STUDIES ON THE POLYMERIZATION OF ACRYLONITRILE INITIATED BY METAVANADATE-CONTAININ G ANION EXCHANGER-THIOUREA REDOX SYSTEM

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by metavanadate-containing anion exchange resin (PV)-thiourea (TU) redox system at 20—40℃. has been investigated. The overall rate of polymerization (R_p) is given byR_p=1.92×10~4e~(-6.860/RT) [AN]~(1.2) [PV]~(0.44) [TU]~(1.0)[HNO_3]~(1.0)The kinetic parameters differed from those of V~(5+)-TU system indicated that the generation of the primary radicals is mainly a difffusion-controlled reaction. The effect of macromolecular field arisen from the polymer matrix exerts a great influence on the polymerization process.     

Complex copper(II) fluorides. XV. The Ternary System BaF2?CuF2?ScF3

The liquid-solid phase diagram of the binary system BaF₂? ScF₃ is established by D.T.A. and radiocrystallography. Three fluorides are disclosed: Ba₃Sc₂F₁₂, Ba₅Sc₃F₁₉ and a cubic high temperature phase Ba_1?xSc_xF_2+x (x = 0.17), the structure of which derives from that of BaF₂. A solid solution between BaF₂ and ScF₃ is also evidenced at high temperature. The ternary system BaF₂? CuF₂? ScF₃ is investigated by radiocrystallography and an isothermal section at 670°C is given. It shows the existence of four phases: a complex quaternary fluoride Ba₁₀Cu₁₂ScF₄₇, two “polytypic” phases the structure of which derives from that of BaCuF₄ and a tetragonal solid solution Ba₅Sc_3?xCu_xF_19?x with 0 ≤ x ≤ 1.     

The use of the DPE radical polymerization method for the synthesis of chromophore-labelled polymers and block copolymers

Two analogues of diphenylethene carrying phenanthrene (1-(9-phenanthryl)-1-phenylethene (PPE)) and anthracene (1-(2-anthryl)-1-phenylethene (APE)) units were used in radical polymerization of styrene (St) and methyl methacrylate (MMA) at 80 °C using AIBN as initiator. Because of the nature of the polymerization, the resulting polymers possess the corresponding chromophoric groups. Using the methodology of a DPE system, these labelled polymers were further used for the synthesis of block copolymers. In this way poly(methyl methacrylate)-b-poly(styrene) and poly(methyl methacrylate)-b-poly(acrylonitrile) with molar masses of 60,000-90,000 g/mol were synthesized. Incorporation of the chromophoric groups into both homo- and block copolymers was confirmed by spectral measurements.     

Relationship between the density of supercritical CO<Subscript>2</Subscript> + ethanol binary system and its critical properties

The dependent relation between temperature and pressure of supercritical CO₂+ ethanol binary system under the pressure range from 5 to 10 MPa with the variety of densities and mole fractions of ethanol that range from 0 to 2% was investigated by the static visual method in a constant volume. The critical temperature and pressure were experimentally determined simultaneously. The PTρ figures at different ethanol contents were described based on the determined pressure and temperature data, from which pressure of supercritical CO₂ + ethanol binary system was found to increase linearly with the increasing temperature. P-T lines show certain convergent feature in a specific concentration of ethanol and the convergent points shift to the region of higher temperature and pressure with the increasing ethanol compositions. Furthermore, the effect of density and ethanol concentration on the critical point of CO₂ + ethanol binary system was discussed in details. Critical points increase linearly with the increasing mole fraction of ethanol in specific density and critical points change at different densities. The critical compressibility factors Z_c of supercritical CO₂ + ethanol binary systems at different compositions of ethanol were calculated and Z _c -ρ figure was obtained accordingly. It was found from Z _c -ρ figure that critical compressibility factors of supercritical CO₂ unitary or binary systems decline linearly with the increasing density, by which the critical point can be predicted precisely.     

Computer simulation of electron transfer processes across the electrode|electrolyte interface: a treatment of solvent and electrode polarizability

A polarizable molecular dynamics model for adiabatic electron transfer across the electrode|electrolyte interface is presented. The electronic polarizability of the water and of the metal electrode is accounted for by a dynamical fluctuating charge algorithm, image charges, and the Ewald summation adapted for a conducting interface. The effects of the solvent electronic polarizability are studied by computing the diabatic and adiabatic free energy curves for both polarizable and non-polarizable water models. This represents the first effort to compute the adiabatic free energy curves from simulation for a fully polarizable electrochemical system.     

A facile access to ureido sugars. Synthesis of urea-bridged β-cyclodextrins

The preparation of a urea-bridged β-cyclodextrin dimer and of a 6-monodeoxy-6-mono[3-(β-d-glucopyranos-2-yl)ureido]-β-cyclodextrin has been developed, using triphosgene as the isocyanation agent in an aqueous two-phase system. Per-O-acetylated β-d-gluco and mannopyranosylamines and 2-amino-2-deoxy-α- and β-d-glucose were also transformed into the corresponding isocyanates and converted in situ into ureas by coupling with aromatic and aliphatic amines.     

Factor Xa: Simulation studies with an eye to inhibitor design

Factor Xa is a serine protease which activates thrombin and plays a key regulatory role in the blood-coagulation cascade. Factor Xa is at the crossroads of the extrinsic and intrinsic pathways of coagulation and, hence, has become an important target for the design of anti-thrombotics (inhibitors). It is not known to be involved in other processes than hemostasis and its binding site is different to that of other serine proteases, thus facilitating selective inhibition. The design of high-affinity selective inhibitors of factor Xa requires knowledge of the structural and dynamical characteristics of its active site. The three-dimensional structure of factor Xa was resolved by X-ray crystallography and refined at 2.2 Å resolution by Padmanabhan and collaborators. In this article we present results from molecular dynamics simulations of the catalytic domain of factor Xa in aqueous solution. The simulations were performed to characterise the mobility and flexibility of the residues delimiting the unoccupied binding site of the enzyme, and to determine hydrogen bonding propensities (with protein and with solvent atoms) of those residues in the active site that could interact with a substrate or a potential inhibitor. The simulation data is aimed at facilitating the design of high-affinity selective inhibitors of factor Xa.     

Mechanism for the inhibition of the acid degradation of ampicillin by 2-hydroxypropyl- β -cyclodextrin

The formation of inclusion complexes between amoxicillin (AMPC) and 2-hydroxypropyl-β-cyclodextrin (HPCD) was investigated by isothermal microcalorimetry and molecular dynamics simulation to evaluate the inhibitory effects on the degradation of AMPC in aqueous solutions at various pH. The process depended significantly on the ionic species of AMPC in the solution. In a strong acid solution, cationic AMPC and HPCD formed two different types of inclusion complexes with a 1:1 stoichiometry: the first-type had a high association constant K ₁ of 4.0-8.0·10³ M^-1 and included the penam ring of AMPC in the HPCD cavity (Mode I), while the second-type with a K ₂ of 1.0·10³ M^-1 contained the phenyl group of AMPC (Mode II). Furthermore, a complex with a 1:2 (AMPC:HPCD) stoichiometry was realized in a two-step reaction and was characterized by a smaller K _1:2of 4.0·10² M^-1 and larger negative enthalpy and entropy changes than the complexes with a 1:1 stoichiometry. Since the β-lactam ring of AMPC could be protected by inclusion with HPCD in the 1:2 complex and Mode I of 1:1 complexes, the degradation of AMPC in the presence of HPCD was approximately four times slower than in its absence at pH 1.2 and 37°C. In weak acid and neutral solutions, zwitterionic AMPC and HPCD formed only one type of inclusion complex with a 1:1 stoichiometry, where the phenyl group was included (Mode II). AMPC was very stable in these solutions (t _1/2=226 h at pH=6.0) and there is little significant difference in the degradation rate between complexed AMPC and uncomplexed AMPC. Thus, the results indicated that the inclusion complex of AMPC with HPCD, effectively increasing the stability of AMPC in a strong acidic solution like that the stomach, would be useful for eradicating Helicobacter pylori infection and as a drug delivery system. This revised version was published online in July 2006 with corrections to the Cover Date.     

On-line determination of manganese in solid seafood samples by flame atomic absorption spectrometry

Manganese is extracted on-line from solid seafood samples by a simple continuous ultrasound-assisted extraction system (CUES). This system is connected to an on-line manifold, which permits the flow-injection flame atomic absorption spectrometric determination of manganese. Optimisation of the continuous leaching procedure is performed by an experimental design. The proposed method allows the determination of manganese with a relative standard deviation of 0.9% for a sample containing 23.4 μg g⁻¹ manganese (dry mass). The detection limit is 0.4 μg g⁻¹ (dry mass) for 30 mg of sample and the sample throughput is ca. 60 samples per hour. Accurate results are obtained by measuring TORT-1 certified reference material. The procedure is finally applied to mussel, tuna, sardine and clams samples.