Specific Sorption Sites for Nitrogen in Zeolites NaLSX and LiLSX

Specific sorption sites for nitrogen, N₂, in NaLSX and LiLSX zeolites were investigated using a DRIFT spectroscopic method. Sorption of molecular hydrogen, H₂, by NaLSX or LiLSX zeolite at 77 K with DRIFT control of perturbation of sorbed molecules allowed to discriminate two or three different types of specific sorption sites in the respective zeolites. Their H–H stretching frequencies are 4077 and 4081 cm^–1 for NaLSX, and 4061, 4084 and 4129 cm^–1 for LiLSX. With reference to an independent investigation by methods of both sorption thermodynamics and molecular modeling for N₂ sorption on LiLSX, the first two of the corresponding bands were ascribed to H₂ sorption on lithium cations, Li⁺, localized in supercages of the faujasite, FAU, zeolite framework at sites SIII and SIII, while the latter band most likely belongs to H₂ sorption on Li⁺ cations at sites SII, and on hydroxyl groups, OH. Sorption of N₂ by Li⁺ cations at sites SIII and SIII is the strongest, resulting in a decrease of intensity of the corresponding DRIFT bands that stem from subsequent H₂ sorption. Nitrogen sorption by Li⁺ cations at sites SII is much weaker. Sorption of N₂ on Na⁺ cations at sites SIII in NaLSX zeolite is also stronger than by Na⁺ cations at sites SII.     

Sorption of C6 Alkanes in Aluminophosphate Molecular Sieve, AlPO4-5

Sorption of C₆ alkanes viz.,n-hexane, 2-methylpentane, 2,2-dimethyl butane, 2,3-dimethyl butane, cyclohexane and methyl cyclopentane in AlPO₄-5 is studied and sorption capacity and thermodynamic parameters (H⁰, H, G, S and S_a) at various sorption coverage for these sorbates have been estimated. The initial heat of sorption (H⁰) is found to increase with the degree of branching in the alkane chain. The sorbate-sorbate interactions are found to be more prominent during the sorption of doubly branched alkanes and cyclic alkanes and a higher sorption capacity has been observed for cyclic alkanes. Based on the results obtained, a packing model has been proposed for various C₆ alkanes inside the AlPO₄-5 channel.     

Elaboration and characterisation of PDMS-HTiNbO5 nanocomposite membranes

Poly(dimethylsiloxane) (PDMS)-HTiNbO₅ nanocomposite membranes with various HTiNbO₅ nanofiller content were prepared by melt intercalation. WAXS diffraction measurements and TEM observations have suggested that the HTiNbO₅ mineral was exfoliated in the PDMS matrix. The influence of the filler in the membrane was evaluated by water diffusion, gas permeation (CO₂, N₂, O₂, ethane and ethylene), toluene pervaporation and by CO₂ sorption measurements.A filler content of only 2 wt.% in PDMS-HTiNbO₅ nanocomposite membranes slows down the water diffusion significantly, and a filler content of 5 wt.% reduces also the permeability of the films for toluene. The addition of a filler content up to 10 wt.% do not significantly influences the gas permeability (P) except for CO₂. The PDMS matrix appears to be highly permeable and, therefore, a decreasing effect on P is only marked for a very high HTiNbO₅ content. This effect is more pronounced for CO₂, the P value of which decreases by 80% when the amount of nanofiller is 40 wt.%. The sorption measurements show that the interaction between CO₂ and PDMS is weak (isotherms agree with Henry’s law). The filler decreases the solubility of CO₂ in the films (S = 7.94 × 10⁻³ and S = 5.44 × 10⁻³ cm³ STPcm⁻³ film cmHg⁻¹ for PDMS and PDMS-HTiNbO₅ 40 wt.%, respectively).     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

羧甲基交联壳聚糖树脂的合成、表征及其应用

羧甲基交联壳聚糖树脂(C-C-CTS)与普通壳聚糖树脂相比,既能在酸性介质中不溶又不失去其螯合性能.其合成采用简单的2步法,首先用还氧氯丙烷交联,然后羧甲基化.C-C-CTS的结构用红外光谱和X-ray光电子能谱进行表征.C-C-CTS树脂对重金属离子有很好的螯合吸附能力,每种树脂对Pb(Ⅱ),Cu(Ⅱ)和Zn(Ⅱ)的吸附能力分别为8.73,10.12和4.89 mg·g-1,并且在不同的pH条件下对Pb(Ⅱ)、Cu(Ⅱ)和Zn(Ⅱ)有很好的选择性吸附,最后还讨论了C-C-CTS树脂对Pb(Ⅱ)的吸附机理.     

Luminescent Properties of Zeolite Modified by Eu(III) and Tb(III) Complexes

The luminescence of the sorbates of the Eu(III) and Tb(III) complexes on the CaA-type zeolite with derivatives of aliphatic and aromatic carbonic acids has been studied. It is shown that the luminescent materials obtained can be used as light regulators and transformers which absorb energy in the UV spectral region and transform it into visible radiation.     

Adsorption and Desorption of the Herbicide Thiazafluron as A Function of Soil Properties

Abstract

The effect of soil composition on the adsorption and desorption of the herbicide thiazafluron [1.3-dimethyl-1-(5-trifluoromethyl-1,2,3-thiadiazol-2-yl) urea] by 20 soil samples of 13 selected soil profiles of southern Spain has been studied. The adsorption curves conformed the Freundlich equation and the values of the constants, Kf and nf, ranged from 0.13 to 4.64 and from 0.14 to 1.30, respectively. The simple and multiple regression analysis between Kf and soil properties revealed soil clay content, illite content and CEC as fundamental factors determining thiazafluron adsorption by soils. Unlike other substituted ureas, non significant correlation was found with soil organic matter. Desorption of thiazafluron was hysteretic in all cases, showing and values much lower than those for adsorption. Desorption kinetic indicated that this hysteresis is essentially due to irreversible adsorption, although some degradation seems also to occur. The Freundlich desorption Kfd values were closely related to the same factors as Kf: clay and illite contents and also montmorillonite content, suggesting that most of the hysteresis was due to thiazafluron irreversibly bound to soil clay mineral components.     

Controlled Activity Polymers. IV. Copolymers of 2-(1-Naphthylacetyl)Ethyl Acrylate With Hydrophilic Comonomers: Synthesis and Characterization

2-(1-Naphthylacetyl)ethyl acrylate (NAEA) was synthesized by esterification of 1-naphthylacetic acid (NAA) and 2-hydroxyethyl acrylate (HEA) and then polymerized to obtain the polymer-bound auxin NAA. The resulting polymer is potentially useful as a plant growth regulator through hydrolytic release of NAA. Copolymers of NAEA with hydrophilic comonomers were prepared by solution polymerization. The copolymer compositions were determined from elemental analysis, ¹³C-NMR, and UV spectroscopy. The copolymer microstructure was predicted from the reactivity ratios in order to investigate the influence on the behavior of controlled release. These model structures will be utilized for assessment of structure/hydrolysis relationships in a subsequent paper.     

Mobility of small molecules in membrane materials based on copolyimide P84

1. Download : Download high-res image (172KB)
2. Download : Download full-size image

     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.