激光多孔端面气体非接触机械密封稳定性分析

基于气体润滑理论,采用与螺旋槽端面密封的对比分析方法,研究了均匀分布激光加工多孔端面气体非接触机械密封的稳定性,数值分析了密封间隙、不对中角度和外界扰动对开启力、泄漏量、气膜刚度以及密封间隙扰动振幅等密封参数的影响规律.结果表明:多孔密封中的动压效应微弱,开启力与气膜刚度与转速无关,密封端面开启时容易发生接触磨损;多孔密封端面压力分布均匀,不对中引起的开启力波动幅度小,但是角向容易产生自激振动,密封环外侧容易发生接触磨损;多孔密封轴向气膜刚度较小,具有更小的扰动振幅,密封端面开启后有利于保持密封间隙的稳定,减少密封端面的接触摩擦.     

工件的释放时间和加工时间具有一致性的单机在线排序问题研究

工件的释放时间和加工时间具有一致性, 是指释放时间大的工件其加工时间不小于释放时间小的工件的加工时间, 即若$r_{i}\geq r_{j}$, 则$p_{i}\geq p_{j}$。本文在该一致性约束下, 研究最小化最大加权完工时间单机在线排序问题, 和最小化总加权完工时间单机在线排序问题, 并分别设计出$\frac{\sqrt{5}+1}{2}$-竞争的最好可能在线算法。     

带优化参数的SVR模型及在软件成本估算中的应用

随着社会各行各业对软件开发投资的日益增长,产业界和学术界越来越关注可靠的软件成本估算,以有效控制软件开发过程中相关风险.为了能更准确地估算软件成本,提出一种带遗传算法优化参数的支持向量回归机模型,用遗传算法来优化支持向量回归机模型中的参数集(C,γ,ε),可以避免参数选择的盲目性,能显著提高支持向量回归机模型的预测能力.分别用IBM DP、Kemerer和Hallmark三个数据库来验证模型的有效性,并与常用的线性回归模型进行对比,结果显示采用遗传算法优化的支持向量回归机模型具有很好的学习精度和推广能力,在MMRE和Pred(0.25)两个标准上都优于线性回归模型.     

从对比中更好地把握微积分的教学改革

美国微积分教学改革的许多方面值得借鉴.从对比的角度反思微积分教改的不足和差距,以便更好地把握今后的教改工作,明确在点点滴滴的教学过程中,应当实实在在地做些什么、怎么做.     

菲涅耳衍射的数值计算

利用Mathematica软件分别计算了单缝衍射及双缝衍射的光强分布,成功解决了菲涅耳衍射的计算这一较难问题,并得到了双缝衍射向杨氏双逢干涉过渡的具体条件,完成了实验室内难以完成的任务.     

自由摆的平板控制系统设计

为了实现对基于自由摆的平板的控制,建立了基于自由摆的平板控制系统.首先分析平板的控制转角与自由摆转角的关系,推导出关系式,再对控制单元、反馈单元进行分析比较给出方案,采用32位LPC2138(ARM7)处理器为平板控制系统的中央控制单元,实现由高精度电位器测量出摆动角度后由步进电机控制的平板在周期摆动中做相应反馈调整,然后在现有器件的基础上编制出控制软件,在设备上进行调试,最后对系统的精度进行分析并进行实际测量.测量结果表明激光笔在摆动中照射在靶板上的光斑偏离基准线最大0.89cm,基本满足对平板的控制要求.     

A novel pose and illumination robust face recognition with a single training image per person algorithm

In the real-world application of face recognition system, owing to the difficulties of collecting samples or storage space of systems, only one sample image per person is stored in the system, which is so-called one sample per person problem. Moreover, pose and illumination have impact on recognition performance. We propose a novel pose and illumination robust algorithm for face recognition with a single training image per person to solve the above limitations. Experimental results show that the proposed algorithm is an efficient and practical approach for face recognition.     

The Design and Implementation of Usable ODE Software

In the last decade it has become standard for students and researchers to be introduced to state-of-the-art numerical software through a problem solving environment (PSE) rather than through the use of scientific libraries callable from a high level language such as Fortran or C. In this paper we will identify the constraints and implications that this imposes on the ODE software we investigate and develop. In particular, the way a numerical solution is displayed and viewed by a user dictates that new measures of performance and quality must be adopted. We will use the MATLAB environment and ODE software for initial value problems, boundary value problems and delay problems to illustrate the issues that arise and the progress that has been made. One of the major implications is the expectation that accurate approximations at off-mesh points must be provided. Traditional numerical methods for ODEs have produced approximations to the underlying solution on an associated discrete, adaptively chosen mesh. In recent years it has become common for the ODE software to also deliver approximations at off-mesh values of the independent variable. Such a feature can be extremely valuable in applications and leads to new measures of quality and performance which are more meaningful to users and more consistently interpreted and implemented in contemporary ODE software. Numerical examples of the robust and reliable behaviour of such software will be presented and the cost/reliability trade-offs that arise will be quantified.     

软件复用技术实现策略研究

首先分析和提出了一种基于ＯＷＥ（ＯｂｊｅｃｔＷｉｔｈ Ｅｖｅｎｔ）的软构件描述方法,然后深入探讨了如何利用面向对象方法实现软件复用的策略,最后着重分析了继承机制对软件复用的支持以及在分布处理环境中的改进方案．