Efficient polymer white-light-emitting diodes with a single-emission layer of fluorescent polymer blend

Efficient polymer white-light-emitting diodes (WPLEDs) have been fabricated with a single layer of fluorescent polymer blend. The device structure consists of ITO/PEDOT/PVK/emissive layer/Ba/Al. The emissive layer is a blend of poly(9,9-dioctylfluorene) (PFO), phenyl-substituted PPV derivative (P-PPV) and a copolymer of 9,9-dioctylfluorene and 4,7-di(4-hexylthien-2-yl)-2,1,3-benzothiadiazole (PFO-DHTBT), which, respectively, emits blue, green and red light. The emission of pure and efficient white light was implemented by tuning the blend weight ratio of PFO: P-PPV: PFO-DHTBT to 96:4:0.4. The maximum current efficiency and luminance are, respectively, 7.6 cd/A at 6.7 V and 11930 cd/m² at 11.2 V. The CIE coordinates of white-light emission were stable with the drive voltages.     

First-principles study on the transport properties of phenyl dithiol oligomers

We present first-principles studies on the transport properties of oligomers, polyphenyl dithiol, PP(n)DTs, sandwiched between two Al(1 0 0) electrodes. The variation of the current-voltage curve for PP(2)DT in different tilt angles is investigated systematically. The results indicate that PP(2)DT can be functioned as a molecular switch controlled by molecular conformation. We also study the variation of the equilibrium conductance and current-voltage properties of PP(n)DT as a function of n.     

Electrically induced flows in the vicinity of a dielectric stripe on a conducting plane

We report a theoretical and experimental study of the hydrodynamic flow induced by an a.c. electric field in the vicinity of a dielectric stripe deposited on a conducting plate. In the theoretical part, we model the stripe as a small change of the surface capacitance of the plate, and a perturbative approach is used to perform the calculations. This approach predicts an outwards rectified electro-osmotic slip along the surface that generates two steady counter-rotating rolls, the size of which decreases with the frequency. In the experimental section, we use tracers to determine the structure of the flow and investigate its dependence on the frequency and the amplitude of the applied voltage. The structure and amplitude of the observed flow compares satisfactorily with the theoretical analysis. This could guide the design of surface-controlled flows and help to understand the collective behavior of colloids near electrodes. Received 20 June 2002 RID="a" ID="a"e-mail: nadal@crpp.u-bordeaux.fr     

Adsorptive stripping voltammetric determination of traces of molybdenum in natural water in the presence ofα-benzoinoxime

The electrochemical behavior of the molybdenum complex of -benzoinoxime was investigated using cyclic voltammetry and linear scan voltammetry, after adsorptive accumulation of the complex onto a hanging mercury drop electrode (HMDE). The signal corresponds to the reduction of molybdenum in the complex adsorbed at the HMDE surface. Under optimal conditions, the adsorptive stripping voltammetric procedure gave an extremely low detection limit of 0.1 nM (9.6ng/l) Mo(VI) following stirred accumulation for 5 min at 0.0 V (vs. Ag/AgCl). The reduction cur rent-[Mo(VI)] relationships were linear up to 25 and 100 nM. Repetitive determinations of 10 nM solutions gave relative standard deviations of 2.2 and 3.5%, for 1 and 5-min accumulation periods, respectively. Most of the ions investigated did not interfere with the determination of molybdenum, except for tungsten. Excellent selectivity against copper was observed. The proposed procedure was applied to the direct determination of molybdenum in natural water.     

The first example of direct heterylation of calixpyrrole

1,2,4-Triazine derivatives react with calixpyrrole to give stable nucleophilic addition products.     

Electroreduction of Pd(II) Complexes with α-Alanine on a Palladium Electrode

The kinetics of electroreduction of Pd(II) complexes with -alanine, Pd(ala)₂, is studied on a rotating Pd disk electrode in solutions of pH 8–13 containing large excess of -alanine and various supporting electrolytes (NaF, Na₂SO₄, NaClO₄). On a Pd electrode, complexes Pd(ala)₂ undergo reduction at potentials much more negative than on an Hg electrode. This is attributed to the chemisorption of water on the Pd electrode, which hampers adsorption of Pd(ala)₂ that take part in the slow electrochemical stage. As with the Hg electrode, perchlorate ions hinder the Pd(ala)₂ reduction on a Pd electrode. Studying adsorption of Pd(ala)₂ on a Pd electrode is hampered by parallel processes of hydrogen adsorption and absorption.     

Arbuzov rearrangement in the 1,3,2-oxazaphosphinane series

Reactions of 2-alkoxy-1,3,2-oxazaphosphinanes (including 3-alkyl derivatives) with methyl and ethyl bromoacetates give two types of Arbuzov rearrangement products (cyclic and acyclic ones). The ratio between their yields is virtually independent of the nature of the substituent in position 3 of the starting reagent, being mainly determined by the nature of the substituent in the phosphorus bound alkoxy group and varying from 96 : 4 to 2 : 98. Acyclic products can be converted into cyclic ones.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1915–1918, September, 2004.     

Apparent Molar Volume, Heat Capacity, and Conductance of Lithium Bis(trifluoromethylsulfone)imide in Glymes and Other Aprotic Solvents

Lithium bis(trifluoromethylsulfone)imide (LiTFSI) is a promising electrolyte for high-energy lithium batteries due to its high solubility in most solvents and electrochemical stability. To characterize this electrolyte in solution, its conductance and apparent molar volume and heat capacity were measured over a wide range of concentration in glymes, tetraethylsulfamide (TESA), acetonitrile, -butyrolactone, and propylene carbonate at 25°C and were compared with those of LiClO₄ in the same solvents. The glymes or n(ethylene glycol) dimethyl ethers (nEGDME), which have the chemical structure CH₃–O–(CH₂–CH₂–O) _n –CH₃ for n = 1 to 4, are particularly interesting since they are electrochemically stable, have a good redox window, and are analogs of the polyethylene oxides used in polymer-electrolyte batteries. TESA is a good plasticizer for polymer-electrolyte batteries. Whenever required, the following properties of the pure solvents were measured: compressibilities, expansibilities, temperature and pressure dependences of the dielectric constant, acceptor number, and donor number. These data were used in particular to calculate the limiting Debye-Hückel parameters for volumes and heat capacities. The infinite dilution properties of LiTFSI are quite similar to those of other lithium salts. At low concentrations, LiTFSI is strongly associated in the glymes and moderately associated in TESA. At intermediate concentrations, the thermodynamic data suggests that a stable solvate of LiTFSI in EGDME exists in the solution state. At high concentrations, the thermodynamic properties of the two lithium salts approach those of the molten salts. These salts have a reasonably high specific conductivity in most of the solvents. This suggests that the conductance of ions at high concentration in solvents of low dielectric constant is due to a charge transfer process rather than to the migration of free ions.     

Stability of Ibuprofen in its Inclusion Complex with β-Cyclodextrin

The ibuprofen--cyclodextrin inclusion complex was prepared by theco-precipitation method. The identity of the obtained product was verified by X-ray and thermogravimetric techniques. The effect of -cyclodextrin on the stability of ibuprofen was analysed.