The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Application of jäntti's method to volumetric adsorption measurements

Jäntti introduced a method to calculate the adsorption equilibrium by measuring the actual adsorbed amount three times after a change to the gas pressure. By this method the experimental time for adsorption measurement can be considerably shortened. The procedure was developed for use in adsorption measurements where the adsorbed masses are directly measured with a balance. In the present paper we will demonstrate that the method is particularly useful in volumetric (manometric) measurements.     

Determination of thermodynamic functions of sorption for cyclohexyl-, piperidyl-, morpholyl-, and thiomorpholyl-n-alkanes by capillary gas-liquid chromatography

The values of partial molar free energy (G), enthalpy (H), and entropy (S) of sorption in the homologous series ofN-alkylpiperidines,N-alkylmorpholines,N-alkyl thiomorpholines, and alkylcyclohexanes were determined. It was found that the free energy of sorption is determined to a greater extent by the enthalpy term than by the entropy one. The free energy of sorption of the first homolog decreases when then-alkyl chain is attached directly to the carbon atom of the cycle and increases in the case ofN-alkylsubstituted heterocycles. The influence of the heteroatom nature on intermolecular interactions of homologs with the nonpolar stationary phase was quantitatively estimated on the basis of thermodynamic data.Dead time necessary for calculation of the retention factor was determined by the retention of methane injected into the column simultaneously with the sample.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2030–2032, August, 1996.     

Estimation of the dimensions of nano-capillaries from gas adsorption data

A new approach is presented to determine the dimensions of cylindrical nanopores from adsorption measurements.     

Interaction of long chain alkylammonium cations with reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared using lithium thermal treatment. The sorption of octylammonium (OA), dodecylammonium (DDA) and hexadecylammonium ions (HDA) on differently charged samples were studied. The amounts of DDA and HDA sorbed on each RCM exceed the cation exchange capacity (CEC) but that of OA exceeds only the CEC of samples with the lowest CEC. The sorption is affected not only by the layer charge but also by the formation of collapsed interlayer spaces in the lowest charged montmorillonites. X-ray measurements confirmed the decrease of the layer charge after lithium thermal treatment and the layer charge heterogeneity in RCMs.     

Simple route to secondary amides of phosphorylacetic acids and their use for extraction and sorption of actinides from nitric acid solutions

An efficient method for the synthesis of secondary alkylamides of phosphorylacetic acids (APA) was proposed. The method involves amidation of ethyl phosphorylacetates with primary aliphatic amines. The scope of reaction was determined. Reactions with ethylenediamine and 1,4-diaminobutane yield the corresponding bisamides; in the case of 1,3-diaminopropane, N-(3-aminopropyl)diphenylphosphorylacetamide or N,N-propylenebis(diphenylphosphorylacetamide) was obtained, depending on the reaction conditions. The extraction of americium(III) complexes and the sorption of uranium(VI) by sorbents with physically sorbed APA from nitric acid solutions were studied. There is no correlation between the partition coefficient of americium(III) and the structure of APA; in the sorption of uranium(VI), the degree of extraction depends on the complexone structure.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2394–2402, November, 2004.     

Crystalline Inclusion Compounds Derived from Derivatives of Mandelic Acid. Host Synthesis, Inclusion Formation, and X-Ray Structures of a Free Host Compound and of DMSO Inclusion Complexes in Both Racemic and Optically Resolved Forms

New chiral host compounds based on mandelic acid derivatives having methyl (6a, b and 8a, b) or bromo substituents (7a, b) attached to the phenyl ring of mandelic acid and involving additional aromatic groups were synthesized. The inclusion properties of both the racemic and the optically resolved host species are reported, including solvent co-crystallization as well as chiroselective and vapour sorptive inclusion. The structures of the free racemic host compound 6b and of the DMSO inclusion compounds of optically resolved and racemic 8 (8a and 8b, respectively) have been determined by X-ray analysis. Enantiomeric pairs of molecules in 6b form centro-symmetric dimers by mutual hydrogen bonding of one hydroxyl group while the other is involved in O-–H ... interactions. The guest molecules in the DMSO complexes of 8a and 8b are bound via hydrogen bonds to two host molecules related by translation along crystallographic axes. Parallels to previous hosts of this type are drawn.     

Comparison of micro- and mesoporous inorganic materials in the uptake and release of the drug model fluorescein and its analogues

The uptake of the three species of the drug model fluorescein (fluorescein sodium salt (FNa), fluorescein free acid (F), and fluorescein diacetate (FDA)) by zeolite NaX and the mesoporous zeotype MCM-41 was investigated as well as their release rates into solutions at pH 7 and pH 4.5. UV/Vis analysis was carried out at a wavelength of 490 nm. Uptakes of the sodium salt of 9 % for zeolite X and 14 % for MCM suggest little penetration of the pores. The use of ethanol as the loading solvent for F resulted in little uptake for both zeolitic materials due to the successful competition of the ethanol for binding sites. Use of acetone (weaker proton acceptor) as loading solvent significantly improved the uptake of F to 17 % and 12 % for zeolite X and MCM, respectively, whilst the uptake of FDA in acetone increased still further to 22 % and 17 % for zeolite X and MCM, respectively. Generally there was a large initial release of the fluorescein analogues from the surface of the zeolites with very little further increase over time. The prescence of an esterase enzyme in the release medium of FDA tripled the release from MCM to 15 % but left the release from zeolite X unaffected at 6 %. The results obtained show that uptake of fluorescein and its analogues is dependent on the loading solvent used, the amount released is influenced by not only the solvent but the pH and the presence of enzymes in the release medium.     

Comparative study of 8-hydroxyquinoline derivatives as chelating reagents for flow-injection preconcentration of cobalt in a knotted reactor

8-Hydroxyquinoline (HQ), 2-methyl-8-hydroxyquinoline (CH₃-HQ), 5,7-dichloro-2-methyl-8-hydroxyquinoline (Cl₂-CH₃-HQ), 5,7-dibromo-8-hydroxyquinoline (Br₂-HQ), 5-sulfo-7-iodo-8-hydroxyquinoline (ferron) and 5-sulfo-8-hydroxyquinoline (SO₃H-HQ) were compared as chelating reagents for on-line sorption preconcentration of cobalt in a knotted reactor (KR) precoated with the reagent. The results obtained with the different HQ derivatives reveal those properties of the chelating reagent responsible for the processes taking place in the KR. The influence of hydrophobicity, acidity, stability of the cobalt chelate and type of substituents in the HQ ring system on the separate steps of the flow injection (FI) preconcentration procedure are discussed. According to the performance characteristics of the different HQ derivatives, the most important parameters for on-line preconcentration in a KR are the hydrophobicity of the reagent and the stability of the chelate complex with the analyte.     

Surface and Subsurface Oxygen on Platinum in a 0.5 M H2SO4 Solution

The oxidation of polycrystalline platinum in 0.5 M H₂SO₄ is studied by cyclic voltammetry at potential scan rates of 5–500 mV s^–1 while varying the potential cycling range. The scheme, which is proposed for explaining the observed acceleration and deceleration of oxygen sorption at 0.75–1.0 V, accounts for the presence of oxygen in the subsurface layers of platinum (O_ss) and the formation of a barrier layer comprising complexes O_ss–Pt _n –SO₄. Cycling platinum secures certain steady-state contents of O_ss at 0.01–1.35 V. In an anodic scan, O_ss accumulates at E > 0.85 V (slow post-electrochemical stage) due to exchange of platinum and oxygen atom sites. In a cathodic scan, the desorption of most oxygen gives way to the adsorption of anions, which prevent residual O_ss from appearing on the surface. The residual O_ss disappears at E < 0.1 V after a sufficiently complete desorption of anions and the destruction of stable complexes O_ss–Pt _n –SO₄. Varying the potential cyclic limit leads, after a delay, to other steady-state O_ss contents.