硫酸镁的临床新用途

镁是人体必需元素之一。镁参与生命活动的所有重要方面,是细胞新陈代谢中各种酶系统的重要活化剂。硫酸镁为泻药和利胆药,近年来发现其具有治疗肺炎、肺心病、冠心病、高血压、胃十二指肠溃疡、急性腹泻、急性肾炎、偏头痛、破伤风和婴儿手足搐搦症等新用途。常用２５％硫酸镁１０～４０ｍＬ,用５％葡萄糖注射液稀释成１％浓度缓慢静滴。     

Determination of enantiomeric composition of samples by multivariate regression modeling of spectral data obtained with cyclodextrin guest-host complexes-Effect of an achiral surfactant and use of mixed cyclodextrins

The determination of the enantiomeric composition of samples by chemometric modeling of spectral data was investigated for samples of N,N′-bis-(-methylbenzyl) sulfamide and tryptophan methyl ester hydrochloride. Multivariate regression models (PLS-1) were developed from spectral data obtained on solutions containing N,N′-bis-(-methylbenzyl)sulfamide or tryptophan methyl ester hydrochloride in the presence of sodium dodecyl sulfate and mixed cyclodextrin host molecules. The regression models were subsequently used to predict the enantiomeric composition of laboratory-prepared test samples of N,N′-bis(-methylbenzyl)sulfamide or tryptophan methyl ester hydrochloride. The capability of the models to accurately predict the enantiomeric composition was evaluated in terms of the root-mean-square percent relative error (RMS %R.E.) as calculated from the results obtained with independently prepared validation sets of samples. It was found that the presence of SDS in most cases either had little effect on the predictive ability of the model or it actually reduced the predictive ability of the model. Moreover, it was found that the use of mixed CDs, either in the presence or absence of SDS, reduced the predictive ability of the regression model when compared with results obtained with individual CDs.     

Stopped-flow kinetic method for the fluorimetric determination of DNA traces in biological samples based on the interaction long-wavelength fluorophor, surfactant and nucleic acid

A simple and rapid method for the determination of DNA, involving the interaction between a surfactant, a long-wavelength fluorophor (LWF) and the nucleic acid, is presented. Different chemical systems based on the local effective charge of the surfactant/LWF system with DNA were tested, choosing cetyltrimethyl ammonium bromide (CTAB) and indocyanine green (ICG) for the development of the method. The fluorescence of ICG increases in the presence of CTAB, but it rapidly decreases in the presence of deoxyribonucleic acid. The initial reaction-rate (v₀) and signal at a prefixed-time (ΔIF₂₀) are monitored at 780 and 802 nm as excitation and emission wavelengths, respectively, using stopped-flow mixing technique, which makes the method applicable to automate routine analysis. Each measurement was obtained in about 30 s, being the integration time 0.1 s. The dynamic range of the calibration graph was 10-1500 ng mL⁻¹, with a detection limit of 5 ng mL⁻¹. The precision of the method, expressed as relative standard deviation, ranged between 2.1% and 4.5%. After a sample treatment consisting on a conventional extraction, the method was applied to the determination of DNA in several samples from different biological materials.     

硫酸铜能否加快氢气生成速率实验探究

旨在搞清CuSO4能否加快氢气生成速率,基于反应液质量递减法测定单位时间内氢气生成量,并用于反应速率表述。结果表明,CuSO4能否加快氢气生成速率取决于单质锌的形态。锌粒与CuSO4联用有利于氢气制备。     

微乳凝胶中小分子传质研究

微乳凝胶中小分子传质研究对于拓宽胶束酶学研究内涵、加速酶在生物合成与转化领域中的应用、研制高性能生物传感器等具有重要理论意义和潜在应用价值.以微乳液中二价金属离子与紫脲酸胺之间的配位反应为指示反应,采用分光光度技术,研究了金属离子在由阳离子表面活性剂十六烷基三甲基溴化胺构建的微乳凝胶中的传质问题.结果表明,在由含紫脲酸胺微乳液及含金属离子微乳凝胶构成的体系中,金属离子在微乳凝胶中的传质是金属离子与紫脲酸胺配位反应的限速步骤.为进一步证实上述结论,还对影响金属离子在微乳凝胶中传质的各种因素(如微乳液中水与表面活性剂的摩尔比值、分散相中甘油与水的配比等)进行了研究,结果也证实了上述结论.     

Enantioselective Pd‐Catalyzed Allylic Alkylation Reactions of Dihydropyrido[1,2‐a]indolone Substrates: Efficient Syntheses of (−)‐Goniomitine, (+)‐Aspidospermidine,and (−)‐Quebrachamine

The successful application of dihydropyrido[1,2‐a]indolone (DHPI) substrates in Pd‐catalyzed asymmetric allylic alkylation chemistry facilitates rapid access to multiple alkaloid frameworks in an enantioselective fashion. Strategic bromination at the indole C3 position greatly improved the allylic alkylation chemistry and enabled a highly efficient Negishi cross‐coupling downstream. The first catalytic enantioselective total synthesis of (?)‐goniomitine, along with divergent formal syntheses of (+)‐aspidospermidine and (?)‐quebrachamine, are reported herein.     

A Conjugate Addition Approach to Diazo-Containing Scaffolds with β Quaternary Centers

Structurally complex diazo-containing scaffolds are formed by conjugate addition to vinyl diazonium salts. The electrophile, a little studied α-diazonium-α,β-unsaturated carbonyl compound, is formed at low temperature under mild conditions by treating β-hydroxy-α-diazo carbonyls with Sc(OTf)₃. Conjugate addition occurs selectively at the 3-position of indole to give α-diazo-β-indole carbonyls, and enoxy silanes react to give 2-diazo-1,4-dicarbonyl products. These reactions result in the formation of tertiary and quaternary centers, and give products that would be otherwise difficult to form. Importantly, the diazo functional group is retained within the molecule for future manipulation. Treating an α-diazo ester indole addition product with Rh₂(OAc)₄ caused a rearrangement to occur to give a 2-(1H-indol-3-yl)-2-enoate. In the case of diazo ketone compounds, this shift occurred spontaneously on prolonged exposure to the Lewis acidic reaction conditions.     

Preparation and properties of water‐absorbent composites of chloroprene rubber,starch, and sodium acrylate

The effects of the amounts of starch, sodium acrylate (NaAA) and dicumyl peroxide (DCP) on the properties of chloroprene rubber (CR)/starch/NaAA composites prepared by melting method were investigated. The results showed that the addition of starch improved the mechanical properties, but decreased the water‐absorbing capacity of the composite, most likely due to the decrease in the local concentration of the main water‐absorbing material sodium polyacrylate and the increase in crosslinking density of the composite resulting from the reaction between starch and CR. This reaction was verified by the vulcanized curves, DSC curves, and the cut surface morphology. The as‐prepared composite demonstrated higher water‐absorbing capacity, resulting from the incorporation of NaAA. The mechanical properties decreased with increasing the DCP loading, and the water‐absorbing ratio is the maximum at 1.0 phr DCP. The tensile strength of the composite decreased significantly after water immersion, due to the absorbed water acting as a plasticizer. The extracted component from composites after water immersion is mainly sodium polyacrylate according to Fourier transform infrared (FT‐IR) spectroscopy analysis. The morphology of the composites before and after water immersion was observed by optical transmission microscopy (OTM). The results indicated that the starch exhibits a good dispersion state, and the water‐absorbing capacity results primarily from sodium polyacrylate. Copyright © 2010 John Wiley & Sons, Ltd.     

Triblock copolymers based on cyclic ethers: Preparation and properties of tetrahydrofuran and 3,3-bis(azidomethyl) oxetane triblock copolymers

Novel energetic thermoplastic elastomers (TPEs) based on tetrahydrofuran (THF) and 3,3-bis (azidomethyl) oxetane (BAMO) were prepared in this present study by cationic living polymerization. A bifunctional catalyst, triflic anhydride [(CF₃SO₂)₂)O] was selected to be an initiator for the polymerization THF and BAMO. The resulting polymers were characterized by IR, NMR, and DSC, which demonstrated that triblock copolymers with A-B-A type were formed. The polymers were indicated from thermogravimetric analysis (TGA) to have decomposed at approximately 243°C. The decomposition enthalpies were determined by DSC. These enthalpies were varied with the poly-BAMO contents of the copolymers. The synthesized polymers exhibited relatively good mechanical properties and thermoplastic characteristics at room temperature. © 1994 John Wiley & Sons, Inc.     

Determination of quaternary alkylammonium compounds by capillary zone electrophoresis and indirect UV detection as a real alternative to ion chromatography with suppressed conductivity detection

A capillary electrophoretic (CE) method for the determination of residual mid-chain alkyltrimethylammonium compounds in the pharmaceutical product Welchol™ (an alkylated, crosslinked polyallylamine) was developed, validated and compared with the existing ion chromatographic (IC) method with suppressed conductivity detection. Excellent reproducibilities of migration times (RSD<0.5% within a series of 55 sample injections) and relative peak areas (RSD<2%) make the method suitable for quality control as a real alternative to IC. Limits of quantification of 0.01% w/w of each impurity in the active substance were achieved. Buffer systems for indirect UV detection based on creatinine as visualization reagent with different inorganic and organic acids (phosphoric, sulfuric, formic, acetic, oxalic and citric acid) and their effect on selectivity to ten quaternary ammonium compounds were studied. Selectivity changes were observed for the di- and trivalent analytes depending on the buffer applied. Also, the influence of acetonitrile, methanol, 1,4-dioxane and tetrahydrofuran on selectivity was investigated. In addition, CE–MS experiments were carried out in order to identify several impurities in the product.