Collision of Bare Ion Si~(14 ) with the Same Z Slow-atom Si

1　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｔｈｉｓｐａｐｅｒｗｅｄｉｓｃｕｓｓｔｈｅｃｏｌｌｉｓｉｏｎｏｆｂａｒｅｉｏｎＳｉ14 ｗｉｔｈｔｈｅｓａｍｅＺｓｌｏｗａｔｏｍＳｉ.Ｉｎｒｅｃｅｎｔｐｕｂｌｉｃａｔｉｏｎｂａｒｅｈｉｇｈ-Ｚｉｏｎｓｃｏｌｌｉｓｉｏｎｗｉｔ...     

Effect of γ-irradiation on slow crack growth in a copolymer of polyethylene

The effect of γ-irradiation on slow crack growth (SCG) in a medium density polyethylene (MDPE) was measured and compared with behavior of high density polyethylene (HDPE) and a recrystallized HDPE (RCHDPE). The three materials exhibited the same dependence on dose up to 3 Mrd. The HDPE became brittle above 50 Mrd. The resistance to SCG of MDPE and RCHDPE increased very rapidly with dose above 3 Mrd, until at 50–80 Mrd their resistance to SCG became extraordinarily high. This high resistance to SCG was accompanied by a transition from crazing to shear deformation at the root of a notch. It was found that for the same concentration, crosslinks are more effective than short chain branches for increasing resistance to SCG. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2349–2354, 1998     

Y3+/Li+和Y3+/Na+双掺杂氟化钡快响应闪烁晶体

氟化钡(BaF₂)晶体是已知响应最快的闪烁晶体,在高能物理、核物理及核医学等领域有着广泛的应用前景。抑制BaF₂晶体的慢发光成分对其工程应用至关重要。本文利用坩埚下降法制备了高Y³⁺掺杂浓度5%、8%、10%(摩尔分数)的BaF₂晶体,并采用Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂的方法形成电荷补偿阻止间隙F^-的产生,制备了双掺杂型BaF₂快响应闪烁晶体,进而基于优化的5 ns和2 500 ns时间门宽测试方法,研究了Y³⁺掺杂浓度以及Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂浓度对BaF₂闪烁晶体快/慢成分比的影响规律。结果表明,生长的高浓度Y³⁺掺杂BaF₂晶体的光学质量优异,在220 nm和300 nm处透过率分别高于90%和92%;随着Y³⁺掺杂浓度由0提高至10%,BaF₂晶体的慢发光成分显著降低,快/慢成分比由0.15提高至1.21;生长的Y³⁺/Li⁺及Y³⁺/Na⁺共掺杂BaF₂晶体的慢发光成分较Y³⁺掺杂BaF₂晶体进一步降低,快/慢成分比最高分别可达1.63和1.61。研制的双掺杂BaF₂快响应闪烁晶体有望应用于高能物理、核物理前沿实验等重要领域。     

1/f noise and slow relaxations in glasses

Recently we have shown that slow relaxations in the electron glass system can be understood in terms of the spectrum of a matrix describing the relaxation of the system close to a metastable state. The model focused on the electron glass system, but its generality was demonstrated on various other examples. Here, we study the noise spectrum in the same framework. We obtain a remarkable relation between the spectrum of relaxation rates λ described by the distribution function P (λ) ～ 1/λ and the 1/f noise in the fluctuating occupancies of the localized electronic sites. This noise can be observed using local capacitance measurements. We confirm our analytic results using numerics, and also show how the Onsager symmetry is fulfilled in the system.     

Time gap for temporal cloak based on spectral hole burning in atomic medium

We demonstrate the possibility of creating a time gap in the slow light based on spectral hole burning in a fourlevel Doppler broadened sodium atomic system. A time gap is also observed between the slow and the fast light in the hole burning region and near the burnt hole region, respectively. A cloaking time gap is attained in microseconds and no distortion is observed in the transmitted pulse. The width of the time gap is observed to vary with the inverse Doppler effect in this system. Our results may provide a way to create multiple time gaps for a temporal cloak.     

Desynchronization of large scale delayed neural networks

We consider a ring of identical neurons with delayed nearest neighborhood inhibitory interaction. Under general conditions, such a network has a slowly oscillatory synchronous periodic solution which is completely characterized by a scalar delay differential equation with negative feedback. Despite the fact that the slowly oscillatory periodic solution of the scalar equation is stable, we show that the associated synchronous solution is unstable if the size of the network is large.

     

Self-organization effect in poly（3-hexylthiophene）： methanofullerenes solar cells

This paper studies the self-organization of the polymer in solar cells based on poly（3-hexylthiophene）： [6, 6]-phenyl C61-butyric acid methyl ester by controlling the growth rate of active layer. These blend films are characterized by UV-vis absorption spectroscopy, charge-transport dark J - V curve, x-ray diffraction pattern curve, and atomic force microscopy. The results indicate that slowing down the drying process of the wet films leads to an enhanced selforganization, which causes an increased hole transport. Increased incident light absorption, higher carrier mobility, and balanced carrier transport in the active layer explain the enhancement in the device performance, the power conversion efficiency of 3.43% and fill factor up to 64.6% are achieved under Air Mass 1.5, 100 mW/cm^2.     

The effect of annealing on slow crack growth in an ethylene-hexene copolymer

A quenched ethylene-hexene copolymer was annealed in the temperature range of 86 to 127°C. The morphological changes were monitored by differential scanning calorimetry (DSC) and density. The slow crack growth resistance tested at 80°C was a maximum at an annealing temperature of 113°C and a minimum of 123°C. The lifetimes can be varied by more than a factor of 20 depending on the thermal treatment. The increase in slow crack growth resistance between 86 and 113°C is attributed to an increase in the strength of the crystals by becoming more perfect and to the conversion of loose tie molecules into taut tie molecules. The decrease in strength between 113 and 123°C is attributed to the decrease in tie molecules when a large fraction of the as-quenched crystals begin to melt.     

Averaging in the Autoresonance Model

Mathematical Notes -     

Slow Solutions of a Differential Inclusion and Vector Optimization

The present work develops a new approach for studying the dynamic evolution of a vector optimization problem. We introduce a convenient differential inclusion that rules the dynamics of the optimization problem. Actually we consider a sort of ‘gradient system’ defined by vector valued functions. The main tool used is a completely new adaptation to the vector problem of the notion of pseudogradient, which is a well-known concept in the modern critical point theory. Finally we study a special class of solutions of the above quoted differential inclusion: the slow solutions.