6‐311++G** level of theory. Solvent effects on the PES were also examined using two models: Onsager self‐consistent field and polarizable continuum model (PCM). © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Phenol methylation over CrPO4 and CrPO4?AlPO4 catalysts

The vapor-phase catalytic alkylation of phenol with methanol and dimethyl carbonate on a series of differently prepared CrPO₄ (Cr/P=1) and CrPO₄-AlPO₄ (CrAIP) catalysts, has been studied at different temperatures (473–673 K). The reaction is first order in phenol, giving a mixture of O- and C-alkylated products (C-alkylation taking place preferentially at theortho-position). Moreover, dimethyl carbonate is a better methylating agent than methanol.     

Linear silver clusters in aqueous solution (clusterites): radiation-induced chemical synthesis and properties

The formation and properties of the products of the radiation-induced chemical reduction of silver ions in aqueous solutions containing sodium polyacrylate were investigated. The absorption spectra of these species exhibit a band at 290 mn and a band in the visible region. The latter shifts from 470 nm to -800 nm with time or after the addition of silver ions. The species obtained (clusterites) arc linear silver clusters bound to the carboxyl groups of the ion exchanger. The red shift of the visible band is due to the increase in their size. The mechanism of the formation and the structure of the clusterites are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1429–1435, June, 1996.     

金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

Synthesis of New Difurocoumarins

5,7-Dihydroxy-4-methyl- and 5,7-dihydroxy-4-trifluoromethylcoumarins are starting compounds in the synthesis of new 10-methyl-8H-difuro[2,3-f;2,3-h]-8-ones and 10-trifluoromethyl-8H-difuro-[2,3-f;2,3-h]chromen-8-ones with high yields.     

Structural investigation of high-valent manganese-salen complexes by UV/Vis,Raman, XANES,and EXAFS spectroscopy

XANES and EXAFS spectroscopic studies at the Mn-K- and Br-K-edge of reaction products of (S,S)-(+)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediaminomanganese(III) chloride ([(salen)Mn(III)Cl], 1) and (S,S)-(+)-N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediaminomanganese(III) bromide ([(salen)Mn(III)Br], 2) with 4-phenylpyridine N-oxide (4-PPNO) and 3-chloroperoxybenzoic acid (MCPBA) are reported. The reaction of the Mn(III) complexes with two equivalents of 4-PPNO leads to a hexacoordinated compound, in which the manganese atom is octahedrally coordinated by four oxygen/nitrogen atoms of the salen ligand at an average distance of approximately 1.90 A and two additional, axially bonded oxygen atoms of the 4-PPNO at 2.25 A. The oxidation state of this complex was determined as approximately +IV by a comparative study of Mn(III) and Mn(V) reference compounds. The green intermediate obtained in reactions of MCPBA and solutions of 1 or 2 in acetonitrile was investigated with XANES, EXAFS, UV/Vis, and Raman spectroscopy, and an increase of the coordination number of the manganese atoms from 4 to 5 and the complete abstraction of the halide was observed. A formal oxidation state of IV was deduced from the relative position of the pre-edge 1s-->3d feature of the X-ray absorption spectrum of the complex. The broad UV/Vis band of this complex in acetonitrile with lambda(max)=648 nm was consistent with a radical cation structure, in which a MCPBA molecule was bound to the Mn(IV) central atom. An oxomanganese(V) or a dimeric manganese(IV) species was not detected.     

Determination of the valence distribution of vanadium in polyolefin catalysts prepared from vanadium trichloride

An electrochemical method has been developed for determining the relative amounts of V(II) and V(III) in polyolefin catalysts prepared using aluminum alkyls and vanadium trichloride. The catalyst, usually obtained as a slurry in n-heptane, is titrated potentiometrically with ceric sulfate using a platinum indicator electrode. Under proper experimental conditions, 2 breaks are obtained, corresponding to the reactions V(II) →V(III) + e and V(III) →V(IV) + e. Interferences from other components of the catalyst are negligible. The method is useful for the analysis of both laboratory catalysts and grab samples taken from pilot plant reactors.