FTO客体3m闪光照相的Monte Carlo研究

 研究了客体模型FTO的闪光照相系统X光输运过程，给出了直穿照射量、散射照射量、直散比、直穿照射量能谱、散射照射量能谱、直穿X光通量能谱和散射X光通量能谱在记录平面的空间分布。结果表明：后锥是照射量散射成分的主要来源，后锥照射量占总散射量97%；后锥也是造成散射的空间分布不均匀的主要器件，这一不均匀性高达58%。照相系统的最小直散比非常小，表明锥造成的散射已经严重地淹没了直穿（轫致辐射）信号。计算中使用高空间分辨率记录法进行分点，合成图像对吸收系数的复原结果与国外报道的结果相符。     

Accelerated quasicontinuum: a practical perspective on hyper-QC with application to nanoindentation

Abstract

Hyper-QC is a multiscale method based on the quasicontinuum (QC) method in which time is accelerated using hyperdynamics through the addition of a suitable bias potential. This paper describes the practical details of implementing and carrying out hyper-QC simulations and introduces a novel mechanism-based bias potential for deformation processes in face-centred cubic (fcc) systems. The factors limiting the maximum achievable acceleration are discussed. The method is demonstrated for nanoindentation into a thin film of single crystal fcc nickel at near experimental loading rates. Speed up factors as high as 10,000 are achieved. The simulations reveal a thermally activated dislocation nucleation mechanism with a logarithmic dependence on temperature and indenter velocity in agreement with a theoretical model.     

Efcient Multipartite Polarization Entanglement Distribution Over Arbitrary Noise Channel

We present an efcient faithful multipartite polarization entanglement distribution protocol over an arbitrary noisy channel.The spatial degree of freedom is used to carry the entanglement during the transmission.We describe the principle by distributing n-qubit Greenberge–Horne–Zeilinger state and n-qubit W state.Our scheme can be used to distribute arbitrary n-qubit entangled states to n distant locations.The remote parties can obtain maximally entangled states deterministically on the polarization of photons.Only passive linear optics are employed in our setup,which makes our scheme more feasible and efcient for practical application in long distance quantum communication.     

Unsupervised cell identification on multidimensional X‐ray fluorescence datasets

A novel approach to locate, identify and refine positions and whole areas of cell structures based on elemental contents measured by X‐ray fluorescence microscopy is introduced. It is shown that, by initializing with only a handful of prototypical cell regions, this approach can obtain consistent identification of whole cells, even when cells are overlapping, without training by explicit annotation. It is robust both to different measurements on the same sample and to different initializations. This effort provides a versatile framework to identify targeted cellular structures from datasets too complex for manual analysis, like most X‐ray fluorescence microscopy data. Possible future extensions are also discussed.     

EFFECT OF FORESTLAND AVAILABILITY BY OWNERSHIP TYPE ON LICENSE SALES FOR HUNTING: A SPATIAL APPROACH

Abstract The effect of forestland availability under different ownership types on license sales for hunting in nine Southeastern states is empirically evaluated. An equation that represents license sales for hunting is estimated assuming the sale of hunting licenses in a particular county is related to the characteristics of that county as well as the characteristics and license sales for hunting in its neighboring counties. The positive effects of the amounts of both national and private forestland on license sales reaffirm the potential benefits of maintaining forestland to stimulate hunting. The positive spillover effect of national forests on license sales for hunting suggests that availability and close access to hunting in national forests within neighboring counties are important in supporting hunting license sales in a county. This study contributes to the general understanding of the drivers affecting individuals’ decisions to use natural resources for hunting. Advances in natural resource modeling, specifically the spatial process model and geospatial data used in this research, make it possible to examine the interactions between the spatial dynamics and ownership attributes of the natural system, allowing policy makers to design natural resource management practices that respond to a system characterized by these interactions.     

Coupled Navier–Stokes/molecular dynamics simulations in nonperiodic domains based on particle forcing

This paper focuses on coupling methods for hybrid Navier–Stokes/molecular dynamics (MD) simulations. The computational domain is split in a continuum flow region, where a finite‐volume discretisation of the Navier–Stokes equations is used, and one or more particle domains, where molecular level modelling of the flow is employed. The domains are defined with a partial overlap, in which the flow states are coupled through an exchange of the velocity components. For the steady flows considered, an under‐relaxed Newton iteration method is used to drive the coupled system to convergence. The main focus of the present work is on methods to impose nonperiodic boundary conditions on the particle domain(s). A particle forcing is applied in the direction normal to the particle domain boundary to impose the boundary normal velocity component. A novel aspect of the present work is the extension of this method to more general nonplanar particle domain boundaries. The main contribution of the paper is the development of a particle forcing method in the direction tangential to the domain boundary, which is based on the equivalent continuum‐flow boundary shear stresses along with an iterative forcing strength adjustment based on the extrapolated particle boundary velocity. Furthermore, an adaptation scheme is presented, which uses the finite‐volume flux residuals of the particle bin averaged velocity field as a truncation criterion for the iterative force‐update scheme. It is demonstrated that by comparing the residual reduction for the momentum equation in the nonhomogeneous directions during the molecular dynamics simulations with that for a homogeneous direction, the forcing iteration at which the statistical noise in the velocity field dominates the uncertainty in the forcing strength can be determined. At this point the iteration can be truncated. It is shown that with adaptive schemes of this type, the total number of MD evaluations required in a coupled Navier–Stokes/MD simulation can be reduced relative to a hybrid scheme with a fixed number of forcing‐strength updates. Copyright © 2011 John Wiley & Sons, Ltd.     

Combinatorial and approximative analyses in a spatially random division process

For a spatial characteristic, there exist commonly fat-tail frequency distributions of fragment-size and -mass of glass, areas enclosed by city roads, and pore size/volume in random packings. In order to give a new analytical approach for the distributions, we consider a simple model which constructs a fractal-like hierarchical network based on random divisions of rectangles. The stochastic process makes a Markov chain and corresponds to directional random walks with splitting into four particles. We derive a combinatorial analytical form and its continuous approximation for the distribution of rectangle areas, and numerically show a good fitting with the actual distribution in the averaging behavior of the divisions.     

误差合成空间固定系数模型的多阶段广义最小二乘估计

本文对时变系数的空间面板数据模型进行了研究,所研究的模型利用扰动项中的空间个体成分将不同时期的方程联系起来,同时,自变量系数和空间自回归系数是时变的,但不会随着观测个体的变动而变动。本文利用基于可行的广义最小二乘估计的多阶段方法对模型参数进行了估计,研究了估计量的大样本性质,并利用Monte Carlo方法模拟了其小样本性质。模拟结果表明,估计量的渐近性质随着样本容量的增加而改善。对中国省级地区间财税策略互动行为的实证案例也体现了本文理论模型的应用价值。     

A monocular pose measurement method of a translation-only one-dimensional object without scene information

A monocular method to measure the pose of a translation-only one-dimensional (1D) object containing at least two known characteristic points is presented. The position of any other point on the 1D object can be located after the pose measurement. Scene information is not needed to apply the method. If the distance between the characteristic points is unknown, there is a scale factor between the object's real positions and the measurement results. The method can also be used to measure the pose and shape parameters of a parallelogram, prism or cylinder object.