直杆塑性动力屈曲的双特征参数解

在关于轴向弹塑性压缩波下直杆塑性动力屈曲的研究中,将临界应力和屈曲惯性项指数参数作为一对特征参数求解.由动力屈曲发生瞬间的能量转换和守恒准则,导出波阵面上的屈曲变形补充约束条件.失稳控制方程、边界条件、塑性波阵面上的连续条件和补充约束条件构成定量求解两个特征参数和动力屈曲模态的完备条件.     

广义双剪应力准则角隅模型

本文将广义双剪应力准则变换为π平面和静水应力轴的柱坐标方程,然后将其角隅光滑化,得到了新的光滑、外凸的广义双剪应力准则角隅模型,研究结果表明,近年来作为光滑化Mohr-Coulomb理论提出的各种角隅模型,实际上并不是光滑化的Mohr-Coulomb理论,而是光滑化的广义双剪应力理论。     

由一个实例引发的对莫尔理论和双剪统一强度理论的改进

以某型火炮身管设计为例,采用双剪统一强度理论对火炮身管的壁厚进行了设计。然而,在火炮身管强度计算中得出了如下结论:当身管外径平方与内径平方之比小于1+b时,若材料的其它参数不变,材料的压缩屈服极限越大,其所能承受内压的能力越差,b为双剪统一强度理论中的参数。这是有悖常理的。针对该现象本文考虑各主应力的正负取值情况,对库伦—莫尔理论和双剪统一强度理论的改进问题进行了探讨。并应用改进的双剪统一强度理论再次计算,得到了满意的结果。     

拉压性能不同材料厚壁圆筒和厚壁球壳的极限压力分析

本文用广义双剪应力强度理论对拉压性能不同的材料制成的厚壁圆筒和厚壁球壳进行了弹塑性应力分析,得出与拉压比有关的弹性极限内压力、塑性极限内压力、弹塑性区的应力以及弹塑性内压力与弹塑性半径之间的关系式．     

Relative nonsymmetry effects of the super (generalized) nonlinear velocity, time of a particle and its kinetic formulae for followed body

IntroductionItiswell-knownthatanearallawalwaysdevelopsfromthelowertothehigher,andthatdescribingaquantitativescienceofthingessenceisalsofromthelinearitytothenonlinearity.In1995,theauthorexpandedthelinearmomentUmploftheNeWtonianmechanicstothenonlinearmomentumbyusingtheLaurentseries,andinwhichitisthesupernonlinearmomentUmincludingallnonlineartCrmsllj.Themomentumisthevectorterminthecombinatorialvector.u.bert2].Theauthorcallsthevelocityinthesupernonlinearmomentumasthesupernonlinearvelocity(somes…     

部分均匀荷载作用下圆板塑性极限统一解

本文采用俞茂宏双剪统一屈服准则求解部分均匀荷载下简支圆板的塑性极限，已有的最大主应力准则、Ｔｒｅｓｃａ准则，Ｍｉｓｅｓ准则的解答均是该解答的特例或线性逼近。该解答可以适合于多种工程材料，具有普遍性和适用性，从得出的解析解和图示中可得出一些新的有益的认识     

Confined impinging twin air jets at high Reynolds numbers

An experimental study is carried out to investigate flow characteristics of confined twin jets issuing from the lower surface and impinging normally on the upper surface. Pressure distributions on the impingement and confinement plates were obtained for Reynolds numbers ranging from 30,000 to 50,000, nozzle-to-plate spacing (H/D) in the range of 0.5-4 and jet-to-jet spacing (L/D) in the range of 0.5-2. Smoke-wire technique was used to visualize the flow behavior. The effects of Reynolds number, nozzle-to-plate spacing and jet-to-jet spacing on the flow structure are examined. The subatmospheric regions occur on both impingement and confinement plates at the nozzle-to-plate spacing up to 1 for all studied Reynolds numbers and jet-to-jet spacings in consideration. They lie nearly up to the same radial location at both surfaces and move radially outward from the stagnation points with increasing nozzle-to-plate spacing and jet-to-jet spacing. It is concluded that there exists a relation between the subatmospheric regions and peaks in heat transfer coefficients for low spacings in the impinging jets.     

Single Production of Top Quark via e-γ Collision in Left-Right Twin Higgs Model

In the context of the left-right twin Higgs （LRTH） model, we fist study single production of the standard model （SM） top quark via e-γ collisions. We find that the corrections of the LRTH model to the cross section of the process e-γ→vebt might be observed only for f ≤750 GeV and the heavy top quark mass scale M ≥500 GeV in future high energy linear e^＋e^- collider （LC） experiment with the center-of-mass （CM） energy √s = 500 GeV and a yearly integrated luminosity of ￡ = 100 fb^-1. We also consider single production of the heavy top quark T via e-γ collisions. Our numerical results show that the possible signals of the heavy top quark T might be observed via the decay channel T →Ф^＋b→tbb in future LC experiment with √s = 3 TeV and ￡ = 500 fb^-1.