反相乳液聚合制备壳聚糖接枝共聚物及应用

以壳聚糖、丙烯酰胺、甲基丙烯酰氧乙基三甲基氯化铵为原料,硝酸铈铵为引发剂,Span-20为乳化剂,通过反相乳液聚合技术,合成壳聚糖阳离子接枝共聚物。分析讨论了乳化剂用量、引发剂浓度、油水体积比、单体配比、反应时间、反应温度对共聚物接枝率的影响,并采用正交试验方法对合成条件进行了优化。研究了其对重金属离子Cu2 、Cd2 、Zn2 的吸附性能。结果表明,在Cu2 、Cd2 、Zn2 的混合离子体系中,该共聚物对Cu2 、Zn2 有选择性吸附。     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Determination of sulfates of androsterone and epiandrosterone in human serum using isotope diluted liquid chromatography-electrospray ionization-mass spectrometry

A promising liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) for analysis of the sulfates of 5alpha-androgen, androsterone and epiandrosterone (A-S and EpiA-S) in human serum was developed. The method was used to assess one of the markers of 5alpha-reductase activity of males including patients with prostate cancer (PC). After deproteinization with acetonitrile, the androgen sulfates and the internal standard, [7,7,16,16-2H4]dehydroepiandrosterone-S, were extracted from human serum using a solid-phase extraction cartridge and washed with hexane. The extract was reconstituted and applied to the LC/ESI-MS system operated in the selected ion monitoring mode. The method was validated over the range 0.02-5 microg/mL (A-S) and 0.005-1.5 microg/mL (EpiA-S) using 10 microL of human serum. The method was a concise procedure without chemical or enzymatic hydrolysis of the conjugates, purification by high-performance liquid chromatography and/or derivatization, and proved to be satisfactory in its reproducibility and accuracy. The levels of these androgen sulfates tended to decrease during aging, and the A-S levels in the sera obtained from both healthy males and patients with PC were correlated with their EpiA-S levels.     

Small angle X-ray scattering study of an extremely elongated micelle system of CTAB-p-toluidine solution

Whenp-toluidine is added to an aqueous solution of CTAB, a remarkable increase of viscosity is accompanied by a spectacular elasticity. We detected the existence of extremely elongated rod-like micelles in electron micrographs. SAXS measurements indicate a closely packed array of cylindrical rod-like micelles, brought about when solutions flow through a thin capillary. A scattering maximum ofd=160 Å almost corresponds to the distance between the nearest neighbours of the cylindrical rod-like micelles. This value agrees with the diameter measured on electron micrographs. The second broad peak (d=75 Å) is assigned to a subsidiary maximum of the shape function of the cylinder with infinite length.     

Spherical coordinate representations of solvent composition for liquid chromatography method development using experimental design

One of the major techniques used for the method development of ternary and quaternary high performance liquid chromatography (HPLC) systems has been to use mixture designs, often referred to as "Glajch's Triangle". This technique does not allow for the systematic and simultaneous optimization of other factors such as gradient time, pH and temperature that affect the quality of separations. An alternative approach is to use experimental designs. The condition, however, that the composition of all components of the mobile phase must total 100% presents a problem when trying to mathematically represent ranges of each mobile phase constituent of a ternary or quaternary system. A method is described here, based on spherical coordinate representations, that adheres to the constraints of the mobile phase composition and allows experimental designs, such as central composite and factorial designs, to be applied to the simultaneous optimization of the mobile phase composition. Other factors, in particular temperature and gradient time, can then be included in the design. As a result of applying these designs to the HPLC separation of phenols and corticosteroids, it was found necessary to include three-way interactions between experimental factors in the model. The significance of these interactions shows that they need to be considered in HPLC method development.     

Sorption of aliphatic ketones from aqueous solutions by starch cryotextures

Capillary gas chromatography was applied to study the sorption of aliphatic ketones (C₆—C₁₁), including metamers, from aqueous solutions by corn starch cryotextures. The amount of ketones sorbed by cryotextures depends linearly on their concentrations in the initial sol. Equations describing the concentration dependence of sorption were proposed. The shape of sorption isotherms reflects the strength of sorption. The binding constants and the number of binding sites were determined for weakly sorbed ketones. The length of alkyl substituent and the position of the functional group are the crucial factors governing the sorption of ketones under conditions of excess binding sites. It was found that the degree of sorption increases with an increase in the carbon chain length from 6 to 9 carbon atoms. The presence of cooperation of binding sites for ketone sorption by cryotextures was demonstrated. The major part of ketones is sorbed irreversibly. This fact points to the formation of supramolecular complexes. Ketones with lower molecular masses are better sorbed by cryotextures than by native starch grains.     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

Cationic amino-containing N-isopropyl- acrylamide–styrene copolymer latex particles: 1-Particle size and morphology vs. polymerization process

 Cationic hydrophilic copolymer latexes were synthesized at 70 °C either by batch or two-step emulsifier-free emulsion poly-merization of styrene (St), N-iso-propylacrylamide (NIPAM), and aminoethylmethacrylate hydro-chloride (AEM) using 2,2′-azobis (2-amidinopropane) dihydrochloride as initiator. At first, batch polymerization kinetics were followed by gas chromatography (GC), revealing that NIPAM rapidly homopolymerized, before the polymerization of styrene had started. Particle size analysis by quasi-elastic light scattering (QELS) and transmission electron microscopy (TEM) showed that monodispersed particles were obtained with the formation of a poly[NIPAM] rich shell. Adding a small amount of the cationic monomer caused a strong decrease of the particle size without affecting the size monodispersity. When a shot process was used, a narrow particle size distribution was maintained, provided that the monomer addition was performed at a relatively high conversion of the first batch step. The poly[NIPAM] rich shell layer was larger with the shot process, but increasing the amino-containing monomer in the recipe resulted in a dramatic decrease of the thickness. Combination of transmission, scanning and atomic force microscopy techniques showed that these hydrophilic particles exhibited odd-shaped structures, the unevenness being dependent upon the performed process. Kinetic data and particle morphology information were inferred for discussion of the polymerization mechanism of this system. Received: 21 August 1997 Accepted: 22 October 1997     

Phase behaviour and microstructures of microemulsions (I)

By the orthogonal design, the optimal formation conditions for the middle-phase microemulsions in the system dioctadecyldimethylammonium chloride (DODMAC)/ sodium dodecyl sulfate (SDS)/n-butanol/n-hep-tane/brine were obtained as follows: W_DODMAC: W_SDS = 1:4-1:5,C _π-butanol (%) = 11.0-12.0, andC _NaCl (%) = 3.25 Investigations have been made on the effects of the concentrations of NaCl and n-butanol (l.0%-14.0%), the ratios ofWDODMAC: to W_SDS, and the kinds of alcohols (n-propanol, n-butanol, and n-pentanol) on the formation, the phase behaviour, the ultralow interfacial tensions, the optimal salinity (S^*), and the length of salinity (δS). Some rules and data were worked out about the formation and characteristics of the middle-phase microemulsions. The mi-crostructures of the middle-phase microemulsions were also studied by using FT-IR, ESR, and freeze fracture electron microscopy techniques. The results from the three methods show that the microstructures of the middlephase mi-croemulsions undergo the change from O/W to bicontinuous (B.C.) and to W/O. The distribution rule of the orga-nized molecule assemblies in the middle-phase microemulsions is conducible to constructing the model of microemulsion systems, to recognizing the microstructures of the middle-phase microemulsions, and to setting forth the relationship between the microstructures and macro-properties of rnicroemulsions. Project supported by the Niltional Natural Science Foundation of China and the Chinese Postdoctoral Science Foundation.     

鱼翅中硫酸软骨素的酶解-高效液相色谱法测定

建立了一种测定鱼翅中硫酸软骨素的酶解－高效液相色谱方法；该法利用在一定条件下硫酸软骨素能被硫酸软骨素酶ABC定量酶解成软骨素二糖，通过高效液相色谱法测定软骨素二糖的量来计算硫酸软骨素的含量。