基于ANSYS的芯片冷却器传热分析

针对微槽式芯片冷却器,建立三维仿真模型,分析其稳态工况下的传热情况,获得其温度和热应力分布.分析了五种不同结构形式芯片冷却器工作性能的影响,比较了纯铜和氮化硅复合物两种材质对散热性能的影响.结果表明,铜质冷却器散热性能较好,但内部热应力却高于复合材质冷却器.通过将原冷却通道分割成两个相同的小通道,可提高冷却性能,且应将...     

Laser cutting of steel and thermal stress development

In laser cutting of sheet metals, thermal stresses are developed in the region of the cutting section. Depending on the cutting conditions and substrate material properties, the thermal stress levels can attain high values. In the present study, thermal stress developed in the region of the laser cut edges is modeled and temperature as well as stress fields are predicted. Temperature predictions are validated through the experimental results. It was found that the temporal variation of the maximum temperature along y-axis follows the laser heating source. However, temporal variation of von-Mises stress deviates slightly from the temporal variation of temperature along the cutting direction. Increase in scanning speed enhances the von-Mises stress levels due to the attainment of high temperature gradients in the substrate material.     

Effects of initial crystal size of diamond powder on surface residual stress and morphology in polycrystalline diamond (PCD) layer

Polycrystalline diamond compacts (PDC) were synthesized using diamond powder of average crystal size 3-20 μm by the Ni 70 Mn 25 Co 5 alloy infiltration technique at high temperature and high pressure (HPHT).The surface residual stress of polycrystalline diamond (PCD) layer was measured using micro-Raman spectroscopy with hydrostatic stress model and X-ray diffraction (XRD).Measurements of the stress levels of PCDs show that the residual compressive stresses range from 0.12 to 0.22 GPa,which increase with th...     

High nonlinearities in Langevin transducer: a comprehensive model

The design and simulation of power transducers are difficult since piezoelectric, dielectric and elastic properties of ferroelectric materials differ from linear behavior when driven at large levels. This paper is devoted to modeling of a resonant power transducer at a high level of dynamic mechanical stress. The power transducer is subjected to a sine electrical field E of varying frequency which was considered as the excitation of the transducer.The mechanical equation of the piezoelectric element is written using electrostriction. The dielectric part is written as a nonlinear function of an equivalent electric field including stress influence (scaling relationship between electric field and mechanical stress). Using various simulations, we show then that typical resonance nonlinearities are obtained, such as jump phenomenon of transducer speed amplitude and phase, resonance peak that become asymmetric, and diminution of mechanical quality factor. As a consequence, we state that those typical nonlinearities are only due to dielectric nonlinearities, in good correlation with typical ferroelectric behavior. Moreover, this demonstrates the usefulness of scaling relationships in ferroelectrics, which explain static depoling under stress and butterfly strain hysteresis loop. The same scaling law gives here several nonlinearities for resonant transducers as well.     

Oscillatory zoning caused by oscillating surface relaxations

Oscillatory zoning is a spatial variation in the composition of minerals. It has been observed in many different minerals and a variety of mechanisms have been proposed to explain it. We propose an equilibrium model of oscillatory zoning in which the variations in composition stabilise a ferroelastic phase. This results in a sinusoidal variation in composition. We expect that this mechanism could account for oscillatory zoning found in minerals with oscillatory surface relaxations. Received 9 March 1999     

New strain standards for glass-ware stress photoelastic evaluation

Strain viewers are used for residual strain evaluation and assessment of glassware. Most viewers are the crossed-nicol type photoelastic apparatus with tint plates, in which the tint colour in the field of view changes with the insertion of strained glassware. Strain standards, which give known or predetermined optical path differences, are necessary for qualitative evaluation of residual internal stress in glassware. Two types of new strain standards, namely rotary-plate type and film-array type, are proposed and presented in detail.     

杨氏模量用电学量转换测量的设计

本文在传统的力学量测定的实验基础上,利用电学量参数变化测定杨氏模量,达到研究应力与应变的规律。     

Elastic-plastic analyses on the residual stresses and curvature of the film/substrate bilayer system

During thermal cycling, the residual stresses are often generated in the film/substrate bilayer due to the material mismatch between the substrate and the film. If the thickness of the film is relatively high, the thermal residual stresses in it may be of different signs. When the film is subjected to elastic-plastic deformation, two plastic zones with different thicknesses may be generated in the film at a significantly high temperature difference. In this paper, a theoretical model which reflects the complete history of thermal residual stresses and curvatures in the elastoplastic film/substrate bilayer system is developed. Solutions are derived to estimate the residual stresses and curvature in the film as functions of temperature difference. The case of Al/Si system is used to illustrate the implementation of this model. Results show that the critical temperature difference at which the second plastic zone near the film surface is generated near the Al film surface is dependent on the film thickness. The strain hardening of the film has an obvious influence on the magnitude of residual stresses within the film at high temperature difference.     

Analysis of film strain and stress in a film-substrate cantilever system

The bending problem of a magnetic film-nonmagnetic substrate cantilever system is studied by using the principle of energy minimization. Emphasis is placed on the analysis of geometrical and physical parameter dependence of the neutral plane, internal film stress and strain of the cantilever system, and then the influence of such a parameter on the bending characteristic is presented. The results indicate, owing to the anisotropic expanding feature of the magnetostriction, that the neutral plane is generally anisotropic, and moves downwards rapidly with the increasing thickness ratio. Meanwhile, the bounding rigidity of substrate on the film will decrease with the increasing thickness ratio, and thus release the film stress, i.e., it decreases, but the film strain increases. The effect of Poisson’s ratio of the materials on the film strain, the stress and the neutral plane in the direction transverse to the magnetization is prominent. For the strain and the stress in the magnetization, however, the role of Poisson’s ratio is inconspicuous. This property is due to the initiative elongating (or contracting) feature of the magnetic film along its magnetization. Supported by the National Natural Science Foundation of China (Grant No. 10762001), the Key Project of the Chinese Ministry of Education (Grant No. 206024), and the Program for New Century Excellent Talents in University of China (Grant No. NCET-2005-0272)