Structural modifications of diamond like carbon films induced by MeV nitrogen ion irradiation

Diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates using plasma deposition technique. The deposited films were irradiated using 2 MeV N⁺ ions at fluences of 1×10¹⁴, 1×10¹⁵ and 5×10¹⁵ ions/cm². Samples have been characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Analysis of Raman spectra shows a gradual shift of both D and G band peaks towards higher frequencies along with an increase of the intensity ratio, I(D)/I(G), with increasing ion fluence in irradiation. These results are consistent with an increase of sp² bonding. XPS results also show a monotonic increase of sp²/sp³ hybridization ratio with increasing ion fluence. Plan view TEM images show the formation of clusters in the irradiated DLC films. HRTEM micrographs from the samples irradiated at a fluence of 5×10¹⁵ ions/cm² show the lattice image with an average interplanar spacing of 0.34 nm, revealing that the clusters are graphite clusters. The crystallographic planes in these clusters are somewhat distorted compared to the perfect graphite structure.     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

In situ identification of organic components of ink used in books from the 1900s by atmospheric pressure matrix assisted laser desorption ionization mass spectrometry

Transport of N, O, and Ti during dc magnetron sputtering deposition of nanoscopic TiN/Ti and TiN structures on plasma nitrided M2 tool steel, as well as transport of metallic species composing the plasma nitrided steel substrates were investigated. N and O depth distributions were determined with subnanometric resolution using narrow resonant nuclear reaction profiling, whereas Ti was profiled, also with subnanometric depth resolution, by medium energy ion scattering. The surface elementary compositions of the TiN/Ti/nitrided steel and TiN/nitrided steel structures were determined by low energy ion scattering. The chemical compounds formed during deposition were accessed by X-ray photoelectron spectroscopy, indicating the presence of TiN, TiO₂, Ti oxynitrides, as well as other metallic nitrides and oxynitrides, but no metallic Ti was observed. Owing to the observed intensive atom mobility, the compositions of the deposited films on plasma nitrided steel structures varied continuously on a nanoscopic scale, from the core of the steel substrate to the bulk of the stoichiometric TiN films. The Ti interlayer assists interdiffusion of all species, in contrast to the TiN film layer, which is known to be a diffusion barrier. The improved adhesion of TiN hard coatings to plasma nitrided steel under working conditions is discussed in terms of the gradual compositional change around the interfaces and the atomic mobility during their formation.     

Computational study of plasma-surface interaction in plasma-assisted technologies

The influence of the unevenness of substrates immersed into plasma important for plasma-based treatment of materials were studied by computer experiment. The role of both substrate properties and plasma parameters was investigated. For this analysis the combination of multidimensional fluid modelling and particle simulation was used. The fluid part of our model consisted of continuity equations for all charged species, energy balance equation for electrons and Poisson equation. The basic scattering processes were also included. The particle simulation technique was used both for the calculation of electron energy distribution function and for the derivation of quantities characterising plasma-surface interaction. This approach enabled us to study in detail the structure of the sheath and presheath near metal substrates with realistic geometries and finite dimensions. The main attention was devoted to the influence of substrate geometry in both macroscopic and microscopic spatial scales on the local electric fields in plasma.     

The double M-effect induced by noble gases activated with negative ions

The M-effect (monochromatization-effect) is a powerful tool which can give high intensity monochromatic spectra with a certain wavelength depending on the type of used gas mixtures to generate plasma state. The effect consists in the emission of a single spectral line of plasmas ignited in certain gas mixtures. The main condition to obtain the M effect is the presence of an electropositive and an electronegative gas mixture. For example, in the case of Ne+H₂ monochrome radiation was obtained, the wavelength of Ne being 585.3 nm (1s²–2p⁵). In this paper we prove the general character of this effect, i.e. if the optical emission spectra reduced to nearly one line can be observed also in other gas mixture discharges, for example in the case of one electronegative gas and two electropositive gases. Different other mixtures, as Xe+Ne+H₂ and Xe+Ar+H₂ have been studied. In all these cases, the M-effect appeared without doubt.     

Temperature and density spectroscopic measurements in different laser-generated plasmas

A pulsed Nd:Yag laser, at intensities of the order of 10¹⁰ W/cm², is employed to irradiate different thick metallic targets (Ti, Fe, Ag, and Ni) placed in vacuum. The obtained non-equilibrium plasmas are investigated with various analytical techniques. An electrostatic ion energy analyzer and different ion collectors are employed to monitor in situ the ions ejected from the plasma and to determine the core plasma temperature, the ion energy distributions and the ion angular emission. An optical spectrometer is employed to analyze the plasma corona emitted light vs. wavelength and to identify the emitted characteristic lines. The optical spectroscopy permitted to evaluate the electron temperatures and densities. Results show strong temperature and density gradients occurring in the laser-generated plasma plume.     

Electromagnetic field distributions in waveguide-based axial-type microwave plasma source

We present results from simulations of 2D distributions of the electromagnetic field inside a waveguide-based axial-type microwave plasma source (MPS) used for hydrogen production via methane reforming. The studies are aimed at optimization of discharge processes and hydrogen production. We derive equations for determining electromagnetic field distributions and next determine the electromagnetic field distributions for two cases – without and with plasma inside the MPS. For the first case, we examine the influence of the length of the inner conductor of the coaxial line on electromagnetic field distributions. We have obtained standing wave patterns along the coaxial line and found resonances for certain positions of the coaxial line inner conductor. For the case with plasma inside the MPS, we perform calculations assuming that distributions of plasma parameters are known. Simulations are done for several values of maximum electron density. We have found that for values of electron density greater than strong skin effect in the plasma is observed. Consequently, plasma may be treated as an extension of the inner conductor of the coaxial line. We have used FlexPDE software for the calculations.     

Reply to comment on “On the controversy around Daganzo’s requiem for and Aw-Rascle’s resurrection of second-order traffic flow models” by H.M. Zhang

This contribution compares several different approaches allowing one to derive macroscopic traffic equation directly from microscopic car-following models. While it is shown that some conventional approaches lead to theoretical problems, it is proposed to use an approach reminding of smoothed particle hydrodynamics to avoid gradient expansions. The derivation circumvents approximations and, therefore, demonstrates the large range of validity of macroscopic traffic equations, without the need of averaging over many vehicles. It also gives an expression for the “traffic pressure”, which generalizes previously used formulas. Furthermore, the method avoids theoretical inconsistencies of macroscopic traffic models, which have been criticized in the past by Daganzo and others.     

Synchronization in evolving snowdrift game model

The interaction between the evolution of the game and the underlying network structure with evolving snowdrift game model is investigated. The constructed network follows a power-law degree distribution typically showing scale-free feature. The topological features of average path length, clustering coefficient, degree-degree correlations and the dynamical feature of synchronizability are studied. The synchronizability of the constructed networks changes by the interaction. It will converge to a certain value when sufficient new nodes are added. It is found that initial payoffs of nodes greatly affect the synchronizability. When initial payoffs for players are equal, low common initial payoffs may lead to more heterogeneity of the network and good synchronizability. When initial payoffs follow certain distributions, better synchronizability is obtained compared to equal initial payoff. The result is also true for phase synchronization of nonidentical oscillators.     

Microwave propagation parameters in magnetic fluids

Complex dielectric permittivity and complex magnetic permeability measurements of two magnetic fluids (as microwave propagation media), in the approximate range 0.2-5GHz were performed. The two samples consisted of magnetite nanoparticles, dispersed in kerosene and in water, respectively. Based on the dielectric and magnetic measurements, the frequency (f ) dependence of the attenuation parameter, , the phase constant, , the propagation constant, , the intrinsic impedance, Z_m, the refractive index, n , the reflection coefficient, R , the wavelength, and the skin depth, , of the investigated samples were determined.