ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

用氯离子电极同时测定阳离子表面活性剂的CMC及反离子缔合度

临界胶束浓度(CMC)是研究表面活性剂的一个重要参数,胶束的反离子缔合度(K)是重要的特性参数。本文以阳离子表面活性剂十烷基三甲基氯化铵(DTMAC)、十二烷基三甲基氯化铵(DTAC)、十四烷基三甲基氯化铵(TTAC)、十六烷基三甲基氯化铵(CTAC)和十八烷基三甲基氯化铵(OTAC)水溶液体系为研究对象,用氯离子选择电极分别测定了其水溶液体系胶束的CMC和K。     

Adsorption separation performance of H2/CH4 on ETS-4 by concentration pulse chromatography

To exploit an effective adsorbent to separate hydrogen and methane, microporous titanium silicate molecular sieve NaETS-4 was synthesized and modified by strontium. The adsorption characteristics and diffusion behaviors of the prepared titanosilicate molecular sieve were studied by concentration pulse chromatography. And the effects of ion-exchange and dehydration temperature on adsorbent structure and gas diffusion were also discussed. The results showed that the thermal stability and Henry＇s Law constants were enhanced and micropore diffusivity decreased after exchanging Na＋ with Sr2＋. With the increase of dehydration temperature, Henry＇s Law constant and micropore diffusivity of CI-I4 decreased in both NaETS-4 and SrETS-4. While for 1-12 in SrETS-4, the increase of Henry＇s Law constant and the decrease of diffusion rate can be attributed to the shrinks of pore diameter resulting from the relocation of Sr2＋. Correspondingly, the kinetic selectivity of H2/CH4 reached 8.91 indicating its potentiality in separating H2 and CH4.     

电渗流与缓冲液浓度之间数学关系的线性表达

It was believed that electroosmotic mobility μeo is inversely proportional to the square root of the ionic strength L But the linear relationship for regression analysis was expressed differently in different papers. The paper studied the linear expression of the mathematical relationship between μeo and c （background buffer concentration） by mathematical transform and real experimental data.μeo values of fused silica capillary were determined in four buffer systems. Their experimental conditions were controlled carefully for decreasing temperature difference AT and pH difference ApH in 50 μm ID capillary, in which no double layer overlap existed. The linear relationship between the reciprocal of electroosmotic mobility and the square root of concentration （or ionic strength） was derived by mathematical method. The regression analysis of experimental data was shown to well correspond to the relationship. The constants in regression equation could be well defined and the calculated results were acceptable.     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.     

Multivariate comparison of concentration profiles in materials analysis

Hierarchical cluster analysis (HCA) and principal components analysis (PCA) were applied to find groups between similar depth-profiles in thin-layers investigated by Rutherford backscattering spectrometry (RBS).HCA yields in one run an objective hierarchy of similarity for several profiles. Among the similarity coefficients examined the linear measure, the Euclidean distance and the exponential measure respond with different sensitivity to overall shifts in direction of the concentration axis, whereas the correlation measure relates to parallelism of the profiles.For agglomerative HCA with Euclidean distance, a lowest significant linkage level has been defined by use of Fisher'sF-test. For divisive HCA based also on Euclidean distance, the maximum of a separating function marks the most separating cluster step. The outcomes of both proposals agree for the data set investigated.PCA is useful for verifying the results of HCA and yields additional information about the data structure. In the actual example quite different positions of features (concentrations at definite depths) in the space of the two first principal components hint at peculiarities during the metallurgical coating process.     

Objective comparison of concentration profiles in solids by means of mathematical statistics

To compare concentration profiles in solids in an objective manner, a multi-dimensional generalization of the comparison of two means by Student'st-test is proposed. The approach is based on piecewise modelling the profiles using rougha priori information, estimating the model parameters and their covariance matrix and comparing the estimated parameters by use of multidimensional test variables. The piecewise modelling is treated in the most important cases in such a way that the partial functions are straight lines or cubic polynoms (splines) with continuity at all knots in each case. It enables us to compare whole profiles as well as the most relevant parts of them. Two ways of estimating the covariance matrix as a generalization of the variance estimation are discussed. The approach is useful for any kind of line profiles if rough information on the profile type is available. As an example SIMS depth-profiles of aluminum obtained from thin-layer systems after different technological heat treatments are considered. These profiles are modeled by three straight lines.     

吸附伏安法测定表面活性剂的临界胶束浓度

以易溶于有机溶剂，微溶于水的氧化－还原指示剂中性红为探针，用吸附伏安法测定了阴离子表面活性剂的临界胶束浓度。测量的基本原理是：存在于表面活性剂溶液中的微量中性红在悬汞电极上的吸附伏安峰电流对表面活性剂浓度的曲线在临界胶束浓度处有一拐点。     

Isoperichoric focusing field-flow fractionation and thin layer isoperichoric focusing based on coupling of gradient generated by primary field with secondary field action: general principles and performances

The primary field forces can generate spatially oriented gradient of the effective property of a continuum or pseudo-continuum fluid (carrier liquid). When this gradient is coupled with the action of a secondary field of identical or different nature the isoperichoric focused zones of the dispersed species can appear. Consequently, they can be separated according to differences responding to the property gradient of the carrier liquid. This concept can be applied under static (non-flow) conditions in thin layer focusing as well as under dynamic conditions with the elution due to the carrier liquid flow in focusing field-flow fractionation. The gradient established by the action of the primary field and the concentration distribution of the isoperichoric focused zone formed by the coupled effect of the gradient and of the primary or secondary field are described theoretically. The rigorous relationship describing the shape of the focused zone is compared with the approximate solutions. The performances of the proposed principle were evaluated by model calculations. Potential experimental configurations considering the implementation of the static and dynamic conditions are discussed. The generalized isoperichoric focusing theory can be applied to describe the particular processes operating in analytical and preparative focusing separations of the particles of various, but especially of biological origin.     

Scattering of Laser Light from Mixed Micelles

Dynamic and static scattering of light was employed to investigate mixed micelles of two homologous anionic surfactants-sodium octyl sulfate and sodium hexadecyl sulfate, above the phase boundary temperature and critical micelle concentrations (cmc). The results indicate that the mixed micelles change from prolate to sphcrical as the molar ratio SOS/SHS increases from 1 to 8. Below 1 or above 8, the formation of micelles is due to one surfactant dissolving the other.