Elongating the area of plasma/fluid interaction of surface nanosecond pulsed discharges

Plasma-assisted flow control is of high industrial interest, but practical applications at full scale require a large surface of interaction. Nanosecond pulsed Dielectric Barrier Discharge (DBD) have demonstrated promising results of flow control, but their interacting region is limited to only a few cm². In this paper, the conditions to extend a surface nanosecond DBD are documented. It is shown that a sliding discharge regime can fully fill an inter-electrode distance of 40 mm. This discharge regime promotes the formation of two hemispheric pressure waves originating from both air-exposed electrodes while an horizontal region of pressure gradient is also observed.     

多排叶片内部流动以及叶片排与排气系统相互作用研究

本文采用高分辨率格式和多块多网格方法求解雷诺平均Navier-Stokes方程,数值模拟多排叶片内的三维粘性流动;使用数值激盘模拟叶片排的存在,研究叶片排与非轴对称排气部件之间的相互作用以及复杂的内部流动。文中描述了数值方法,给出了NASA透平导叶和单级透平内部流场的数值结果及其与相应实验结果的对比,也给出了多级透平内部流场的数值结果,以及透平与排气部件之间的耦合流场的结果。     

Control of a turbulent flow separated at mid-chord along an airfoil with DBD plasma actuators

The goal of the present experimental study is to investigate the ability of surface DBD plasma actuators to delay flow separation along the suction side of a NACA0015 airfoil. Three single surface DBD actuators that can operate separately are mounted on the suction side of the profile, at 18%, 27% and 37% of the chord length. The boundary layer is transitioned by a tripper to be sure that the flow control is not due to the laminar-to-turbulent transition. The angle of attack is equal to 11.5° and the free-stream velocity to U₀ = 40 m/s, resulting in a chord-based Reynolds number of Re_c = 1.33 × 10⁶. The flow is studied with a high-resolution PIV system. In such conditions, the baseline flow separation occurs at 50% of chord. Then, the different single DBD have been switched on separately, in order to investigate the actuator location effect. One highlights that the DBD located at x_c/c = 18% is more effective than the two others ones, with a separation delay up to 64% of chord. When the three DBDs operate simultaneously, the separation point moves progressively toward the trailing edge when the high voltage is increased, up to 76% of chord at 20 kV. Finally, the effect of the actuation frequency on the control authority has been investigated, by varying the value of the operating frequency and by burst-modulation. For frequencies equal to 50 Hz and 500 Hz (reduced frequency F⁺ = 0.31 and 3.1), the separation has been delayed at 76 and 80% of chord, respectively.     

Effect of tensile load on the actuation performance of pH‐sensitive hydrogels

pH‐responsive hydrogels are capable of converting chemical energy to mechanical work. To optimize their use as actuators, their response when operating against an external load must be fully characterized. Here, the actuation strain of a model pH‐sensitive hydrogel as a function of different constant loads is studied. The experimental actuation strain, produced by switching the pH from 2 to 12, decreases significantly and monotonically with increasing initial tensile load. Two models are developed to predict the actuation strain as a function of applied stress. Simple mechanical models based on the change in hydrogel modulus and cross sectional area due to the change in pH are unsatisfactory as they predict only a small change in actuation strain with increasing external stress. However, the model based on the elastic and mixing free energy functions derived from the Flory–Huggins theory is found to accurately account for the actuation strain as a function of stress. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 218–225     

Snap-through path in a bistable dielectric elastomer actuator

The dielectric elastomer (DE) has attracted significant attention due to its desired features, including large deformation, fast response, and high energy density. However, for a DE actuator (DEA) utilizing a snap-through deformation mode, most existing theoretical models fail to predict its deformation path. This paper develops a new finite element method (FEM) based on the three-parameter Gent-Gent model suitable for capturing strain-stiffening behaviors. The simulation results are verified by experiments, indicating that the FEM can accurately characterize the snap-through path of a DE. The method proposed in this paper provides theoretical guidance and inspiration for designing and applying DEs and bistable electroactive actuators.     

Effect of Thermal Treatment on Preshaped Ionic Polymer Metal Composite (IPMC) Actuators

A new method to fabricate ionic polymer metal composite (IPMC) actuators with a 3-dimensional preshaped form by a simple thermal treatment process is demonstrated. The effects of the thermal treatment process on the properties of the actuator are analyzed and the characteristics of the actuator, such as stiffness, displacement and resonance, generating force, and repeated motions, are compared with those of unheated IPMC actuators. The experimental results show that thermal-treated IPMC actuators have improved generating force as well as preshaping of the 3-dimensional form.     

Processing optimization: A way to improve the ionic conductivity and dielectric loss of electroactive polymers

Electro‐active polymers (EAPs) such as P(VDF‐TrFE‐CTFE) are greatly promising in the field of flexible sensors and actuators, but their low dielectric strength driven by ionic conductivity is a main concern for achieving high electrostrictive performance. It is well known that there is a quadratic dependence of the strain response and mechanical energy density on the applied electric field. This dependence highlights the importance of improving the electrical breakdown EAPs while reducing the dielectric losses. This article demonstrates that it is possible to dramatically increase the electrical breakdown and decrease the dielectric losses by controlling processing parameters of the polymer synthesis and fabrication procedure. As a result, an enhancement of around 70% is achieved in both the strain and blocking force. The effects on the dielectric losses of the polymer crystallinity, molecular weight, solvent purity, and crystallization temperature are also investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1164–1173     

Optically driven actuators using poly(vinylidene difluoride)

Optically driven actuators have a feature of a non-contact method supplied by light energy. A new method is proposed with three poly(vinylidene difluoride) (PVDF) cantilevers as the legs and a polymer film as the body. The PVDF cantilevers are coated with silver on one surface. When one side of the cantilever is irradiated by a laser beam, an electric field is produced along a cross-section of the cantilever by the pyroelectric effect and a mechanical displacement occurs by the piezoelectric effect. Its response time and its generated force are measured experimentally. Two types of optically driven actuators using PVDF film are proposed to move using different characteristics.     

Redundant actuators to achieve minimal vibration trajectory tracking of flexible multibodies: Theory and application

We address the problem of inverse dynamics for flexible multibodies, which arises, in trajectory tracking control of flexible multibodies such as space manipulators and articulated flexible structures. Previous research has resolved this trajectory tracking problem by computing the system inputs for feedforward control of actuators at the joints. Recently, the use of distributed actuators like electro-strictive actuators in flexible structures has introduced a new dimension to this trajectory tracking problem. In this paper we optimally utilize such actuators to aid joint actuators for tracking control, and introduce a new inverse dynamics scheme for simultaneously (1) tracking a prescribed trajectory and (2) minimizing ensuing elastic deflections. We apply this scheme for trajectory tracking of a two-link two-joint planar manipulator with joint motors and distributed electro-strictive actuators. Experimental results are presented to contrast our new scheme with other existing methods.