灰色关联度进行低产低效井影响因素分析及措施效果增油量预测模型建立

为了确定低产低效影响因素及挖潜措施潜力,利用灰色关联度进行低产低效井影响因素分析,优选出影响产能的主要因素,结合多元线性回归方法与数理统计理论,建立了X油田油井压裂措施增油量预测模型和堵水井降水量预测模型.有机结合油井降水措施和增油措施的经济界限模型,可以准确预测低产低效井压裂增油潜力及堵水降水增油潜力,误差5%-10%以内,有效指导低效低产井再开发.     

页岩裂缝系统产量预测的敏感性研究

考虑气体渗流、解吸附效应、储层压缩性和滑脱效应,建立了页岩裂缝系统产能的全耦合数学模型.采用有限元方法求解基质和裂缝流场,计算结果与已有的研究结果吻合,验证了模型的正确性.在此基础上,分析了裂缝半长、条数、间距等参数对产能的影响以及解吸附效应对产能的作用.结果表明:裂缝参数之间存在相互作用.裂缝半长对产能的影响最大,裂缝条数的优化与裂缝半长有关;在生产中后期,解吸附效应可以提供相当可观的气体产量,对稳定产能有重要意义.该模型可以为页岩压裂设计提供理论指导.     

沿两条内部平行裂纹受压时材料的断裂问题

顺着平面内的平行裂纹受压材料的断裂问题并不能在线性断裂力学的框架内进行描述，Grif-fith－Irvin型或COC型的断裂判据，虽然可以用来处理经典的线性断裂力学，但对本题则完全不适用，这是因为这些压力对应力强度系数没有影响，与裂缝孔隙值也没有关系[1，2]，这一类问题只能采用新的方法，本文的第一作者曾建议过一种新方法，在这一方法中仍然使用了线性关系，但这种线性关系是从变形固体力学中的非线性方程导出的[3，4，5]．这里必须指出，这种方法曾在变形体稳定性问题中广泛地采用过。作为断裂开始的判据，我们采用了裂缝缺陷附近的局部失稳的判据，在这类情况下，我们认为是从失稳过程引发断裂过程的。     

On acoustic and electric waves diffraction in piezoelectric medium by a permeable half-plane crack

The problem of electric and acoustic waves diffraction by a half-plane crack in a transversal isotropic piezoelectric medium is investigated. The crack is assumed to be electric permeable and free of tractions. The so-called “quasi-hyperbolic approximation” [15] is adopted. Applying Laplace transformations and Wiener–Hopf technique a closed form solution is obtained. By the means of Cagniard–de Hoop method a detailed dynamic full electroacoustic wavefield’s investigation is conducted. Mode conversion between electric and acoustic waves, effect of electroacoustic head wave, Bleustein–Gulyaev surface wave and the wavefield structure depending on the type of the incident wave (acoustic or electric) and its angle of incidence are analyzed in details. The dynamic field intensity factors at the crack tip depending on the angle of incidence and on time are derived explicitly. Numerical analysis is presented.     

双材料界面运动Griffith裂纹

本文分析了位于两个拼接的半无限各向同性弹性体界面上的运动Ｇｒｉｆｆｉｔｈ裂纹的应力强因子。     

泡沫铝-复合泡沫冲击韧度及黏弹性分析

泡沫铝-复合泡沫互穿相复合材料是一种新型的结构功能一体化材料,在机械、交通、建筑等领域具有重要的应用前景。本文制备了纯泡沫铝及空心玻璃微珠四种体积分数的泡沫铝-复合泡沫试件,通过摆锤冲击实验研究了其冲击韧度,讨论了其断口形貌与结构性能的关系,通过单轴压缩的应力松弛实验研究其黏弹性性能。研究表明：空心玻璃微珠体积分数为10%的泡沫铝-复合泡沫试件的冲击韧度最大,随后其冲击韧度随空心玻璃微珠体积分数的增加而减小;当空心玻璃微珠体积分数较小时,泡沫铝的结构形貌决定了冲击断口的形貌,但当其体积分数达到30%时,空心玻璃微珠的破坏是形成断口形貌的主要原因;复合材料的黏弹性性能随着玻璃微珠体积分数的增加而增大。     

-196 ℃奥氏体不锈钢母材与焊缝的动态断裂韧性

在-196 ℃对S30408奥氏体不锈钢的母材和焊缝进行了夏比摆锤冲击实验,采用改进的柔度变化率法得到了低温下不锈钢母材夏比试样的起裂点。结果表明,采用改进的柔度变化率法得到的结果比采用传统的柔度变化率法得到的结果更准确。根据实验得到的载荷-位移曲线,结合采用Schindler法和关键曲线法各自所得结果的优点,得到了不锈钢母材的动态裂纹扩展阻力曲线（动态J-R曲线）。依据不锈钢焊缝在低温动载下的载荷-位移曲线及其断裂特征,通过线弹性断裂力学计算获得其动态断裂韧性。     

Tension–torsion fracture experiments – Part II: Simulations with the extended Gurson model and a ductile fracture criterion based on plastic strain

An extension of the Gurson model that incorporates damage development in shear is used to simulate the tension–torsion test fracture data presented in Faleskog and Barsoum (2013) (Part I) for two steels, Weldox 420 and 960. Two parameters characterize damage in the constitutive model: the effective void volume fraction and a shear damage coefficient. For each of the steels, the initial effective void volume fraction is calibrated against data for fracture of notched round tensile bars and the shear damage coefficient is calibrated against fracture in shear. The calibrated constitutive model reproduces the full range of data in the tension–torsion tests thereby providing a convincing demonstration of the effectiveness of the extended Gurson model. The model reinforces the experiments by highlighting that for ductile alloys the effective plastic strain at fracture cannot be based solely on stress triaxiality. For nominally isotropic alloys, a ductile fracture criterion is proposed for engineering purposes that depends on stress triaxiality and a second stress invariant that discriminates between axisymmetric stressing and shear dominated stressing.     

Propagation of a pre-existing turbulent fluid fracture

The propagation of rough and smooth wall pre-existing turbulent fluid fractures is investigated. The laminar fluid fracture is included as a special case for comparison. Lubrication theory is assumed to apply in the fracture and turbulence is introduced through the wall shear stress. The Perkins–Kern–Nordgren approximation is made in which the fluid pressure is proportional to the half-width of the fracture. The fracture half-width satisfies a non-linear diffusion equation. By using a linear combination of the Lie point symmetries of the non-linear diffusion equation a group invariant solution for the fracture length, volume and half-width is derived. The evolution of the length, half-width and mean flow velocity is analysed for a range of working conditions at the fracture entry. It is found that the mean flow velocity increases approximately linearly along the fracture.     

轻质泡沫混凝土的劈裂破坏力学行为分析

利用平台巴西圆盘加载方式和钢质压条加载方式,对两种厚度为25mm和50mm、不同密度的轻质泡沫混凝土(400～1000kg/m3)进行巴西圆盘劈裂试验,研究密度和厚度对泡沫混凝土裂纹宽度、劈裂强度、断裂韧度、断裂能的影响规律。结果表明,在橡胶垫平台巴西圆盘和钢质压条加载方式下,其劈裂断裂特征大致分为四个阶段:线性弹性段、非线性弹性段、起裂阶段、失稳阶段。同样加载率下最大裂纹宽度随着泡沫混凝土密度增加逐渐减小,劈裂拉伸强度、断裂韧度、断裂能呈幂函数形式增加。借鉴Reinhardt非线性软化曲线,对不同密度泡沫混凝土的应力软化关系进行曲线拟合,建立基于拉伸强度、断裂韧度等控制参数的应力-裂纹宽度关系三段式模型。基于试验结果,对理想多孔材料细观力学预测模型进行修正,获得泡沫混凝土孔隙率与拉伸强度的半经验公式。