Molecular dynamics modeling in quantum chemical calculations. Optical absorption spectra of 1,3-Dimethyl-1H-Pyrazolo[3,4-b]quinoline derivatives

Paper presents the quantum chemical modeling of the optical absorption spectra of 6-fluoro, 6-bromo, 7-trifluoromethyl, 6-cyano and 6-carboethoxy derivatives of 1,3-Dimethyl-1H-Pyrazolo[3,4-b]quinoline. The calculations are performed by means of the semiempirical quantum chemical methods (AM1 or PM3) in combination with molecular dynamics (MD) simulations at T=300 K. It is shown that a particular rotational dynamics of the methyl, trifluoromethyl or ethyl groups practically does not influence the optical absorption in the spectral range 200-500 nm whereas broadening of absorption bands may be well reproduced within MD simulations including all types of nuclei vibrations. The results of calculations are compared with the measured spectra of optical absorption. The quantum chemical method AM1 in combination with MD simulations gives for all dyes the best agreement between the calculated and measured spectral positions of the first absorption band (absorption threshold).     

紫外光引发甲基丙烯酸甲酯乳液聚合

以60W高压汞灯为光源,以偶氮二异丁氰(AIBN)为主要光引发剂,以甲基丙烯酸甲酯(MMA)为单体进行乳液聚合,考察了光照时间、单体浓度、光引发剂浓度等因素对单体转化率的影响;采用透射电镜观察了乳胶粒的形态,并测定了其尺寸.结果表明,转化率随光照时间和单体浓度的增加而上升;当光引发剂质量分数为3%时单体转化率最高.     

A picosecond widely tunable deep-ultraviolet laser for angle-resolved photoemission spectroscopy

We develop a picosecond widely tunable laser in a deep-ultraviolet region from 175 nm to 210 nm,generated by two stages of frequency doubling of a 80-MHz mode-locked picosecond Ti:sapphire laser.A β-BaB2O4 walk-off compensation configuration and a KBe2BO3F2 prism-coupled device are adopted for the generation of second harmonic and fourth harmonics,respectively.The highest power is 3.72 mW at 193 nm,and the fluctuation at 2.85 mW in 130 min is less than ±2%.     

A Photochemistry Technique Using Ultraviolet Irradiation Followed by Gas-Liquid Chromatography to Confirm the Identity of Some Organochlorine Pesticides

Abstract

A procedure involving ultraviolet (UV) irradiation followed by gas-liquid chromatographic (GLC) detection of photodecomposition products to confirm the identity of selected organochlorine pesticides is described. The Irradiation intensity was standardized by determining the position relative to the UV source which resulted in equal GLC peak heights for the parent compound and major photo-decomposition product after 8 minutes of exposure of a solution of heptachlor epoxide in isooctane. Chromatograms showing photo-decomposition patterns for 33 compounds are presented. Observations and comments on the applicability of this technique to organo-chlorine pesticide residue confirmation are reported.     

Determination of the Onset of Asphaltene Precipitation by Visible Ultraviolet Spectrometry and Spectrofluorimetry

Abstract

Asphaltene deposition is a problem for the petroleum industry, affecting the production, transport, and storage of crude oil. The aim of this work is to develop and compare different methods to determine asphaltene precipitation. Two asphaltene fractions, one extracted from a Brazilian crude oil sample and the other from petroleum distillation residue, were evaluated by using model systems constituted of toluene/n-heptane in different compositions, using visible ultraviolet spectrometry and spectrofluorimetry. The results of the precipitation tests carried out by these two methods agreed, indicating they are effective to analyze asphaltene deposition and the performance of chemicals as asphaltene stabilizers.     

Slow-rise and fast-drop current feature of ultraviolet response spectra for ZnO-nanowire film modulated by water molecules

This study describes the fabrication of ZnO-nanowire films by electro-chemical anodization of Zn foil.The ZnO films are characterized by field emission scanning electron microscopy,X-ray diffraction patterns,and transmission electron microscopy,respectively.The ultraviolet(UV) photo-response properties of the surface-contacted ZnO film are studied through the current evolution processes under different relative humidities.Unlike the usually observed current spectra of the ZnO films,the drop time is shorter than the rise time.The photo-conductivity gain G and the response time τ are both increased with the increase of the applied bias.The photo-conductivity gain G is lowered with the increase of the environmental humidity,while the response time τ is increased.These results can be explained by considering three different surface processes:1) the electron-hole(e-p) pair generation by the UV light illumination,2) the following surface O2-species desorption,and 3) the photo-catalytic hydrolysis of water molecules adsorbed on the ZnO surface.The slow-rise and fast-drop current feature is suggested to originate from the sponge-like structure of the ZnO nanowires.     

Ultra high performance liquid chromatography-quadrupole-time of flight analysis for the identification and the determination of resveratrol and its metabolites in mouse plasma

Resveratrol is a polyphenol that has numerous interesting biological properties, but, per os, it is quickly metabolized. Some of its metabolites are more concentrated than resveratrol, may have greater biological activities, and may act as a kind of store for resveratrol. Thus, to understand the biological impact of resveratrol on a physiological system, it is crucial to simultaneously analyze resveratrol and its metabolites in plasma. This study presents an analytical method based on UHPLC-Q-TOF mass spectrometry for the quantification of resveratrol and of its most common hydrophilic metabolites. The use of ¹³C- and D-labeled standards specific to each molecule led to a linear calibration curve on a larger concentration range than described previously. The use of high resolution mass spectrometry in the full scan mode enabled simultaneous identification and quantification of some hydrophilic metabolites not previously described in mice. In addition, UHPLC separation, allowing run times lower than 10 min, can be used in studies that requiring analysis of many samples.     

Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

Mediated Generation of Conjugate Acid by UV and Blue Sensitizers with Upconversion Nanoparticles at 980 nm

NIR and UV exposure of systems comprising upconversion nanoparticles ( UCNP ) based on NaYF₄:Tm/Yb@NaYF₄, a sensitizer absorbing either in the blue or UV region, and an onium salt with weak coordinating anion resulted in formation of conjugate acid (con-H⁺). That was namely Ivocerin (di(4-methoxybenzoyl)diethylgermane), ITX (2-iso-propyl thioxanthone), anthracene, pyrene, rubrene, camphore quinone, and a strong fluorescent coumarin (1,1,6,6,8-pentamethyl-2,3,5,6-tetrahyhdro-1H,4H-11-oxa-3a-aza-benzo[de]anthracene-10-one). Quantification occurred by treatment with Rhodamine B lactone whose color switched to intensive red after photolytic formation of con-H⁺. Exposure with a NIR laser at 980 nm resulted in less con-H⁺ compared to 395 nm where all sensitizers absorb radiation. UCNP did not mainly interfered formation of con-H⁺. The different rates obtained in both experiments responsibly explain the failure and success to initiate polymerization of epoxides applying ether 980 nm or 395 nm excitation, respectively.     

用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。