静电自组装制备纳米TiO2/SiO2光催化材料

采用静电自组装方法制备了纳米TiO2/SiO2光催化材料。采用巯丙基三甲氧基硅烷偶联剂对SiO2进行干法改性,采用双氧水/冰醋酸将偶联剂巯基基团氧化为磺酸基基团。在正负电荷的吸引下,带负电荷的SiO2与带正电荷的钛聚合阳离子自发地组装在一起,经一定温度热处理得到纳米TiO2/SiO2光催化材料。采用XRD、FTIR、PL、UV-Vis DRS、SEM和ICP等对材料进行了分析和表征。采用甲基橙溶液评价材料的光催化性能。结果表明:SiO2促使锐钛矿的形成,抑制锐钛矿向金红石的转变,减小TiO2的晶粒尺寸,使得TiO2光吸收波长发生蓝移。TiO2与SiO2通过Si-O-Ti键发生结合。采用静电自组装方法制备的材料中TiO2的含量高于传统方法,导致材料的光催化性能有所提高。     

TiO2-CoFe2O4磁性复合材料制备及太阳光催化性能

以四氯化钛、三价铁盐和二价钴盐为前驱体,采用超声波技术一步合成了TiO2-CoFe2O4新型复合光催化剂,运用VSM、XRD、TEM和UV-Vis技术进行了表征,以甲基橙为模拟污染物在太阳光照射下研究其光催化活性。结果表明:所制得的样品具有良好的顺磁性,其饱和磁化强度为212 Gs;样品中TiO2和CoFe2O4分别以锐钛矿相和尖晶石结构存在,粒径尺寸在40～50 nm之间;样品在紫外-可见区有很强的吸收。光催化结果表明复合催化剂具有较高的太阳光催化活性,循环使用3次,仍能保持良好的催化活性。     

Zinc oxide nanoparticles reinforced conducting poly(aniline-co-p-phenylenediamine) nanocomposite

Zinc oxide (ZnO) nanoparticles were synthesized by thermal decomposition method and formation of composite with conducting copolymer via in situ chemical oxidative polymerization. Transmission electron microscopy showed that the nanoparticles with an average diameter of 15–25?nm were dispersed in the copolymer matrix. The comonomer molecules were adsorbed on the surface of ZnO particles and then polymerized to form core–shell nanocomposite. The obtained nanocomposite showed a significant improvement in the thermal behavior as indicated by thermogravimetric analysis. The nanocomposite was also confirmed by Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, and X-ray diffraction. Room temperature conductivity of nanocomposite was higher than the value obtained for the pure copolymer. Photocatalytic activity of the nanocomposite was evaluated by measuring the degradation of methylene blue dye under UV irradiation.     

第一性原理研究Eu/N共掺杂锐钛矿TiO2光催化剂的电子和光学性质

基于密度泛函理论的第一性原理平面波赝势方法, 运用Vasp方法计算了Eu, N掺杂及Eu/N共掺杂锐钛矿TiO₂的结构, 并分析了其电子及光学性质. 通过计算发现有一些Eu的4f态电子在Eu掺杂锐钛矿TiO₂的体系的费米能级附近出现杂质能级, 并且N掺杂会使得锐钛矿TiO₂的禁带宽度减小. 对于共掺杂体系而言, Eu/N共掺杂的协同效应能导致锐钛矿TiO₂的晶格畸变及禁带宽度减小. 与此同时, 计算得到的光吸收谱表明Eu/N混合掺杂锐钛矿TiO₂展现出了明显的光谱吸收边缘红移. 这些计算结果表明Eu/N共掺杂锐钛矿TiO₂具有优良的光催化活性. 关键词： 2')" href="#">TiO₂ 共掺杂 可见光催化剂 密度泛函理论     

A Polypyridyl‐Based Layered Complex as Dual‐Functional Co‐catalyst for Photo‐Driven Organic Dyes Degradation and Water Splitting

With the ever‐increasing concerns on environmental pollution and energy crisis, it is of great urgency to develop high‐performance photocatalyst to eliminate organic pollutants from wastewater and produce hydrogen via water splitting. Herein, a polypyridyl‐based mixed covalent Cu^I/II complex with triangular {Cu₃} and rhombic {Cu₂Cl₄} subunits alternately extended by mixed SCN^– and Cl^– heterobridges [Cu₄(DNP)(SCN)Cl₄]_n ( 1 ) [DNP = 2,6‐bis(1,8‐naphthyridine‐2‐yl)pyridine] was solvothermally synthesized and employed as a dual‐functional co‐photocatalyst. Resulting from a narrowed band‐gap of 1.07 eV with suitable redox potential and unsaturated Cu^I/II sites, the complex together with H₂O₂ can effectively degrade Rhodamine B and methyl orange up to 87.4 and 88.2 %, respectively. Meanwhile, the complex mixed with H₂PtCl₆ can also accelerate the photocatalytic water splitting in the absence of a photosensitizer with the hydrogen production rate of 27.5 μmol · g^–1 · h^–1. These interesting findings may provide informative hints for the design of the multiple responsive photocatalysts.     

晶面可控BiOCl光催化剂的制备及其催化反应活性研究

以五水合硝酸铋和氯化钾为原料,通过水热法合成了BiOCl光催化剂,并对其结构进行表征,考察了前驱体的pH对催化剂结构和降解8-羟基喹啉活性的影响。结果表明,随前驱体pH的增加,催化剂[001]晶面暴露程度下降,带隙能减小,且催化反应活性降低,这可归因于低的带隙能和高的光生载流子复合效率。进一步考察降解体系pH对催化剂反应活性的影响,结果表明,降解体系pH影响8-羟基喹啉在催化剂表面的吸附行为,进而影响催化剂的反应活性。     

磺化酞菁铝修饰氨基功能化磁性材料及其光敏化降解双酚A

采用溶剂热法制备氨基功能化Fe_3O_4磁性材料(NH_2@nFe_3O_4),通过浸渍法将磺化酞菁铝(AlPcS)负载于NH_2@nFe_3O_4。材料的傅立叶红外、漫反射、X射线衍射、扫描电镜、透射电镜、振动磁强计等表征表明:AlPcS主要通过静电作用与NH_2@nFe_3O_4结合,AlPcS-NH_2@nFe_3O_4平均粒径为127 nm,饱和磁化强度为75.3 emu·g-1。在可见光和空气作用下,该功能化磁性材料对降解弱碱性水溶液中环境内分泌干扰物双酚A(BPA)具有较高的光敏化活性。随着AlPcS负载量的增加活性呈先升高后下降的趋势,负载量为3.4%(质量分数)的复合材料性能最佳,反应60 min后,20.0 mg·L-1BPA降解率为96%;循环使用10次,BPA降解率仍保持93%以上。通过NaN3猝灭实验探讨了反应机理,证实1O2是光敏化过程中的主要活性物种。     

Preparation of nano-sized platinum metal catalyst using photo-assisted deposition method on mesoporous silica including single-site photocatalyst

Pt particles in a uniform dispersion were successfully synthesized on single-site photocatalyst (Ti-containing mesoporous silica (Ti-HMS)) under UV-light irradiation by a photo-assisted deposition (PAD) method. Using an aqueous solution of H₂PtCl₆ as a precursor, the nano-sized Pt metal particles were deposited directly on the photo-excited tetrahedrally coordinated titanium oxide moieties within the framework of mesoporous silica (PAD-Pt/Ti-HMS). The Pt catalysts were characterized by means of XRD, Pt L_III-edge XAFS, CO adsorption, and TEM analysis. It was demonstrated that Pt particles had mean diameter of 4 nm in a narrow size distribution. Meanwhile, Pt particles loaded by a conventional impregnation method (imp-Pt/Ti-HMS) showed a wide size distribution ranging from 2 to 30 nm. The PAD-Pt/Ti-HMS catalyst was more active in the CO oxidation than the conventional impregnated imp-Pt/Ti-HMS catalyst. It is suggested that the PAD method using single-site photocatalyst is a useful and unique technique to prepare fine and uniform Pt nanoparticles.     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Facile synthesis,characterization, and decolorization activity of Mn2+ and Al3+ co-doped hexagonal-like ZnO nanostructures as photocatalysts

A good photocatalyst with high efficiency can be synthesized easily using eco-friendly materials and processes. Our synthesized samples exhibit all of the aforementioned features. In this work, manganese co-doped ZnO at different weight percentages (3, 6, 9, and 15 wt.%) with and without 1.5 wt.% aluminum was synthesized by hydrothermal method, and their photocatalytic activity in aqueous solutions of methyl orange (MO) was investigated under visible light. The structural and optical properties of the samples were characterized using X-ray powder diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, and diffuse reflectance spectroscopy. In this work, Mn²⁺ ions in the 9%Mn/ZnO sample and Mn²⁺, Al³⁺ ions in the (9%Mn, 1.5%Al)/ZnO sample calcined at 800 °C were replaced instead with some Zn²⁺ ions in hexagonal wurtzite structures of ZnO. These structures were found next to each other in the form of a hexagonal shape that created 3D-hexagonal-like ZnO nanostructures. Finally, nanoparticles (NPs) and nano hexagonal-like ZnO nanostructures were, respectively, dispersed on the surface of 3D-hexagonal-like structure of 9%Mn/ZnO and (9%Mn, 1.5%Al)/ZnO. Diffuse reflectance spectroscopy analysis showed that the (9%Mn, 1.5%Al)/ZnO sample had more light absorption than 9%Mn/ZnO. However, contrary to our expectations, the 9%Mn/ZnO sample had better decolorization efficiency (94%) after 60 min under visible light, which could be attributed to a significant increase in the level of recombination by the aluminum ions.