Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

L波段高功率线极化径向线阵列天线理论分析与数值模拟

 探索了L波段的高功率线极化径向线阵列天线。基于三角形栅格形式实现了径向线圆形平面阵列天线,分析并给出了径向线并联馈电网络,并以同轴馈电的水平单圆环线极化天线为基础,利用径向线并联馈电网络设计出了间距小于一个波长下L波段高功率线极化径向线阵列天线。研究结果表明：这种结构实现径向线阵列天线的线极化辐射是可行的,该天线在中心频率1.57 GHz下,增益为19.97 dBi,轴比为-52.06 dB,反射系数为0.105 2;在1.37～1.77 GHz的频率范围内增益大于18.64 dBi,轴向轴比值小于-46.45 dB。     

质子交换光波导生长动力学研究

分析了质子交换光波导的生长动力学并给出了波导层厚度与生长时间的计算公式。     

Compact multimode interference coupler with tapered waveguide geometry

In this paper, a novel MMI coupler, based on general interference, with tapered waveguide geometry has been proposed for reduction of coupling length. The coupling characteristics and power imbalance of the proposed structure are compared with conventional MMI structures by using a mathematical model based on sinusoidal modes. It is seen that the beat length for tapered MMI coupler with angle of taper ∼1.05° is reduced by ∼24% of that of conventional MMI coupler and the coupling characteristics obtained with the mathematical model, match well with those obtained by more sophisticated BPM computer aided design software. The power imbalance for tapered 3 dB MMI coupler is more sensitive to the wavelength than that for conventional 3 dB MMI coupler and variation of power imbalance with fabrication tolerance for both the MMI coupler is almost same.     

带有增益介质层的混合脊状等离子体波导的传输特性

在传统脊状等离子体波导的基础上设计了一种带有增益介质层的新型混合脊状等离子体波导,其结构中的介质层部分包含两个区域:前区为单一介质,后区的脊是由2种介质构成的双层脊区。采用二维时域有限差分方法分析了波导结构的传输特性,得到了TM模下的电场分布图,并对输出功率以及传输损耗与结构参数和介质折射率的变化规律进行了讨论。结果表明,在波导中引入的增益介质材料磷化铟后其损耗达到-6 dB/μm。此种波导结构对于光集成芯片的研究与制作具有重要意义。     

2.45 GHz ECR离子源的微波阻抗匹配

ECR离子源的等离子体阻抗对其微波传输与阻抗匹配设计至关重要。在中国科学院近代物理研究所现有的2.45 GHz ECR 质子源上,对等离子体阻抗进行了测量。首先用水吸收负载代替等离子体负载测量得到了所用微波窗阻抗,然后根据质子源测量数据,推算得到了等离子体阻抗。实验结果表明,脊波导输出端阻抗与后续负载不完全匹配,等离子体阻抗随微波功率变化呈非线性。这些结果为ECR离子源过渡匹配和微波窗的设计提供了参考依据。Plasma impedance of an ECR ion source is important for microwave transmission and impedance matching design. Plasma impedance was measured indirectly with the 2.45 GHz ECR proton source at the Institute of Modern Physics, Chinese Academy of Sciences. In the test, we got microwave window mpedance by using water absorption load instead of plasma load, and the source plasma impedance was derived from the test data with the 2.45 GHz ECR proton source and microwave window impedance. The experimental results show that ridge waveguide output impedance and the subsequent load does not exactly match, plasma impedance variation is nonlinear with microwave power. The achievedresult is useful in the design of ridged waveguide and microwave window.     

分辨率为1pm的波长监测新方法

在亚毫米尺度金属包覆波导研究基础上，提出了一种波长监测的新方法.实验采用自由空间耦合技术，激发了波导中对波长变化十分灵敏的超高阶导模，并以此为探针，实现了1pm波长漂移的监测. 关键词： 波长监测 金属包覆波导 超高阶导模     

Characterization and Spatial Matching of Laser Diode Beams

It is shown that the type of lateral waveguide of a laser diode cannot be determined uniquely based on just the measured magnitude of astigmatism. For a unique determination, the K-factor of Petermann, which characterizes the wavefront curvature at the laser output facet, must be measured as well. In order to determine the type of lateral waveguide, a setup for measuring astigmatic distances in the range 0–200 m with an error of ±2 m and a K-factor with an error of 20% was developed. Operational features of the setup were analyzed, and a technique that allows one to minimize the effect of beam ellipticity on the measurement results was found. Using the technique, the optimization of spatial matching of a laser diode with a ring interferometer of the butterfly type was accomplished. For transformation of the astigmatic elliptical beam into the axially symmetric mode of the interferometer, we have used an optical system that consists of two cylindrical and one spherical lenses. The algorithm for designing the matching system was developed, and the 85% injection of radiation of a AlGaAs laser diode into the principal mode of a ring interferometer was experimentally demonstrated.     

钛扩散铌酸锂矩形波导中的双折射耦合对传播常数的影响

 从亥姆霍兹方程出发，得到了各向异性光波导在弱导近似下的耦合模理论。耦合系数包括偏振耦合项和双折射耦合项。并用马卡提里近似下的模式作为零级近似。用一级微扰法计算了折射率渐变分布的钛扩散铌酸锂矩形波导的传播常数。在给定参数的情况下，得到双折射项引起的传播常数的改变约为主微扰项的3%，因此双折射耦合对钛扩散铌酸锂矩形波导的性能影响不可忽略，这对设计和分析与它相关的光波导器件具有指导意义。