Stopped-flow injection analysis. The influence of diffusion on dispersion of normal and reverse flow injection

A relationship is derived to enable the comparison of the dispersion heights of normal and reverse flow injection analysis (FIA). A single channel flow system is employed in the absence of a chemical reaction. The stopped-flow injection method is used to probe the influence of molecular diffusion on the overall dispersion of normal and reverse FIA, which appeared to demonstrate fundamentally different diffusion behaviors. Small discrepancies are observed between the dispersion heights, which are enhanced by the stopped-flow period, especially when unmatched matrix ionic compositions of the indicator and counter solutions were involved. For these conditions, the diffusion flux rate is enhanced considerably, displaying a peak, in addition to the transient, for both methods. The influence of diffusion on the dispersion characteristics of normal and reverse FIA is discussed theoretically. Diffusion in the proposed model is postulated to oppose dispersion by convection. The latter initiates concentration gradients in the injection zone and propagates it with flow time over the dispersion zone profile. The diffusion flux then reacts in order to confine the indicator dispersion for normal FIA and to enhance it for reverse FIA. This model is consistent with the experimental results and accounts for most of the phenomena encountered. Probably owing to the influence of secondary flow phenomena, the use of coiled tubes has suppressed the effects of diffusion on the overall dispersion behavior.Part of the experimental work was performed at IMI Institute for Research and Development, Haifa, Israel.     

Synthesis and characterization of poly(amide sulfonamide)s (PASAs)

New diamino monomers IIa – IIg were synthesized in a two-step reaction sequence starting from p-acetamidobenzenesulfonyl chloride. Solution polymerization of these monomers in DMAC with terephthaloyl or isophthaloyl chloride resulted in the formation of a series of 14 poly(amide sulfonamide)s (PASAs) in excellent yield (> 95%). The polymers have in-trinsic viscosities of 0.32–1.11 dL g^?1. Except for polymers IIIa ? p and IIId - p , all other PASAs were readily soluble in aprotic polar solvents including DMAC, DMF, and DMSO. Thermogravimetric analyses of the polymers showed moderate thermal stability with 10% weight loss being recorded in the range of 325–408°C. In addition, these polymers exhibit moderate chemical stabilities toward alkali, acidic, and chromic acid solution. © 1995 John Wiley & Sons, Inc.     

An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.     

Studies on Cyclodextrin Inclusion Complex by Fluorescence Anisotropy

An equation for determining the equilibrium association constant (KA) of cyclodextrin inclusion complex with fluorescence anisotropy is derived and used to determine KA of pyrene-B-cyclodextrin inclusion complex. The existing forms of cyclodextrin inclusion complex in solution, the interaction type of host with guest, and the possibility of application of B-cyclodextrin in the analysis of metal ions using naphthalene derivative as a ligand are discussed based on the equation derived along with the curve of fluorescence anisotropy versus cyclodextrin concentration of guest/cyclodextrin system.     

煤的超临界醇萃取脱硫：Ⅲ.形态硫的变化

本文分别应用Ｍｏｓｓｂａｕｅｒ谱和ＸＰＳ（Ｘ射线光电子能谱）技术考察不同反应 条件下固体产物中的无机硫和有机硫的形态变化，结果表明；在超临界醇萃取脱硫过程中，黄铁矿硫的转化反应如下：ＦｅＳ２－ＦｅＳ＋Ｆｅ１－ｘＳ，，转化的数量和深度主要取决于反应温度。２７５℃时磁黄铁矿（Ｆｅ１－ｘＳ）形式为ＦｅＳ１．１０１，４５０℃时为ＦｅＳ１．０８５；有机硫基团中ＰｈＳＨ ，Ｐｈ２Ｓ和四氢噻吩较易脱除，Ｐｈ２Ｓ     

The absence of nitrone form in re-determined crystal structure of 2-hydroxyimino-3-methyl-4-nitro-2,5-dihydrothiophene 1,1-dioxide

Crystal and molecular structures of 2-hydroxyimino-3-methyl-4-nitro-2,5-dihydrothiophene-1,1-dioxide C₅H₆N₂O₅S (I) have been re-determined by single crystal X-ray diffraction analysis. The structure of I (space group P2₁2₁2₁, a = 6.124(1) Å, b = 9.205(2) Å, c = 14.884(3) Å, Z = 4) was solved by the direct method and refined anisotropically in the full-matrix approximation to R = 0.064 using all 1756 measured independent reflections (automated diffractometer CAD-4, λCuK_α, anomalous scattering taken into account). This study proves that the compound I contains a disordered group H-O-N=C, but not the isomeric nitrone group O←N(H)=C, as it has been concluded by the workers who pioneered single crystal X-ray diffraction study of I and erroneously took the second low-occupied oxygen position of the disordered hydroxyimine group for H at N atom.     

Calculation of the proton affinities of polyfluorobenzenes and the activation energies for 1,2-hydrogen shifts in their carbocations

Isolated polyfluorobenzene (PFB) molecules and their protonated forms are investigated by the AM1 method with full geometry optimization. The proton affinities of PFB are estimated for different protonated positions. The proton affinity of PFB averaged over all isomers is shown to decrease monotonically as the number of fluorine atoms in the molecule increases. The relative populations of different isomers of arenonium ions (AI) formed by PFB protonation are determined. From the calculated data, the value of ⁺ for the F atom in theipso-position is estimated as 1.00. The activation energies of the 1,2-hydrogen shifts in AI are calculated. The dependences of the proton affinity and the activation energies of 1,2-hydrogen shifts on the number of halogen atoms are found to have distinct characters for PFB and polychlorobenzenes. The physical reasons for these difference are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1878–1882, November, 1993.     

Thermostability of <Emphasis Type="Italic">Cromobacterium viscosum</Emphasis> lipase in AOT/isooctane reverse micelle

The thermostability of Cromobacterium viscosum lip ase (EC 3.1.1.3) entrapped in AOT (sodium bis-[2-ethylhexyl] sulfosuccinate) reverse micelles was in creased by the addition of short-chain polyethylene glycol (PEG 400). Two different approaches were considered: (1) the determination of half-life time and (2) the mechanistic analysis of deactivation kinetics. The half-life of lipase entrapped in AOT/isooctane reverse micelles with PEG 400 at 60°C was 28h, ninefold higher than that in reverse micelles without PEG 400. The lip ase entrapped in both reverse micellar systems followed a series-type deactivation mechanism involving two first-order steps. The deactivation constant for the first step at 60°C in PEG containing reverse micelles was 0.055 h¹¹, 11-fold lower than that in reverse micelles without PEG, whereas it remained almost constant for the second step. The inactivation energy of the lip ase entrapped in reverse micelles with and without PEG 400 was 88.12 and 21.97 kJ/mol, respectively.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.