Rapid detection of Staphylococcus aureus by a combination of monoclonal antibody-coated latex and capillary electrophoresis

The rapid detection of pathogenic bacteria is extremely important in biotechnology and clinical diagnosis. CE has been utilized in the field of bacterial analysis for many years, but to some extent, simultaneous separation and identification of certain microbes from complex samples by CE coupled with UV detector is still a challenge. In this paper, we propose a new strategy for rapid separation and identification of Staphylococcus aureus (S. aureus) in bacterial mixtures by means of specific mAb-coated latex coupled with CZE. An appropriate set of conditions that selectively isolated S. aureus from the microorganisms Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae were established. S. aureus could be differentiated from the others by unique peaks in the electropherograms. The validity was also confirmed by LIF with antibodies specific to both the latex and the microbial cells. The LOD is as low as 9.0 x 10(5) colony forming unit/mL. We have also utilized this technology to identify S. aureus in a stool sample coming from a healthy volunteer spiked successfully with S. aureus. This CZE-UV technique can be applied to rapid diagnosis of enteritis caused by S. aureus or other bacterial control-related fields needing rapid identification of target pathogens from microbial mixtures. In theory, this method is suitable for the detection of any bacterium as long as corresponding bacterium-specific antibody-coated latex is available.     

Rapid characterization of Bacillus spores targeting species-unique peptides produced with an atmospheric pressure matrix-assisted laser desorption/ionization source

New and improved strategies are eagerly sought for the rapid identification of microorganisms, particularly in mixtures. Mass spectrometry remains a powerful tool for this purpose. Small acid-soluble proteins (SASPs), which are relatively abundant in Bacillus spores, represent potential biomarkers for species characterization. Despite sharing extensive sequence homology, these proteins differ sufficiently in sequence for discrimination between species. This work focuses on the differences in sequence between SASPs from various Bacillus species. Compilation of SASP sequences from protein database searches, followed by in silico trypsin digestion and analysis of the resulting fragments, identified several species-specific peptides that could be targeted for analysis using mass spectrometry. This strategy was tested and found to be successful in the characterization of Bacillus spores both from individual species and in mixtures. Analysis was performed using an ion trap mass spectrometer with an atmospheric pressure MALDI source. This instrumentation offers the advantage of increased speed of analysis and accurate precursor ion selection for tandem mass spectrometric analysis compared with vacuum matrix-assisted laser desorption/ionization and time-of-flight instruments. The identification and targeting of species-specific peptides using this type of instrumentation offers a rapid, efficient strategy for the identification of Bacillus spores and can potentially be applied to different microorganisms.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.     

Bacterial response to eukaryotic cells. Analysis of differentially expressed proteins using nano liquid chromatography-electrospray ionization tandem mass spectrometry

Host-bacteria interactions have mostly been investigated with regard to the host response or to activities of pathogenic bacteria. In contrast, we aim to identify reactions of non-pathogenic bacteria that result from their contact with host cells of the gastrointestinal tract. In a proteomic approach, the response of non-pathogenic human Escherichia coli bacteria on gut epithelial cells (rat IEC-6) was investigated in an in vitro co-culture model. For this purpose, a sensitive analytical procedure was developed based on the identification of two-dimensional polyacrylamide gel electrophoresis separated proteins by online nanoLC-electrospray ionization MS/MS using a quadrupole time-of-flight tandem mass spectrometer for accurate mass determination. We demonstrate here the efficiency of this technique by the identification of a total of 43 differentially expressed proteins, out of which 25 were up-regulated and 18 were down-regulated. They represent a wide range of molecular weight and different metabolic and physiological functions.     

Multiple-locus variable number tandem repeats analysis for genetic fingerprinting of pathogenic bacteria

DNA fingerprinting has attracted considerable interest as means for identifying, tracing and preventing the dissemination of infectious agents. Various methods have been developed for typing of pathogenic bacteria, which differ in discriminative power, reproducibility and ease of interpretation. During recent years a typing method, which uses the information provided by whole genome sequencing of bacterial species, has gained increased attention. Short sequence repeat (SSR) motifs are known to undergo frequent variation in the number of repeated units through cellular mechanisms most commonly active during chromosome replication. A class of SSRs, named variable number of tandem repeats (VNTRs), has proven to be a suitable target for assessing genetic polymorphisms within bacterial species. This review attempts to give an overview of bacterial agents where VNTR-based typing, or multiple-locus variant-repeat analysis (MLVA) has been developed for typing purposes, together with addressing advantages and drawbacks associated with the use of tandem repeated DNA motifs as targets for bacterial typing and identification.     

趋磁性细菌-磁场处理含镍废水的研究

应用趋磁性细菌-磁场技术处理Ni2 废水.首先进行了趋磁性细菌吸附试验,研究了pH、温度、时间、微生物量对吸附的影响.其次进行了趋磁性细菌的分离试验,考查了磁分离器中金属丝框的位置和磁场强度对磁分离过程的影响.试验结果表明,经这种方法处理后,出水中镍离子浓度很低.     

Thermal Denaturation of Bacterial Cells Examined by Differential Scanning Calorimetry

Thermal stability of vegetative cells of Listeria monocytogenes, Escherichia coli and Lactobacillus plantarum was studied by counting viable fractions and determining DSC curves of their suspensions. DSC curves in the 5–99°C range showed a series of endothermic transitions between 50 and 60°C, where the heat destruction of cells occurred. Heat denaturation of DNA required a higher temperature than cell killing. Thermal death was strongly influenced by the pH, composition and NaCl content of the suspending buffer. A mathematical model developed by us enabled comparison of DSC peak temperatures and temperatures required for loss of viability.This revised version was published online in November 2005 with corrections to the Cover Date.     

Changes in fungal and bacterial populations in soil treated with two triorganotin(IV) compounds

The effects of two triorganotin(IV) compounds, diphenylbutyltin bromide (Ph₂BuSnBr) and triphenyltin chloride·triphenylphosphine oxide (Ph₃SnCl·Ph₃PO), on soil bacterial and fungal populations were compared with that of Thiram and the commercial triorganotin fungicide ‘Brestan’ (triphenyltin acetate, Ph₃SnOAc). Soil fungal populations were reduced most by Thiram, then by Ph₃SnCl·Ph₃PO, Ph₂BuSnBr and Ph₃SnOAc, in that order. Following the application of the compounds, there was a marked increase in the bacterial population in soil, the increase being greatest with Thiram and least with Ph₃SnCl·Ph₃PO. The triorganotin(IV) compounds were less harmful to soil fungi than Thiram. In Thiram-treated soil, recolonization was slower than in soil treated with the triorganotin(IV) compounds. More species of fungi were tolerant to and persisted after application of the triorganotin(IV) compounds compared with Thiram. Among the fungi that were tolerant to the triorganotin(IV) compounds were cellulolytic species such as Trichoderma.