低渗温热腹腔灌注化疗治疗恶性腹腔积液的临床研究

目的 评价低渗温热腹腔灌注化疗治疗恶性腹腔积液的疗效及不良反应。方法 行腹腔穿刺置单腔中心静脉导管,外接引流袋,记录腹水引流量,当日排放腹水1 500ml 后,予加热至43~45℃注射用双蒸馏水1 000ml 行腹腔灌注,次日重复放液1 500ml,再予加热至43~45℃注射用双蒸馏水1 000ml 行腹腔灌注,并于灌注后腹腔注入顺铂60mg、氟尿嘧啶500mg 并封管,治疗期间常规给予简单水化、对症止吐等治疗。结果 31 例恶性腹腔积液患者共完成低渗温热腹腔灌注化疗42 周期,完全缓解7例,部分缓解15,稳定5 例,进展4 例,完全缓解+ 部分缓解占70.97%。中位进展时间（TTP）3.6个月（2～9 个月）, 中位生存期（MST）5.6 个月。毒副反应以消化道反应为主。结论 低渗温热腹腔灌注化疗治疗恶性腹腔积,在延长患者的生存期、提高生活质量方面效果较好,临床上可推荐应用。     

Water permeability in MXene membranes: Process matters

Recent studies have shown impressive transport behaviors of water and ions within lamellar MXene membranes,which endows great promise in developing advanced separation application based high performance MXene membranes.However,most of the researches focused on modification of MXene nanoflakes and optimizing interlayer distance,leaving the impact of membrane fabrication process marginal.In this work,we studied the water flux of membranes made by vacuum filtration using delaminated MXene nanoflakes as the building-blocks.Our results show that the water permeability is extremely sensitive to the process,especially at the drying process,loading and deposit rate of nanoflakes(the feeding concentration).We find that the voids from less ordered stack rather than in-plane defects and interlayer galleries contribute to the large water permeability.The voids can be effectively avoided via deposition of MXene nanoflakes at a slow rate.Manipulating the stack of MXene nanoflakes during vacuum filtration and drying are critical for development of MXene membranes with desired performance for water permeation.     

PEFC catalyst layers: Effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability

In order to improve the performance and durability of polymer electrolyte fuel cells (PEFCs), various improvements in the microstructures of cathode catalyst layers (CLs) were initiated in the early 1990s. More recent advances in CL materials are highlighted, including carbon supports for improved accessibility of Pt nanoparticles (NPs), adsorption of ionomer on the Pt surface, high-oxygen-permeability ionomers, corrosion resistance of mesoporous and microporous carbons, and conductive ceramic supports with a fused-aggregate network structure. These approaches are summarized as stepwise improvements. The influences of the support structure on the distribution of Pt NPs and ionomer are reviewed, as well as their effects on performance and durability. These approaches for carbon supports are extended to conductive ceramic supports and the unique advantages are discussed.     

Systematic Research and Evaluation Models of Nanomotors for Cancer Combined Therapy

Limited tumor permeability of therapeutic agents is a great challenge faced by current cancer therapy methods. Herein, a kind of near infrared light (NIR)‐driven nanomotor with autonomous movement, targeted ability, hierarchical porous structure, multi‐drugs for cancer chemo/photothermal therapy is designed, prepared and characterized. Further, we establish a method to study the interaction between nanomotors and cells, along with their tumor permeability mechanism, including 2D cellular models, 3D multicellular tumor spheroids and in vivo models. In vivo tumor elimination results verify that the movement behaviour of the nanomotors can greatly facilitate them to eliminate tumor through multiple therapeutic methods. This work tries to establish systematic research and evaluation models, providing strategies to understand the relationship between motion behaviour and tumor permeation efficiency of nanomotors in depth.     

Water sorption and transport in a series of polysulfones

Water sorption and transport properties for a series of polysulfones are presented and interpreted in terms of the changes in the structure of the repeat unit compared to that of bisphenol A polysulfone. The differences between the sorption and diffusion of water and of permanent gases in these materials are also discussed. Water has the ability to interact with the polymer and with itself through hydrogen bonding in a way that permanent gases cannot. The equilibrium solubility of water in the polymer, unlike permanent gases, does not have a simple dependence on free volume but correlates more strongly with the frequency of hydrogen bonding sites on the polymer. Analysis of the sorption isotherms using the method of Zimm and Lundberg suggests that water molecules cluster in these polysulfones to various extents. For each polysulfone except polyethersulfone, the water diffusion coefficient decreases with increasing activity, which also suggests water clustering. For most of these materials, the water diffusion coefficient is larger than that of bisphenol A polysulfone and is directly related to the polymer free volume. Water permeability in these materials broadly correlates with the polymer free volume, but a favorable water-polymer interaction can be an overriding factor. © 1996 John Wiley & Sons, Inc.     

三甲基硅烷基丙炔与五甲基二硅烷基丙炔共聚物膜及其气体透过性

研究了三甲基硅烷基丙块与五甲基二硅烷基丙块共聚物〔poly(TMSP-co-PMDSP)〕的成膜特点。poly(TMSP-co-PMDSP)膜的气体透过系数分别为:P_(O2):4×10~3～12×10~3,P_(N2):3×10~3～8×10~3和P_(CO2):2×10~4～4×10~4barrer,气体透过稳定性低,透过行为偏离第二Fick定律,过系数下降,其中溶解系数降低的比例远大于扩散系数的增加比例,在含有凝聚性气体的环境里,膜的气体透过出现表面吸附控制的特征。     

CO2-水-页岩相互作用的研究现状及展望

简要综述了CO2、水和页岩间矿物的相互作用,分析了CO2注入到地下进入页岩层后,地下含水层pH值的变化,并根据页岩层的矿物学组成分为黏土矿物和脆性矿物,较为详细地描述了CO2与黏土矿物和脆性矿物之间发生的地球化学反应,概述了此反应对页岩层孔隙度和渗透率的影响。同时,也讨论了CO2增强页岩气开采的现实问题及发展趋势,为今后的研究提供了参考。     

High diffusion barrier and piezoelectric nanocomposites based on polyvinylidene fluoride‐trifluoroethylene copolymer and hydrophobized clay

Nanocomposites based on polyvinylidene fluoride–trifluoroethylene copolymer and up to 4 vol % of hydrophobized clay nanoparticles are investigated. The structure, piezoelectric properties, and oxygen permeability of solvent cast films are analyzed before and after annealing above the Curie temperature of the polymer. Exfoliation of the clay takes place at concentrations up to 1 vol %, beyond which it rapidly drops and is absent at a concentration of 4 vol %. The presence of clay does not change the crystallinity of the polymer, but leads to a threefold decrease of the oxygen permeability at a concentration of 0.5 vol %. Annealing at 130 °C increases the crystallinity, the proportion of β phase up to 94%, and the piezoelectric coefficient by 20–40% at clay fractions below 1 vol %. Annealing also leads to a remarkable 3‐ to 10‐fold decrease of O₂ permeability and to intriguing changes of the activation energy for O₂ transport, which decreases from 56 kJ/mol for the as‐cast polymer to below 10 kJ/mol for the polymer and exfoliated composite. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1828–1836     

Triple negative permeability band in plasmon-hybridized cut-wire-pair metamaterials

We expand the picture of plasmon hybridization in metamagnetic structure via numerically studying the electromagnetic coupling in the metallic cut-wire-pair super cells. It is shown that a triple negative permeability band can be achieved by systematically controlling the plasmon hybridization in such the structure. The corresponding transmission properties as well as the electromagnetic responses of the plasmon-hybridized structures were presented by using the finite integration technique simulations. Our results would reveal a promising design to obtain the multiple negative refractions based on the combination of hybridized cut-wire-pairs and continuous wires.