Numerical calculations of temperature distribution of double layer metallic surface treated by laser beams

A mathematical model of laser beam treatment of double layer alloys (Ni/Fe, Al/Fe and Cr/Fe systems) describing the effect of laser beam on different physical and geometrical parameters of coated layer system has been adapted. The numerical solutions of the non-homogeneous heat-transport differential equation could estimate the temperature of the treated region.The suggested model allows investigation of the temperature distribution as a function of treated surface and laser parameters. The physical parameters of the treated materials were taken as functions of temperature due to the change in the temperature of the treated double layer materials.     

2‐connected 7‐coverings of 3‐connected graphs on surfaces

An m‐covering of a graph G is a spanning subgraph of G with maximum degree at most m. In this paper, we shall show that every 3‐connected graph on a surface with Euler genus k ≥ 2 with sufficiently large representativity has a 2‐connected 7‐covering with at most 6k ? 12 vertices of degree 7. We also construct, for every surface F² with Euler genus k ≥ 2, a 3‐connected graph G on F² with arbitrarily large representativity each of whose 2‐connected 7‐coverings contains at least 6k ? 12 vertices of degree 7. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 26–36, 2003     

Standardization of Methods for Characterizing the Surface Geometry of Solids

Since a comprehensive survey published in 1999 [1] much work was done in standardizing measuring methods to characterize the surface geometry of dispersed and/or porous solids and to certify reference materials. The present paper is an extension of a short communication [2]. It gives a survey on existing standards and reports on new drafts and proposals.     

Unsaturated bond existing in tetrafluoroethylene-propylene-vinylidene fluoride terpolymer

Infrared and nuclear magnetic resonance (NMR) spectroscopies have been applied for quantitative comparison on unsaturated bonds in tetrafluoroethylene (TFE)-propylene (P)-vinylidene fluoride (VdF) terpolymers. These spectroscopies have led to consistent results while they are based on completely different principles. It is shown that the absolute concentration can be evaluated from NMR measurements. The behavior of unsaturation has been discussed in terms of after-treatment such as wet and dry treatments. The result obtained here can give the important information to improve the performance of fluoroelastomer based on TFE-P-VdF terpolymers.     

用改进嵌入原子法计算Cu晶体的表面能

用改进嵌入原子法(MEAM)计算了Cu晶体12个晶面的表面能.结果表明，密排面(111)的表面能最小.其他晶面的表面能随其晶面与(111)晶面夹角的增加而增加，据此可以粗略地估计各晶面表面能的相对大小.给出的几何结构因子的确定方法及结果可以直接用于计算其他面心立方晶体的表面能及其他特性.在Cu,Ag等面心立方薄膜中出现(111)择优取向或织构的机理是表面能的最小化. 关键词： 改进嵌入原子法 铜 表面能 计算     

Microstructure and high-temperature wear resistance of a laser surface alloyed γ-TiAl with carbon

TiC reinforced composite coating on γ-TiAl alloy was successfully fabricated by laser surface alloying with carbon. The fine TiC reinforcing phase had a gradient distribution in the coating, and its growth morphology of TiC in laser surface alloyed coating was in unique faceted platelet-like. The composite coating exhibited high hardness and excellent high-temperature sliding wear resistance.     

向列液晶表面弹性能K13项的物理效应及检验方法

通过解析推导和数值计算的方法，得到了平衡态指向矢满足的微分方程和边界条件.研究了表面弹性能K13项对磁场作用下的弱锚定向列液晶盒Fréedericksz转变性质的影响.结果表明，表面弹性能K13项的存在对液晶系统的自由能有很大的影响，从而改变转变的性质，诱导液晶盒在阈值点发生一级Fréedericksz转变.给出了发生一级转变的物理条件，它除了与液晶的结构和材料有关外，还依赖于液晶表面弹性能K13项，同时给出了由此判断K13项是否存在的检验方法. 关键词： 表面弹性能K13项 弱锚定 Fréedericksz转变     

用电磁打点计时器进行受迫振动实验--介绍我校的一个自学物理实验

介绍一种用简单的方法进行的受迫振动实验。     

Compact Kähler Surfaces with Trivial Canonical Bundle

The classical conjectures of Weil on K3 surfaces – that the set of suchsurfaces is connected; that a version of the Torelli theorem holds; thateach such surface is Kähler; and that the period map issurjective – are reconsidered in the light of a generalisation of theNakai–Moishezon criterion, and short proofs of all the conjectures aregiven. Most of the proofs apply equally or with minor variation tocomplex 2-tori, the only other compact Kähler surfaces with trivialcanonical bundle.     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.