Synthesis and characterization of new oligosilane derivatives of iron and molybdenum

By use of salt elimination, the transition metal substituted oligosilanes (η⁵-C₅Me₄Et)Fe(CO)₂SiMe₂SiMe₂Cl 1, (η⁵-C₅Me₄Et)Mo(CO)₃SiMe₂SiMe₂Br 2, (η⁵-C₅Me₄Et)Fe(CO)₂(SiMe₂)₆(CO)₂Fe(η⁵-C₅Me₄Et) 3 and (η⁵-C₅Me₄Et)Fe(CO)₂(SiMe₂)₆Br 4 were prepared and characterized. Compound 1 is well crystallized from pentane and its structure has been determined by X-ray diffraction analysis.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

p—Si上电沉积Ni—W—P薄膜的结构与热稳定性

研究了ｐ－Ｓｉ上恒电流沉积Ｎｉ－Ｗ－Ｐ合金薄膜组成与结构的关系，讨论了镀层的组成、结构随沉积时间的变化．测定了非晶合金的晶体结构随热处理温度的改变以及ＤＴＡ曲线，结果表明，非晶Ｎｉ－Ｗ－Ｐ合金在晶化过程中形成两个纳米超微晶相，非晶Ｎｉ－Ｗ－Ｐ薄膜的热稳定性远高于通常使用的非晶Ｎｉ－Ｐ薄膜．     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

Structural materials: metal-silicon-Boron. The Nb-rich corner of the Nb-Si-B system

Phase equilibria in the Nb-Nb₅Si₃-NbB region were studied in the melting (crystallization) range by means of light microscopy, XRD, SEM and EMPA on alloys after arc-melting and annealing at 1800°C and at subsolidus temperatures. Phase transition and melting temperatures were determined by DTA and pyrometric Pirani-Alterthum technique resulting in a solidus projection and two isopleths, Nb₇₇Si₂₃-Nb₇₇B₂₃ and Nb₉₉Si₁-Nb₅Si₂B. The T₂-phase Nb₅Si_3−xB_x (0?x?2, Cr₅B₃-type) was found to form equilibria with (Nb), NbB, Nb₃Si, and with the T₁-phase (Mn₅Si₃ derivative type). The T₂-phase melts incongruently (Nb₅Si_1.8B_1.2 at 2245°C) and forms a quasibinary eutectic with the niobium solid solution on a minimum tie-line at ∼1880°C.     

XRD-Studies of SiC/Si layers on carbon substrates

Structural investigations of thin films of SiC, SiC with free silicon and various titanium suicides (TiSi₂, TiSi and Ti₅Si₃) are described. The crystal phases have been identified using X-ray diffractometry. The growth of reaction products from surface reactions between silicon and deposited titanium can be observed.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

Silicon carbide nanotubes and nanotubular fibers: Synthesis, stability, structure, and classification

Published data on silicon carbide nanotubes (SiC-NT) are analyzed. According to theoretical calculations, single-layer SiC-NTs do not dissociate, but they have not yet been detected experimentally. According to the experimental data, metastable SiC-NTs with walls consisting of several layers and nanotube fibers were produced. The optimized structure of single-layer SiC-NTs was calculated by the RHF/6-31G quantum-chemical method. The possibility of obtaining SiC-NTs by gas-phase chemical deposition from methyltrichlorosilane in the temperature range of 800–1000 °C was investigated. Nanofibers and polygrained SiC nanotubes were obtained, but ordinary layer SiC nanotubes were not detected. To remove the inconsistencies it was first proposed to classify the nanotubes according to the structure of their walls, separating all the SiC-NTs into three types: 1) ordinary layer nanotubes with rolled layers, similar to carbon nanotubes; 2) polynanocrystalline nanotubular fibers or nanotubes with walls consisting of linked differently oriented nanograins; 3) monocrystalline synthetic nanotubes with ideal crystalline walls. It was concluded that the ordinary SiC-NTs of the first type are unstable with the exception of one-or two-layer nanotubes; stable SiC-NTs of the first type and SiC-NTs of the third type have not yet been discovered; only nanotubular fibers of the second type were obtained experimentally. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 3–13, January–February, 2006.