主成分回归-紫外光度法同时测定食用香料麦芽酚和乙基麦芽酚

报道了一种快速、简便的同时测定食用香料麦芽酚、乙基麦芽酚光度法,方法基于在pH2.87的B R缓冲溶液中对麦芽酚和乙基麦芽酚两组分混合溶液进行光度测定,所得的重叠波谱数据用主成分回归法(PCR)、经典最小二乘法(CLS)和偏最小二乘法(PLS)等化学计量学方法进行处理,结果表明主成分回归法(PCR)的预报误差最小。对样品进行测定,获得了较好的定量分析结果。麦芽酚和乙基麦芽酚的线性范围均为1.0～20.0mg·L-1;检出限分别为0.4347和0 5589mg·L-1。     

Modeling of the relationship between electroosmotic flow and separation parameters in capillary zone electrophoresis using artificial neural networks and experimental design

The prediction of migration time of electroosmotic flow (EOF) marker was achieved by applying artificial neural networks (ANN) model based on principal component analysis (PCA) and standard normal distribution simulation to the input variables. The voltage of performance, the temperature in the capillary, the pH and the ionic strength of background electrolytes (BGE) were applied as the input variables to ANN. The range of the performance voltage studied was from 15 to 27 kV, and that of the temperature in the capillary was from 20 to 30 °C. For the pH values studied, the range was from 5.15 to 8.04. The range of the ionic strength investigated in this paper was from 0.040 to 0.097. The prediction abilities of ANN with different pre-processing procedure to the input variables were compared. Under the same performance conditions, the average prediction error of the migration time of the EOF marker was 5.46% with RSD = 1.76% according to 10 parallel runs of the optimized ANN structure by the proposed approach, and that of the 10 parallel predictions of the optimal ANN structure for the different performance conditions was 12.95% with RSD = 2.29% according to the proposed approach. The study showed that the proposed method could give better predicted results than other approaches discussed.     

Combining synchronous fluorescence spectroscopy with multivariate methods for the analysis of petrol-kerosene mixtures

Synchronous fluorescence spectroscopy (SFS) is a rapid, sensitive and nondestructive method suitable for the analysis of multifluorophoric mixtures. The present study demonstrates the use of SFS and multivariate methods for the analysis of petroleum products which is a complex mixture of multiple fluorophores. Two multivariate techniques principal component regression (PCR) and partial least square regression (PLSR) have been successfully applied for the classification of petrol-kerosene mixtures. Calibration models were constructed using 35 samples and their validation was carried out with varying composition of petrol and kerosene in the calibration range. The results showed that the method could be used for the estimation of kerosene in kerosene-mixed petrol. The model was found to be sensitive, detecting even 1% contamination of kerosene in petrol.     

Rapid and sensitive method for determining free amino acids in honey by gas chromatography with flame ionization or mass spectrometric detection

This paper describes a rapid, sensitive and specific method for determination of free amino acids in honey involving a new reaction of derivatization and gas chromatography (GC) with flame ionization (FID) and mass spectrometric (MS) detection. The method allows the determination of 22 free amino acids in honey samples in a short time: 8 and 5 min for GC-FID and GC-MS, respectively. Quantitation was performed using Norvaline as internal standard, with detection limits ranging between 0.112 and 1.795 mg/L by GC-FID and between 0.001 and 0.291 mg/L by GC-MS in the selected-ion monitoring mode. The method was validated and applied to a set of 74 honey samples belonging to four different botanical origins: eucaliptus, rosemary, orange and heather. The statistical treatment of data shows a correct classification of different origins over 90%.     

Simultaneous spectrophotometric determination of ethinylestradiol and levonorgestrel by partial least squares and principal component regression multivariate calibration

Two spectrophotometric methods for the determination of Ethinylestradiol (ETE) and Levonorgestrel (LEV) by using the multivariate calibration technique of partial least square (PLS) and principal component regression (PCR) are presented. In this study the PLS and PCR are successfully applied to quantify both hormones using the information contained in the absorption spectra of appropriate solutions. In order to do this, a calibration set of standard samples composed of different mixtures of both compounds has been designed. The results found by application of the PLS and PCR methods to the simultaneous determination of mixtures, containing 4–11 μg ml⁻¹ of ETE and 2–23 μg ml⁻¹ of LEV, are reported. Five different oral contraceptives were analyzed and the results were very similar to that obtained by a reference liquid Chromatographic method.     

Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.     

Multivariate calibration techniques applied to the spectrophotometric analysis of one-to-four component systems

The UV spectrophotometric analysis of a multicomponent mixture containing paracetamol, caffeine, tripelenamine and salicylamide by using multivariate calibration methods, such as principal component regression (PCR) and partial least-squares regression (PLS), was described. The calibration set was based on 47 reference samples, consisting of quaternary, ternary, binary and single-component mixtures, with the aim to develop models able to predict the concentrations of unknown samples containing as many as one-to-four components. The calibration models were optimized by an appropriate selection of the number of factors as well as wavelength ranges to be used for building up the data matrix and excluding any information about the interfering excipients included in pharmaceutics. The PCR and PLS models were compared and their predictive performance was inferred by a successful application to the assays of synthetic mixtures and pharmaceutical formulations.     

Improving (Q)SAR predictions by examining bias in the selection of compounds for experimental testing

ABSTRACT

Existing data on structures and biological activities are limited and distributed unevenly across distinct molecular targets and chemical compounds. The question arises if these data represent an unbiased sample of the general population of chemical-biological interactions. To answer this question, we analyzed ChEMBL data for 87,583 molecules tested against 919 protein targets using supervised and unsupervised approaches. Hierarchical clustering of the Murcko frameworks generated using Chemistry Development Toolkit showed that the available data form a big diffuse cloud without apparent structure. In contrast hereto, PASS-based classifiers allowed prediction whether the compound had been tested against the particular molecular target, despite whether it was active or not. Thus, one may conclude that the selection of chemical compounds for testing against specific targets is biased, probably due to the influence of prior knowledge. We assessed the possibility to improve (Q)SAR predictions using this fact: PASS prediction of the interaction with the particular target for compounds predicted as tested against the target has significantly higher accuracy than for those predicted as untested (average ROC AUC are about 0.87 and 0.75, respectively). Thus, considering the existing bias in the data of the training set may increase the performance of virtual screening.     

Effect of surface treatment on the Hamaker constant of intermediate modulus carbon fibers

The Hamaker constant of unsized intermediate modulus carbon fibers was evaluated by contact angle measurement following the Fowkes theory of interfacial energetics. The effects of a surface treatment (performed by the manufacturer) and an oxygen plasma treatment (performed by us), both of oxidizing nature, proved to slightly increase the value of the Hamaker constant to a level that enhanced by about 9% the Lifshitz-van der Waals contribution to the theoretical adhesion force between the fiber and an epoxy matrix. A possible explanation of the observed increase of the Hamaker constant is the higher contribution to the overall Lifshitz-van der Waals interaction of Keesom (orientation) and Debye (induction) forces.     

Construction and Analysis of N-phosphoryl Peptide Libraries

N-Phosphoryl peptide libraries were constructed by transformation from homo-oligopeptide libraries, which was synthesized by self-assembly of amino acids with the assistance of phosphorus oxychloride. Electrospray ionization mass spectrometry (ESI-MS) was used to monitor the reaction.