Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

EFFECT OF CHEMICAL STRUCTURE OF SULFOXIDE GRAFTED POLY (VINYL ALCOHOL) ON GAS PERMEABILITY

The effects of chemical structure, i. e. side chain structure and their contents, on thepermeability of pure SO_2, N_2 and their mixture gases for the sulfoxide grafted poly (vinylalcohol) (RVSO-PVA) membranes have been investigated:where R=Me, Et, Pr, t-Bu and Ph. It was notable that introduction of sulfoxide group intoPVA side chain greatly enhanced the permselectivity of sulfur dioxide. SO_2 permeability andseparation factor of these polymers increased markedly as the size of side chain increased. Thesulfoxide content of the polymer also played an important role in the pure and mixture gasespermeation. Some explanations have been made to interpret this unique gas separation behaviour.     

Sulfonated poly(ether ether ketone)/polyaniline composite proton-exchange membrane

Sulfonated poly(ether ether ketone) (PEEK) was prepared by sulfonation of commercial Victrex^@ PEEK and degree of sulfonation was found to be about 44.5% by ¹H NMR. Sulfonated PEEK/polyaniline composite membranes, in order to prevent methanol crossover, were prepared by chemical polymerization of a thin layer of polyaniline (PANI) in the presence of a high oxidant concentration on a single face modification. FTIR and PANI coating density studies confirmed the loading of PANI in sulfonated PEEK membrane matrix. PANI composite membranes with different polymerization time were prepared and subjected to thermogravimetric analysis as well as electrochemical and methanol permeability study to compare with sulfonated PEEK and Nafion 117 membrane. Ion-exchange capacity, water uptake, proton transport numbers and proton conductivities for different PANI composite sulfonated PEEK (SPEEK) membranes were found to be dependent on the coating density of the PANI in the membrane matrix and were slightly lower than that of Nafion 117 membrane. Methanol permeability of these membranes (especially SPEEK/PANI-1.5) was about four times lower than Nafion 117 membrane. Among the all SPEEK membranes synthesized in this study, SPEEK-1.5 appears to be more suitable for direct methanol fuel cell (DMFC) application considering optimum physicochemical and electrochemical properties, thermal stability as well as very low methanol permeability. Above all, the cost-effective and simple fabrication technique involved in the synthesis of such composite membranes makes their applicability quite attractive.     

凝胶型苯乙烯系离子交换树脂的强度及抗渗透性的影响因素研究 (I)

本文就单体组成中不同引发剂，链转移剂，环二烯，烯丙基类化合物和氧气等对凝胶型苯乙烯系阳离子交换树脂的强度和抗渗透性的影响进行了系统研究。结果显示，采用0．30％的过氧化2－乙基己酸叔丁酯（OT）和0．01％的过氧化苯甲酸特丁酯（CP）代替过氧化二苯甲酰（BPO作引发剂，或者加入0．02％的链转移剂十二烷基硫醇，均能够在一定程度上改善共聚物珠粒的结构均匀性，提高其合成的离子交换树脂的磨后圆球率和抗渗透性能。     

Implication of fractal geometry for fluid flow properties of sedimentary rocks

It is demonstrated that a certain amount of order can be extracted from an apparently random distribution of pores in sedimentary rocks by exploiting the scaling characteristics of the geometry of the porespace with the help of fractal statistics. A simple fractal model of a sedimentary rock is built, and is tested against both the Archie law for conductivity and the Carman-Kozeny equation for permeability. We demonstrate how multifractal scaling of pore-volume can be used as a tool for rock characterization by computing its experimentalf() spectrum, which can be modelled by a simple two-scale Cantor set.     

Gas permeability and permselectivity of fluorinated polybenzoxazoles

Gas permeability and permselectivity are investigated for polybenzoxazoles from bis(3-amino-4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane (BAHHP) and aromatic diacid chlorides. Effects of thermal cyclization on the permeation properties are also investigated. The polybenzoxazole from BAHHP and 4,4′-(1,1,1,3,3,3-hexafluoroisopropylidene)dibenzoyl chloride (HFDB) displays high performance for CO₂/CH₄ separation ( $ {\rm P}_{{\rm CO}_2 } $ = 6.1 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, and $ {{{\rm P}_{{\rm CO}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm CO}_2 } } {{\rm P}_{{\rm CH}_4 } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_4 } }} $ = 38 at 35°C). The polybenzoxazole from BAHHP and 2,6-naphthalene dicarbonyl chloride displays high performance for H₂/CO or H₂/CH₄ separation ( $ {\rm P}_{{\rm H}_2 } $ = 2.4 × 10^?9 cm³ (STP) cm^?1 s^?1 cm-Hg^?1, $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CO}} }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CO}} }} $ = 71, and $ {{{\rm P}_{{\rm H}_2 } } \mathord{\left/ {\vphantom {{{\rm P}_{{\rm H}_2 } } {{\rm P}_{{\rm CH}_{\rm 4} } }}} \right. \kern-\nulldelimiterspace} {{\rm P}_{{\rm CH}_{\rm 4} } }} $ = 250). Permeation properties for the polybenzoxazole from BAHHP and HFDB are close to those for a polyimide of similar chemical structure. The permeation properties are discussed in connection with packing density and local segmental mobility. © 1992 John Wiley & Sons, Inc.     

负折射介质中可控自陡峭效应对孤子传输的影响

研究了具有非线性极化的负折射介质中孤子脉冲的传输特性,着重分析了在常规非线性传输模型中不曾出现的由负折射介质色散磁导率导致的可控自陡峭效应对孤子传输的影响.结果表明,与正自陡峭效应一样,负自陡峭效应同样造成孤子脉冲的非对称、中心偏移和高阶孤子衰减,但脉冲偏移的方向与正自陡峭效应情形相反.此外,利用可控自陡峭效应可以从某种程度上抵消三阶色散效应导致的孤子脉冲偏移,从而实现孤子脉冲中心的无偏移传输.     

左手材料设计及透明现象研究进展

左手材料具有负的介电常数, 磁导率和折射率,它与电磁波相互作用的规律与传统材料有本质的区别.首先讨论了金属线点阵结构实现负介电常数和开口谐振环点阵结构实现负磁导率的内在机理,综述了目前实现左手材料的设计与制备方法,讨论了左手材料研究中能量如何定义以满足守恒律, 左手材料的宏观等效参数的确定,以及影响左手材料负折射相对频带带宽的因素。最后对左手材料在光子隧道效应和电磁波透明方面的应用进行了介绍,重点讨论了利用力学中的``中性夹杂'概念对电磁波透明的设计.论文还探讨了声波左手材料的概念和物理意义,介绍了用声波左手材料实现声波透明的方法.      

稠油油藏高温盐析调剖的孔渗表征方法研究

深层高温油藏在开采过程中,由于近井地带压力变化剧烈,地层水蒸发致使结晶盐析出,进而导致储层孔隙度、渗透率降低.为研究稠油油藏高温盐析调剖的孔渗变化规律,根据盐类溶解/沉淀原理及储层孔隙度渗透率关系和填砂管模型高温盐析实验结果,建立了考虑地层水蒸发、水中氯化钠析出和储层孔渗变化的综合盐析模型.研究结果表明:随着堵剂注入量...     

Tb0.3Dy0.7Fe2合金磁畴偏转研究

研究了Tb_0.3Dy_0.7Fe₂合金在压磁和磁 弹性效应中的磁畴偏转和磁导率特性. 基于Stoner-Wolhfarth 模型能量极小原理, 绘制了自由能与磁畴偏转角度的关系曲线, 研究了压应力和磁场载荷作用下磁畴角度的偏转特性, 计算分析了不同载荷作用下磁畴偏转的磁导率特性, 并与实验数据进行比较论证. 研究表明,应力和磁场的作用都将使磁畴方向[111]和[111]发生角度跃迁, 直观有效地解释了材料巨磁致伸缩效应的机理; 应力和磁场作用下磁畴的偏转将使材料磁导率呈减小趋势, 其中磁场能对磁导率的影响大于应力能, 这一现象在小载荷作用下尤为明显. 实验结果表明, 磁导率的计算数据与实验数据符合得较好, 验证了计算方法的正确性. 理论分析对Terfenol-D磁畴偏转模型的完善 和磁化过程中磁滞回线的绘制非常有意义.