An Electroacoustic Investigation of Concentrated Aqueous Suspensions of Calcium Pyrophosphate

The zeta potential of concentrated suspensions of calcium pyrophosphate were investigated using electroacoustics. The particles were negatively charged over the entire pH range studied. It proved impossible to reduce the pH of the suspension below 1.8, but the iso electric point could be estimated to occur at approximately pH 1. Two commercially available dispersants (one cationic and one anionic) were then added in small increments to the suspension in order to follow the change in zeta potential as the dispersants adsorbed onto the particles. From the shape of the curve it was possible to estimate the optimum adsorbed amount of dispersant required to fully coat the particles. The cationic dispersant adsorbed strongly and the optimum dosage was estimated at 2.5 ml of active polymer/kg of powder. Anionic dispersants are known to adsorb onto negatively charged ceramic oxide particles, but the anionic dispersant used in this study did not adsorb onto the negatively charged calcium pyrophosphate particles.     

Total surface areas of Group IVA organometallic compounds: Predictors of toxicity to algae and bacteria

There is a high correlation between molecular surface area (TSA) of triorganotin and triorganolead compounds and their toxicity towards a bacterium (Escherichia coli) and an alga (Selenastrum capricornutum). Parallel attempts to correlate other Group IVA organometals incorporating silicon or germanium were unsuccessful. It was further demonstrated, however, that a high correlation was obtainable between certain series of compounds with the same organic substituent but different metal centers involving all Group IVA elements. In both instances, the inability to obtain a quantitative structure-activity relationship (QSAR) for all systems studied appears to be a function of the solubility of the compounds. While organotin TSA values have been found to correlate well with their toxicities toward various organisms, this study clearly suggests that this type of QSAR can be readily extended to include other organometal systems, provided that there is no solubility problem and the toxicity is a function of the hydrophobicity of the organometal compounds.     

On new forms of motive differential equations of a mechanical system relative to non-inertial frame

Based on D'Alembert's principle of a mechanical system relative to non-inertial frame and by introducing the concept of the generalized inertial potential, new forms of differential equations of motion of a mechanical system with holonomic and the non-holonomic constraints relative to the non-inertial frame are obtained. The merits and demerits between our method and the Newtonian dynamic method as well as the analytic dynamic method are discussed comparatively. Finally, two examples are given to illustrate the application of the motive differential equations in the new forms.     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

Stereoselective synthesis of cis-p-menth-8-ene-1,7-diol, cis-p-menthane-1,7-diol, and cis-p-menthane-1,7,8-triol

The natural products cis-p-menthane-1,7-diol (cis-IV), cis-p-menth-8-ene-1,7-diol (cis-I) and cis-p-menthane-1,7,8-triol (cis-II) are obtained starting from the corresponding cis-cyanohydrins, cis-2 and cis-7, respectively, by chemical transformation of the cyano into the hydroxymethyl group. The key step of the synthesis is the very high cis-selectivity (> or = 96 %) of the MeHNL-catalyzed HCN addition to 4-alkylcyclohexanones. From 4-isopropylcyclohexanone (1) the cyanohydrin cis-2 and from 4-(1-methylvinyl)cyclohexanone (6) the cyanohydrin cis-7 result almost quantitatively. Regioselective hydroxylation of cis-I affords the triol cis-II. X-ray crystal structure determinations of the final products confirm their cis-configuration.     

APPLICATION OF MSW-X_α METHOD WITH OVERLAPPING ATOMIC-SPHERE TO IONIZATION POTENTIALS FOR SOME PLANAR ORGANIC MOLECULES

Application of multiple scattered-wave X_α method with overlapping atomic-sphere to ionization potentials is reported for benzene, pyridine, pyrazine, pyrrole and imidazole. The calculated results show that the orbital charges in the intersphere region are non-negative and the energy levels get improvements in orderings.     

Potential distribution around a charged spherical colloidal particle in a medium containing its counterions and a small amount of added salts

A theory is developed for the potential distribution around a charged spherical colloidal particle carrying ionized groups on the particle surface in a medium containing its counterions (i.e., counterions produced from dissociation of the particle surface groups) and a small amount of added salts on the basis of the theory of Imai and Oosawa. Numerical solutions to the Poisson–Boltzmann equation for the potential distribution are obtained for the case of dilute (but not infinitely dilute) particle suspensions of volume fraction 1 for a1 (where is the Debye–Hückel parameter and a is the particle radius). Here we have taken into account the effects of (i) counterions from the particle surface groups, and (ii) the finite particle volume fraction. These effects, which are usually neglected in the conventional Poisson–Boltzmann equation, are found to be important. It is found that, as in the case of completely salt-free media, there is a certain critical value of the particle charge (which is the same as that for the completely salt-free case). When the particle charge is lower than the critical value, the potential is given by a Coulomb potential. If the particle charge is higher than the critical value, then counterions are accumulated in the vicinity of the particle surface (counterion condensation) and the potential becomes less dependent on the particle charge. The above behaviors can be observed even for the case where the electrolyte concentration is higher than the concentration of counterions from the particle surface groups, if the conditions 1 and a1are both satisfied.     

The electrostatic field of B-DNA

The electrostatic field associated with one complete turn of B-DNA is presented. Two base sequences poly (dG) · poly (dC) and poly (dA) · poly (dT) are studied and the effects of sodium counterions bound to the nucleic acid are investigated. The contrasts between the electrostatic potential and the electrostatic field of the macromolecules are discussed and the possible applications of the field are considered.     

Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.