Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

A novel hyperbranched polyester acrylate used for microfabrications

A novel hyperbranched polyester acrylate (HPEA) was synthesized based upon ethylenediamine tetraacetic acid as a “core” molecule, 5‐hydroxyisophthalic acid as an AB₂ monomer, and 2‐hydroxyethyl acrylate as an endcapping reagent. The obtained oligomer has an unsaturation concentration of 4.10 mmol_C?C g^?1 measured by nuclear magnetic resonance and a wide molecular weight distribution of 1.64 measured by gel permeation chromatography. The two‐photon absorption (TPA) photopolymerization of HPEA under the exposure of a Ti : sapphire femtosecond laser with a wavelength of 800 nm was investigated through laser exposure dose‐dependant spatial resolutions of its resins. The TPA photopolymerization thresholds at the range 1.6–4.3 × 10⁷ mJ cm^?2, and exposure dose windows at the range 3.4–4.3 for three formulations were determined. A spatial resolution of 0.85 μm was obtained through the TPA photopolymerization of the formulation containing 1 wt% photoinitiator and 0.3 wt% photoinhibitor. A diffraction grating and real three‐dimensional coupled gear wheel created by TPA photopolymerization were described to demonstrate the unique capability of HPEA in microfabrications. Copyright © 2004 John Wiley & Sons, Ltd.     

Controlling electron delocalisation in constrained N,N′-dimethyl-4,4′-bipyridinium dications

The synthesis is described of two N,N′-dimethyl-4,4′-bipyridinium salts for which the two pyridinium rings are connected via varying length alkoxy chains attached at the 3,3′-locations.     

含氮给体结构对丙烯腈电荷转移光聚合的影响

<正> 对于正性烯类单体,主要是乙烯基咔唑的电荷转移聚合,诚田已作过详细综述。负性烯类单体的电荷转移聚合主要研究的单体是丙烯腈(AN)及甲基丙烯酸甲酯(MMA)。Barton等研究了芳烃为引发剂的MMA光聚合。我们研究了芳胺为引发剂的光聚合。 芳胺,尤其是芳叔胺,是较强的电子给体,与负性单体在光照下经激基复合物而引发聚合,我们的实验表明,吡啶及其同系物(喹啉与吖啶)并不象吡咯及其同系物(吲哚与咔唑)那样有效地引发AN等负性单体的光聚合(见表1)。从图1所示的结构看,它们有     

Two‐dimensional chromatography as a tool for studying band broadening in size‐exclusion chromatography

Comprehensive 2‐D size‐exclusion chromatography (SEC×SEC) has been realized. SEC×SEC is not a useful technique for characterizing complex polymers. However, it is potentially an elegant tool to study band‐broadening phenomena. If narrow fractions can be collected from the first dimension, the band broadening in the second dimension is only due to chromatographic dispersion. This would allow a clear distinction to be made between chromatographic band broadening (column and extra‐column) and SEC selectivity (band broadening due to sample polydispersity). In comparison with MALDI‐MS, SEC×SEC allows the study of polymers across a much broader molar‐mass range.     

Two-dimensional separation system of coupling capillary liquid chromatography to capillary electrophoresis for analysis of Escherichia coli metabolites

A two-dimensional (2-D) separation system of coupling chromatography to electrophoresis was developed for profiling Escherichia coli metabolites. Capillary liquid chromatography (LC) with a monolithic silica-octadecyl silica column (500 x 0.2 mm ID) was used as the first dimension, from which the effluent fractions were further analyzed by capillary electrophoresis (CE) acting as the second dimension. Field-enhanced stacking was selectively employed as a concentration strategy to interface the two dimensions, which proved to be beneficial for the detection of metabolites. An artificial sample containing 118 standards, some of which lack chromophores or have weak UV absorbance, was used to optimize the 2-D separation system. Under the optimum conditions, 63 components in the artificial sample having absorbance at 254 nm could be well resolved and detected. The utility of the system was demonstrated by comprehensive analysis of E. coli metabolites. Comparing with the previous 2-D separation system we published in Anal. Chem. 2004, 76, 1419-1428, using a longer monolithic column in the first dimension improved the separation efficiency and offered the possibility of increasing the injection volume without compromising the separation efficiency. In the second dimension, field-enhanced stacking was used to improve the concentration sensitivity of the metabolites, and more metabolites in E. coli cell extract were detected and identified using the developed 2-D separation system. In addition, preliminary investigation for future CE-mass spectrometry coupling was also made in the study by using volatile buffers in the capillary LC and CE techniques.     

铝交联皂石的合成和表征及催化性能

用XRD、化学分析、IR、MASNMR、TPD等手段表征了合成皂石及其铝交联物的结构。结果表明:皂石的交联密度与四面体层电荷和交联条件(Al/土比)有关。在乙醇氨化反应中,交联皂石显示了较好的催化活性和选择性。皂石的交联密度与液相产物分布的关系表明层柱材料对此反应具有择形催化作用。醇氨化反应可能是在吸附态NH_3和气相醇分子间进行的。     

Age-dependent variations of cell response to oxidative stress: proteomic approach to protein expression and phosphorylation

We investigated the protein profiles of variously aged rat astrocytes in response to oxidative stress. After H2O2-exposure of cells at 100 microM for 30 min, the relative intensity of ten protein spots changed on two-dimensional (2-D) gels compared with control gels after silver staining. Matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS) analysis after in-gel digestion revealed that six of these spots corresponded to three kinds of proteins, each of which was composed of a protein and its modified form with a different isoelectric point (pI). These three proteins were identified as peroxiredoxins (PRDXs) II and III, and calpactin I light chain (p11). H2O2-exposure increased the intensity of the spot with lower pI and simultaneously decreased that of the spot with higher pI for both PRDXs II and III. In addition, the expression of annexin VII, S-adenosyl-L-homocysteine hydrolase, elongation factor II fragment (EF-II), and adenosine deaminase was increased by H2O2-exposure in astrocytes from variously aged rats. Using the Pro-Q Diamond staining, heat shock protein 60 kDa (Hsp 60) and alpha-tubulin were observed to be phosphorylated upon H2O2-exposure. While phosphorylation of alpha-tubulin was correlated positively with age, the changes in abundance of ten protein spots as described above were independent of age. These results suggest that aging does not suppress the responses aimed at limiting injury and promoting repair brought about by severe oxidative stress, and might affect cell dynamics including the formation of microtubules.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.