A Self‐Sampling‐and‐Flow Biosensor for Continuous Monitoring

A self‐sampling‐and‐flow biosensor was fabricated by sandwiching a nitrocellulose strip on the working electrode side of the double‐sided microporous gold electrodes and a wicking pad on the counter electrode side. The double‐sided microporous electrodes were formed by plasma sputtering of gold on a porous nylon substrate. Sample was taken up to the enzyme‐immobilized working electrode by the capillary action of the front nitrocellulose strip dipped into the sample solution, analyzed electrochemically at the enzyme‐immobilized electrode, and diffuses out to the backside wicking pad through the micropores of the electrodes, constituting a complete flow cell device with no mechanical liquid‐transporting device. Biosensor was formed by co‐immobilizing the glucose oxidase and electron transfer mediator (ferrocene acetic acid) on the thioctic acid self‐assembled monolayer‐modified working electrode. A typical response time of the biosensor was about 5 min with the sensitivity of 2.98 nA/mM glucose, providing linear response up to 22.5 mM. To demonstrate the use of self‐sampling‐and‐flow biosensor, the consumption rate of glucose in the presence of yeast was monitored for five days.     

Some aspects of quality assessment of the k0-based method of NAA

Neutron activation analysis is one of the analytical techniques often used for certification of reference materials. The k₀-based method of instrumental neutron activation analysis can also be applied in intercomparison runs in the certification process and therefore it is desirable to know its accuracy in advance. Possible systematic errors related to the application of nuclear data at given neutron flux rate parameters, that can affect the uncertainties of the results obtained by this specific method, are elucidated and error propagation factors calculated for a typical irradiation position in the TRIGA Mark II reactor of the Jozef Stefan Institute. It was found that these uncertainties are at the level of 1–2% on the average.     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer

Thermal degradation studies of a stabilized HTPB based elastomer were conducted at temperatures from 50 °C to 110 °C. The concentration of extractable antioxidant (AO2246) in the polymer was quantified via AO extraction and a gas chromatography-based method using internal standards. The decrease in extractable AO levels as a function of time and temperature was evaluated and correlated with mechanical property changes. Most importantly, AO depletion features were found to be temperature dependent. At elevated temperatures (>80 °C) extractable AO levels decreased rapidly and faster than the concurrent loss in mechanical properties. While extractable AO concentrations decrease quickly, the material is able to maintain some useful mechanical properties, perhaps via non-extractable or grafted AO species formed during degradation providing additional protection. At lower aging temperatures extractable or free AO levels decreased more slowly than the mechanical properties. Therefore, for condition monitoring purposes a universal correlation between AO levels and aging state or material condition could not be established. Most importantly, however, loss of mechanical properties and oxidative degradation is observed at lower temperatures despite significant levels of free antioxidant in the material. The antioxidant appears to be limited in its effectiveness to completely prevent degradation reactions, or only fractions of the total AO available are actually involved in the inhibition process.     

指纹图谱法在参麦注射液质控中的应用

 中医药理论和实践要求综合评价中药的质量 ,指纹图谱法是对中药制剂进行综合宏观分析的可行手段之一 ,因此采用反相高效液相建立了参麦注射液的特征指纹图谱。条件 :Hypersil C18(4 6mmi d × 2 5 0mm ,5 μm)反相柱 ,流动相由水 (A)和乙腈 (B)组成 ,B的体积分数在 5 0min内由 5 %线性增长到 95 % ,流速为1 0mL/min ;紫外检测 ,波长为 2 0 2nm。 2 3个特征指纹峰与内标 (联苯 )的峰面积比作为指标 ,结合主成分分析 投影判别法比较了同一厂家不同批次产品和不同厂家同类产品的化学指纹差异。     

Blood lead monitoring in Italy: Assessment of the quality of results obtained between 1992 and 1994

Between 1992 and 1994, a new screening campaign for blood Pb monitoring in the Italian general population was carried out. Since the first campaign (started in 1978, in accomplishment of the European Community Directive 77/312/EEC) a working group of the Laboratory of Clinical Biochemistry at the Italian National Institute of Health (Istituto Superiore di Sanità), as the Reference Centre (RC), has coordinated the activity of various laboratories spread over the national territory. Appropriate quality assurance procedures, including an external quality assessment scheme (EQAS), were elaborated. Within the EQAS, three or four trials were carried out every year. Each laboratory participating in the trial analyzed eight control samples prepared from cow blood at different Pb concentrations. The results obtained by each peripheral laboratory and the RC between 1992 and 1994 have been compared by regression analysis. The same statistical method was adopted to compare the results obtained by each peripheral laboratory and the RC in the duplicate analysis of about 10 per cent of the human samples collected during the 1992–1994 monitoring campaign. There was no evidence of systematic differences between the regression lines obtained on control and human samples. In spite of the lower Pb concentration in the control samples analyzed during the 1992–1994 campaign, the analytical performance of the laboratories was better than that obtained in the previous screening campaign (1985–1986). Blood Pb levels observed in human samples collected between 1992 and 1994, confirm the downward time trend observed in the campaigns carried out in 1978–1979, 1980–1981 and 1985–1986. This study confirms that the results obtained in an EQAS are representative of the actual performance in the analysis of real (human) samples.     

基于聚类分析的初三化学学业质量发展研究

以2013-2016年广州市各区（县级市）中考化学成绩的4种数据为指标，运用聚类分析研究广州市区域初三化学学业质量的发展状况。研究发现各区（县级市）主要分为3大类，部分区在不同年份的类别中移动，倾向于建立一个包括越来越多区域的第1大类。广州市区域初三化学学业质量逐步向优质均衡发展。系统的中学生化学探究活动和化学教师研训活动是实现这一发展的重要原因。     

Explorative data analysis of two-dimensional electrophoresis gels

Methods for classification of two-dimensional (2-DE) electrophoresis gels based on multivariate data analysis are demonstrated. Two-dimensional gels of ten wheat varieties are analyzed and it is demonstrated how to classify the wheat varieties in two qualities and a method for initial screening of gels is presented. First, an approach is demonstrated in which no prior knowledge of the separated proteins is used. Alignment of the gels followed by a simple transformation of data makes it possible to analyze the gels in an automated explorative manner by principal component analysis, to determine if the gels should be further analyzed. A more detailed approach is done by analyzing spot volume lists by principal components analysis and partial least square regression. The use of spot volume data offers a mean to investigate the spot pattern and link the classified protein patterns to distinct spots on the gels for further investigation. The explorative approach in analysis of 2-D gels makes it possible, in a fast and convenient way, to screen many gels in order to determine the protein patterns that form clusters and could be selected for further examination.     

Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

The American (USA) perspective six years after implementation of CLIA'88 (Federal) regulations

 On September 1, 1992 all testing sites in the United States were required to comply with the Clinical Laboratory Improvement Amendments of 1988 (CLIA'88). These regulations, based on both total quality management (TQM) and continuous quality improvement (CQI) principles, reshaped the environment for more than 90% of laboratories. CLIA'88 represented a revolutionary change by imposing universal, uniform regulations based on test complexity for all sites examining materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of disease. CLIA'88 specifies minimum requirements for personnel, quality control, and proficiency testing (PT). In addition, laboratories are required to follow manufacturers' directions and comply with other specified good laboratory practices. PT is mandated for most of the frequently run analyses and quality assurance requirements integrate the principles of CQI as well as TQM into the regulatory process. Biannual inspection is integral to CLIA'88, however, laboratories can choose other federally approved ("deemed") professional organizations, such as the Commission on Office Laboratory Accreditation, the College of American Pathologists, or the Joint Commission on Accreditation of Healthcare Organization, having standards that meet or exceed those of CLIA'88. CLIA'88 has still not been finalized. This article discusses the impact and changes since CLIA's implementation in 1992. Received: 5 October 1998 · Accepted: 20 October 1998