有序排列PMMA 模板法合成三维有序纳米孔道MgO

"利用由无乳化剂的乳液聚合法和水浮法联用技术合成得到的有序排列的聚甲基丙烯酸甲酯(PMMA)微球为硬模板,以硝酸镁为镁源,并采用硝酸镁-柠檬酸-乙醇混合溶液浸渍PMMA微球后经干燥以及先后在300 ℃恒温灼烧3 h和500 ℃恒温灼烧5 h,制备出具有有序纳米孔道结构的MgO粒子．应用X射线衍射、高分辨扫描电子显微镜、透射电子显微镜/选区电子衍射以及N2吸附-脱附法等技术表征了PMMA和MgO样品的物理化学性质．结果表明,所得PMMA微球颗粒较为均匀,粒径约为284 nm,且排列规整有序．由PMMA硬模板     

气体和气溶胶在多孔介质中迁移的数值模拟

为了研究多孔介质对气体和气溶胶的封闭能力,用数值方法模拟了气体和气溶胶在多孔介质中的迁移.考虑了渗透、吸附过滤、扩散、热传导等因素,在柱对称坐标下用双孔双渗模型进行了数值模拟,并与实验结果进行了比较.计算结果显示,多孔介质对气溶胶有较强的阻挡作用,模拟实验结果也证明了这一点.     

Dielectric resonances in disordered media

Binary disordered systems are usually obtained by mixing two ingredients in variable proportions: conductor and insulator, or conductor and super-conductor. They present very specific properties, in particular the second-order percolation phase transition, with its fractal geometry and the multi-fractal properties of the current moments. These systems are naturally modeled by regular bi-dimensional or tri-dimensional lattices, on which sites or bonds are chosen randomly with given probabilities. The two significant parameters are the ratio h = σ ₁/σ of the complex conductances, σ and σ ₁, of the two components, and their relative abundances p (or, respectively, 1 - p). In this article, we calculate the impedance of the composite by two independent methods: the so-called spectral method, which diagonalises Kirchhoff's Laws via a Green function formalism, and the Exact Numerical Renormalization method (ENR). These methods are applied to mixtures of resistors and capacitors (R-C systems), simulating e.g. ionic conductor-insulator systems, and to composites constituted of resistive inductances and capacitors (LR-C systems), representing metal inclusions in a dielectric bulk. The frequency dependent impedances of the latter composites present very intricate structures in the vicinity of the percolation threshold. In this paper, we analyse the LR-C behavior of compounds formed by the inclusion of small conducting clusters (“n-legged animals”) in a dielectric medium. We investigate in particular their absorption spectra who present a pattern of sharp lines at very specific frequencies of the incident electromagnetic field, the goal being to identify the signature of each animal. This enables us to make suggestions of how to build compounds with specific absorption or transmission properties in a given frequency domain. Received 16 August 2002 Published online 14 February 2003 RID="a" ID="a"e-mail: laurent.raymond@l2mp.fr RID="b" ID="b"e-mail: steffen.schaefer@l2mp.fr RID="c" ID="c"UMR CNRS 6137     

少子寿命和表面形貌与多孔硅发光性能的关系

研究了不同时间腐蚀的多孔硅的光致发光性能与多孔硅的表面形貌和少子寿命之间的关系。结果表明,多孔硅的发光来自与氧空位有关的缺陷,而多孔硅表面的氢原子能够钝化多孔硅表面的非辐射中心从而提高多孔硅的发光效率。多孔硅的空隙度随腐蚀时间的延长而增大,这也导致了多孔硅的少子寿命的降低,从而造成多孔硅的光致发光效率随多孔硅空隙度的增大以及少子寿命的降低而提高。另外,原子力显微照片表明长时间的腐蚀使多孔硅表面层被化学腐蚀,从而降低了多孔硅表面的粗糙度。     

周期性边界条件下多孔介质方腔内自然对流换热数值研究

对充满多孔介质的倾斜方腔,在其上下壁面绝热、右侧壁面维持恒温To及左侧壁面温度基于To随时间按正弦规律变化的情况下,采用Brinkman扩展达西模型和SIMPLER算法对方腔内的自然对流与换热进行了非稳态数值模拟,方腔倾角α的范围为0°～90°,Pr数为1,Ra数为106.计算研究不同的振荡频率和方腔倾角对方腔内对流换热的影响.数值模拟结果表明:振荡频率f为60π,方腔倾角为43°时,方腔内的换热最强.     

CPL毛细芯冷凝器的数值模拟研究

本文分析了蒸汽在具有毛细芯结构的冷凝器中的相变冷凝传热与流动特征,采用流体体积函数(VOF:Volume of Fluid)方法建立了数学模型,继而用数值模拟方法,研究了不同的壁面温度以及不同的蒸汽入口速度对冷凝相变界面的影响,文中还对产生影响的原因进行了分析.     

The light-enhanced NO₂ sensing properties of porous silicon gas sensors at room temperature

The NO2 gas sensing behavior of porous silicon(PS) is studied at room temperature with and without ultraviolet(UV) light radiation.The PS layer is fabricated by electrochemical etching in an HF-based solution on a p +-type silicon substrate.Then,Pt electrodes are deposited on the surface of the PS to obtain the PS gas sensor.The NO2 sensing properties of the PS with different porosities are investigated under UV light radiation at room temperature.The measurement results show that the PS gas sensor has a much higher response sensitivity and faster response-recovery characteristics than NO2 under the illumination.The sensitivity of the PS sample with the largest porosity to 1 ppm NO2 is 9.9 with UV light radiation,while it is 2.4 without UV light radiation.We find that the ability to absorb UV light is enhanced with the increase in porosity.The PS sample with the highest porosity has a larger change than the other samples.Therefore,the effect of UV radiation on the NO2 sensing properties of PS is closely related to the porosity.     

Luminescence properties of anodic aluminum oxide films with organic luminophores embedded into pores

Luminescence properties of porous anodic aluminum oxide films formed in a 0.6 M solution of citric acid and luminescence of paraterphenyl, perylene, coumarin 7, and rhodamine 6G dyes adsorbed by the films are investigated. The nature of emitting centers in anodic aluminum oxide is revealed. Intense photoluminescence of all tested dyes embedded into pores of anodic aluminum oxide has been found. A redshift of fluorescence spectra of dyes adsorbed by the matrix and emergence of an additional longwave band have been detected. Data obtained can be used in developing new thin-film luminescent coatings for future applications in optoelectronics and molecular electronics. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No 4, pp. 483–488, July–August, 1997.     

溶胶-凝胶法制备纳米多孔SiO2薄膜

以正硅酸乙酯(TEOS)为原料，采用旋转涂敷的方法，结合溶胶-凝胶技术在硅衬底上制备超低介电常数多孔SiO₂薄膜.采用两种不同的改性方法对薄膜表面进行改性，傅里 叶变换红外光谱分析发现改性后薄膜中含有大量的—CH₃键，从而减少了孔洞塌陷.用扫 描电子显微镜观察薄膜的表面形貌，发现薄膜内孔洞尺寸在70—80 nm之间.调节溶胶pH值，发现pH值越小凝胶时间越长.对改性样品热处理的结果表明，在300 ℃时介电常数最低达2.05. 关键词： 2')" href="#">多孔SiO₂ 低介电常数 溶胶-凝胶     

建筑构件内瞬态热湿分析中的多层求解方法

提出了一种求解一维多层建筑构件内瞬态耦合传热传质问题的有限差分逼近方法.求解过程中认为构件的内外表面处的热湿传递为瞬态过程,并考虑了多层墙体每一层物性参数的非连续性,从而避免了通常处理中边界条件设定为常数给计算带来的误差.利用该方法对典型的三层墙体层与层界面处相对湿度在24小时内的变化进行了计算,计算结果与文[6]的传递函数求解方法符合很好,可推广应用到对二维和三维耦合传热传湿问题的求解.