Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

Al12N、Al12B团簇结构和电子性质的密度泛函计算

利用密度泛函理论研究了Al12N和Al12B团簇的原子结构和电子性质,通过各种异构体的比较,发现两种掺杂团簇的最低能量结构都是完好的二十面体(Ih)结构,N(B)原子占据在二十面体的中心.高对称性团簇形成稀疏离散的电子态密度和大的电子能隙.在Al-N之间发生较大的电荷转移.因此我们建议把Al12N团簇看作是碱金属超原子,Al12B团簇看作是卤素超原子,用来构造团簇组装固体.     

Low-temperature property investigation of the lead indium-niobate-lead nickel-niobate solid solution

The complex perovskite solid solution (1−x) Pb(In_1/2Nb_1/2)O₃-(x) Pb(Ni_1/3Nb_2/3)O₃ has been successfully prepared by the Columbite precursor method. The temperature dependencies of the dielectric constant and pyroelectric coefficient were measured between −261 and 200 °C. Relaxor ferroelectric behavior has been noticed in all compositions across the solid solution. The room-temperature electrostrictive coefficient, Q₃₃, was 1.83×10⁻² C²/m⁴ for x=0.10. No room-temperature piezoelectric activity was detected; however, upon cooling to −261 °C the maximum coupling coefficients k_p=29%, k_t=11%, and k₃₃=31% were observed for the composition x=1.00.     

A high-pressure Raman and X-ray diffraction study of the perovskite SrCeO3

A high-pressure structural study of SrCeO₃ has been performed at room temperature by Raman spectroscopy and X-ray diffraction up to 32 and 45 GPa, respectively. A first-order reversible phase transition is observed at about 12 GPa in both techniques. A second weak structural change, taking place between 18 and 25 GPa, can be suspected from Raman data. The increase in the number of Raman bands and diffraction lines is an indication that the symmetry is lowered and the compound does not evolve towards the ideal cubic perovskite structure. A Rietveld analysis of X-ray data was performed for the low-pressure phase and the atomic positions and the cell lattice parameters variations are reported in this paper. The volume compressibility derived from Raman modes (5.6×10⁻¹² Pa⁻¹), involving mainly bond-stretching for each type of polyhedron, is found to be close to the one obtained from volume cell variations measured by X-ray diffraction (7.9×10⁻¹² Pa⁻¹).     

Elastic and Thermophysical Properties of Poly(Vinyl Chloride) and Chlorinated Polyethylene Blends

The results of experimental and theoretical investigations of elastic and thermophysical properties of poly(vinyl chloride) (PVC) and chlorinated polyethylene (CPE) blends are presented. Eight types of specimens with different ratios of weight contents of PVC and CPE (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) were tested. The effect of blend composition on the elastic constants (tensile and shear modulus) is discussed. The data on the thermal conductivity, thermal diffusivity, and heat capacity of the blends investigated are also presented.     

Preliminary results of a non-spherical aerosol method for the retrieval of the atmospheric aerosol optical properties

There is experimental evidence that the non-sphericity of certain atmospheric particles can cause scattering properties different from those predicted by standard Mie theory. Numerous studies indicate the need to consider the presence of non-spherical particles in modeling the optical properties of atmospheric aerosols. On the other hand, natural aerosols show a great variety of shapes, making difficult a realistic choice of a particle shape (or shape mixture) model. In this paper, we test a parameterization of the particle shape in the retrieval of size distribution, phase function, single scattering albedo and asymmetry parameter from direct and sky-radiance measurements. For this purpose we have substituted the Kernel based on the Mie theory included in the model SKYRAD.PACK by one derived for non-spherical particles. The method is applied under different atmospheric conditions, including Saharan dust outbreak, polluted and local mineral episodes. We compare the results with those obtained by the well known spheroids algorithm used in the AERONET network.     

Transport coefficients and defect structure of Sb2−xAgxTe3 single crystals

Incorporation of Ag in the crystal lattice of Sb₂Te₃ creates structural defects that have a strong influence on the transport properties. Single crystals of Sb_2−xAg_xTe₃ (x=0.0; 0.014; 0.018 and 0.022) were characterized by measurements of the temperature dependence of the electrical resistivity, Hall coefficient, Seebeck coefficient and thermal conductivity in the temperature range of 5-300 K. With an increasing content of Ag the electrical resistance, the Hall coefficient and the Seebeck coefficient all decrease. This implies that the incorporation of Ag atoms in the Sb₂Te₃ crystal structure results in an increasing concentration of holes. However, the doping efficiency of Ag appears to be only about 50% of the expected value. We explain this discrepancy by a model based on the interaction of Ag impurity with the native defects in the Sb_2−xAg_xTe₃ crystal lattice. Defects have a particularly strong influence on the thermal conductivity. We analyze the temperature dependence of the lattice thermal conductivity in the context of the Debye model. Of the various phonon scattering contributions, the dominant influence of Ag incorporation in the crystal lattice of Sb₂Te₃ is revealed to be point-defect scattering where both the mass defect and elastic strain play a pivotal role.     

Density Correlations in the Two-Dimensional Coulomb Gas

We consider a two-dimensional Coulomb gas of positive and negative pointlike unit charges interacting via a logarithmic potential. The density (rather than the charge) correlation functions are studied. In the bulk, the form-factor theory of an equivalent sine-Gordon model is used to determine the density correlation length. At the surface of a rectilinear plain wall, the universality of the asymptotic behavior of the density correlations is suggested. A scaling analysis implies a local form of the compressibility sum rule near a hard wall. A symmetry of the Coulomb system with respect to the Möbius conformal transformation, which induces a gravitational source acting on the particle density, is established. Among the consequences, a universal term of the finite-size expansion of the grand potential is derived exactly for a disk geometry of the confining domain.     

Amorphous Fe–Mg alloy thin films: magnetic properties and atomic vibrational dynamics

Amorphous (a-) Fe _x Mg_1?x alloys are interesting materials for the investigation of non-Debye-like low-energy vibrational excitations. We have prepared a-Fe _x Mg_1?x alloy thin films (0.3 ≤ × ≤0.7) by vapour quenching. The amorphous state was confirmed by conversion electron Mössbauer spectroscopy between 4.2–300 K, and the x- and temperature-dependence of the isomer shift and hyperfine magnetic field was measured. For x= 0.6 and 0.7, magnetic ordering occurs below ~150 K. The atomic vibrational density of states, g(E), was determined by nuclear resonant inelastic scattering, providing clear evidence for the non-Debye-like low-energy vibrational excitations.     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.