Molecular weight dependent structure and charge transport in MAPLE‐deposited poly(3‐hexylthiophene) thin films

In this work, poly(3‐hexylthiophene) (P3HT) films prepared using the matrix‐assisted pulsed laser evaporation (MAPLE) technique are shown to possess morphological structures that are dependent on molecular weight (MW). Specifically, the structures of low MW samples of MAPLE‐deposited film are composed of crystallites/aggregates embedded within highly disordered environments, whereas those of high MW samples are composed of aggregated domains connected by long polymer chains. Additionally, the crystallite size along the side‐chain (100) direction decreases, whereas the conjugation length increases with increasing molecular weight. This is qualitatively similar to the structure of spin‐cast films, though the MAPLE‐deposited films are more disordered. In‐plane carrier mobilities in the MAPLE‐deposited samples increase with MW, consistent with the notion that longer chains bridge adjacent aggregated domains thereby facilitating more effective charge transport. The carrier mobilities in the MAPLE‐deposited simples are consistently lower than those in the solvent‐cast samples for all molecular weights, consistent with the shorter conjugation length in samples prepared by this deposition technique. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 652–662     

Synthesis,Electrical Conductivity,Spectral and Thermal Stability Studies on Poly(aniline-co-o-nitroaniline)

o-Nitroaniline units were incorporated in the polyaniline backbone through copolymerization with aniline. The copolymers were synthesized for 1:3 and 1:1 molar ratios of aniline and o-nitroaniline in acidic medium using potassium persulphate as oxidant and their properties were compared with that of polyaniline. The polymers showed less electrical conductivity than polyaniline. Unlike polyaniline, the presence of nitro group caused higher frequency dependence of electrical conductivity. Electronic spectra showed a blue shift in both the band of the copolymers due to the decrease in the extent of conjugation leading to lower conductivity, which could also be explained in terms of a decrease of delocalization of electron as evinced from electron para magnetic resonance (EPR) data. Thermo gravimetric analysis (TGA) revealed that copolymer derived from 1:1 molar ratio showed comparable thermal stability with polyaniline and the one derived from 1:3 molar ratios is thermally less stable than polyaniline. Activation energies for thermal degradation were estimated using Broido equation. The temperature dependence of electrical conductivity suggested charge transport is mainly through variable range hopping.     

Preparation of Poly(N‐isopropylacrylamide) Microgels using Different Initiators Under Various pH Values

Ammonium persulfate (APS), 2,2′‐azobis(amidinopropane) dihydrochloride (V50) and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) were utilized to prepare temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAM) microgels by precipitation polymerization under various reaction pH conditions. Their particle sizes and swelling ratios depended on the reaction pH due to the pH dependence on the ionization degree of the decomposed fragments originating from the initiators and their hydrophilicity‐hydrophobicity. The more hydrophobic initiator, under the reaction pH conditions used, could be partitioned to a greater extent into the microgel particles due to the hydrophobicity of PNIPAM chains at the reaction temperature, which led to a more cross‐linked structure inside the microgels resulting in their smaller swelling ratio. pH dependence of surface charge density of the microgels with amidino groups or carboxylic acid groups on their surfaces was evidenced by the variation of their zeta potentials as a function of pH.     

CO Adsorption on N2‐Precovered NaY Faujasite: A FTIR Analysis of the Resulting Adsorbed Species

To productively complete the information regarding the reversible adsorption of a gas mixture on the micropores of cationic zeolites, the adsorption of the two gases N₂ and CO on NaY faujasite is taken as a model case study. We analyze herein CO adsorption (77 K) on two distinct N₂‐precovered NaY sets (low and medium). We outline the continuous desorption of N₂ adducts during CO admittance to full N₂ desorption for the highest CO loadings. These features contrast with preceding results obtained for N₂ loading on CO‐precovered NaY. By comparing these results with the sole CO admission and combining both studies regarding the co‐adsorption sets, we demonstrate the influence of the basic strength of the two gases regarding the nature of the surface‐adsorbed species formed. We also propose and discuss a hypothesis regarding the formation of adsorbed mixed species having both N₂ and CO as ligands. These new findings strengthen the statistical response of IR signatures as a helpful proposal for analyzing adsorbed species and their assignments. This survey completes the molecular understanding of gas‐mixture adsorption that lacks experimental data to date.     

Temperature-Dependent Surface-Enrichment Effects of Imidazolium-Based Ionic Liquids

We present the first systematic study of the influence of temperature on the degree of surface enrichment of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs). Using angle-resolved X-ray photoelectron spectroscopy, we demonstrate that the degree of surface enrichment strongly decreases with increasing temperature for all the studied ILs. For ILs with the same cation, but different anions, [C₈C₁Im]Br, [C₈C₁Im][TfO] and [C₈C₁Im][Tf₂N], no significant differences of the temperature-induced partial loss of surface enrichment are found. Measurements for [C₄C₁Im][TfO], [C₈C₁Im][TfO] and [C₁₈C₁Im][TfO] indicate a small effect of the chain length. For [C₁₈C₁Im][TfO], a continuous decrease of alkyl surface enrichment is found with increasing temperature, with no abrupt changes at the phase-transition temperature from the smectic A to the isotropic phase, indicating that the surface enrichment is not affected by this phase transition.     

Estimation of rating classes and default probabilities in credit risk models with dependencies

Let Y = m(X) + ε be a regression model with a dichotomous output Y and a one‐step regression function m . In the literature, estimators for the three parameters of m , that is, the breakpoint θ and the levels a and b , are proposed for independent and identically distributed (i.i.d.) observations. We show that these standard estimators also work in a non‐i.i.d. framework, that is, that they are strongly consistent under mild conditions. For that purpose, we use a linear one‐factor model for the input X and a Bernoulli mixture model for the output Y . The estimators for the split point and the risk levels are applied to a problem arising in credit rating systems. In particular, we divide the range of individuals' creditworthiness into two groups. The first group has a higher probability of default and the second group has a lower one. We also stress connections between the standard estimator for the cutoff θ and concepts prevalent in credit risk modeling, for example, receiver operating characteristic. Copyright © 2014 John Wiley & Sons, Ltd.     

Evolution of coercivity and its angular dependence in CoFe nanostructures subjected to field cooling

Evolution of coercivity and its angular dependence in CoFe nanostructures subjected to field cooling has been investigated in this work. Spherical CoFe grains with an average diameter of 30 nm were grown on a silicon substrate using electron beam evaporation. Further, the as‐deposited sample was subjected to field cooling. The morphology and topography of the sample before and after field cooling were characterized by atomic force microscopy and SEM. Magnetic force microscopy indicated that there is a good uniformity of magnetization throughout the sample after field cooling. Vibrating sample magnetometer measurements indicate that the coercivity in CoFe nanostructures is dependent on shape of the nanostructures. Copyright © 2013 John Wiley & Sons, Ltd.     

A measure of mutual complete dependence in discrete variables through subcopula

Siburg and Stoimenov [12] gave a measure of mutual complete dependence of continuous variables which is different from Spearman's ρ and Kendall's τ. In this paper, a similar measure of mutual complete dependence is applied to discrete variables. Also two measures for functional relationships, which are not bijection, are investigated. For illustration of our main results, several examples are given.     

Reaction of OH radical and ozone with methyl salicylate – a DFT study

A theoretical study on the reaction mechanism of methyl salicylate (MeSA), a green leaf volatile organic compound with OH radical and ozone, has been carried out using density functional theory methods using B3LYP, M06‐2X and MPW1K functionals with 6‐311++G(d,p) basis set. The atmospheric degradation pathways of MeSA with OH radical are studied under two different pathways, viz. H‐atom abstraction and electrophilic addition of OH radical. The hydrogen abstraction from –OH group is found to be the dominant reaction channel with small barrier height. Likewise, the electrophilic addition of OH radicals at the para position of MeSA is found to be favourable rather than the ortho and meta positions because of the small barrier height. However, the reaction of MeSA with respect to the addition of O₃ is initiated only through the cycloaddition to the C?C bond, resulting in primary ozonide. The Arrhenius plot for most of the addition reaction shows positive temperature dependence, while for the abstraction reaction, it exhibits negative temperature dependence over the temperature range of 278–350 K. The calculated theoretical rate constants are in good agreement with available experimental data. Overall, the addition of both OH radical and ozone possesses ability to degrade MeSA, but slower when compared with the Cl radical. Copyright © 2015 John Wiley & Sons, Ltd.     

Temperature dependence of methanol and ethanol vapor sorption in polyhedral oligomeric silsesquioxane (POSS) containing methacrylate membranes

This study aimed to determine the solubility and temperature dependence of methanol and ethanol vapor caused by the difference in the substituents of polyhedral oligomeric silsesquioxane (POSS)-containing polymethacrylate membranes and the spacer length between the backbone and POSS backbone. Vapor sorption of methanol and ethanol was measured at 25°C, 35°C, and 45°C for three kinds of POSS-containing polymer membranes, namely, poly(methacryl isobutyl POSS), poly(methacrylate isobutyl POSS), and poly(methacryl phenyl POSS). The primary structures of the three POSS-containing polymer chains were columnar. The solubility of alcohol vapor on the POSS-containing polymer membranes followed the mechanism of solid adsorption and not the general dissolution diffusion. The sorption amount at all three temperatures was related to the surface area of the cylindrical primary structure and the solid adsorption property of the alcohol molecule of the POSS substituent. The sorption amount increased because of the large surface area and adsorption property of alcohol molecules. Although a typical glassy polymer shows exothermic mixing and a rubbery polymer displays endothermic mixing, the sample with the POSS substituent of isobutyl group exhibited an unusual behavior of endothermic mixing despite being a glassy polymer.