大庆地区城市污泥中重金属元素含量水平调查与分析

采用原子吸收光谱法和原子荧光光谱法测定了大庆市四座生活污水处理厂污泥中重金属元素含量,平行测定的相对标准偏差在1.6%~4.6%,加标回收率在93.6%~102.1%,表明方法的精密度和准确度都较好,四个污水处理厂污泥中重金属总量大小依次为ZnCuCrPbNiCd,锌的含量高可能与城市排水管道大多采用镀锌材料以及锌的理化性质有关。将其含量水平与标准比较发现:大庆城市污泥中重金属含量水平不高,完全符合《农用污泥中污染物控制标准》的重金属标准,为城市污泥处理、处置和环境管理提供可靠的数据支持。     

钢渣与污泥协同资源化研究进展

钢渣和污泥作为传统大宗固体废弃物,始终面临处理成本高、回收利用率低等问题,但其内部含有大量可利用物质,具有较高的资源化利用价值,现已成为国内外的研究热点。为了提高钢渣与污泥绿色、高效、协同资源化利用,综述了近年来国内外钢渣在建筑、道路、水处理、农业等领域资源化利用的研究进展,立足固废无害化、减量化,从钢渣和污泥的资源化进行分析与总结,指出不同研究方法的特点和优劣,为固废资源化利用提供参考。并基于我国发展现状对钢渣与污泥资源化利用的未来发展方向进行了展望,以期为固废处理行业的良性发展提供一定的理论支撑。     

微波消解-ICP-MS测定电镀污泥中的重金属

采用微波消解系统对某电镀污泥进行消解,利用ICP-MS对污泥中的重金属进行测定。称取制备后样品,置于消解罐中充分反应后,赶酸、定容后利用电感耦合等离子体质谱法进行测定。电镀污泥中的铬为18845.2mg/kg、镉为10.3mg/kg、镍为5200.0mg/kg、铅为189.7mg/kg、铜为3271.7mg/kg、锌为49632.6mg/kg。测定结果表明所检测项目工作曲线线性关系好,相关系数r均大于0.999。铬加标回收率在91.6～97.7%之间、镉加标回收率在92.0～97.0%之间、镍加标回收率在95.1～98.0%之间、铅加标回收率在94.3～95.2%之间、铜加标回收率在97.1～102%之间、锌加标回收率在96.3～98.7%之间,均满足相关测定要求。计算的潜在生态危害系数、潜在生态危害指数结果表明,电镀污泥中的铬、镉、铅、铜、锌为轻微生态危害,镍为强生态危害;潜在生态危害指数RI计算值为216.69,属于中等生态危害。     

水热污泥与煤在混燃过程中的协同效应特性研究

以城市污泥衍生的水热污泥(SS-derived hydrochar)为对象,结合傅里叶红外光谱分析(FT-IR)、X射线荧光光谱分析(XRF)和X射线衍射分析(XRD)等对比研究了水热污泥与三种不同品阶煤(褐煤、烟煤和无烟煤)在有机/无机结构与燃料特性上的异同;同时,通过热重(TG)与偏差分析(Deviation)考察水热污泥与各阶煤在不同混合比例条件下的协同燃烧行为及其作用机制。结果表明,污泥经过水热处理后其有机结构和燃烧行为均提升至与煤相似的水平,该过程不仅改善污泥的燃烧特性,并增强其与煤之间的协同燃烧效应。水热污泥中适量的轻质组分与(碱)碱土金属能在混合燃烧过程中加速煤的失重速率,其对三种煤的促进作用可达4.4%-16.1%(褐煤)、1.9%-9.4%(烟煤)和4.8%-12.1%(无烟煤)。总体而言,水热污泥与褐煤混合而成的燃料在燃料性能上具有较大的优势,并且其混合比例以30%(水热污泥):70%(褐煤)与50%(水热污泥):50%(褐煤)为宜。     

Application of the Hall™ electrolytic conductivity detector for the analysis of chloroanilines and chloronitroanilines in POTW sludges

Simultaneous detection with a 700-A Hall? and an NPD detector is an effective technique for characterizing chloro-and chloronitroanilines in highly complex Publicly Owned Water Treatment Works (POTW) sludges. The utilization of a modified Varian effluent splitter and a SE-54 fused silica capillary column permitted the detection of mid-picogram quantities of the polar chloroanilines without sacrificing peak shape. The response of the Hall? detector in the halogen mode was roughly proportional to the number of chlorine atoms present, while the response of the Hall? in the nitrogen mode and the NPD was less predictably influenced by the presence of one or more nitro groups. When combined with retention time data, the ratio of the NPD response to the Hall? response has been found to substantiate the presence of chloro- and chloronitroanilines in sludge extracts.     

Continuous catalytic pyrolysis of oily sludge using U-shape reactor for producing saturates-enriched light oil

Continuous catalytic pyrolysis of oily sludge was carried out in a special U-shape reactor for producing saturates-enriched light oil. The sludge underwent thermal pyrolysis first and then catalytic pyrolysis. During the thermal pyrolysis, chain hydrocarbons were first cracked and further polymerized into aromatics. The effect of temperatures (400–800 °C) on the products was investigated and the maximum liquid yield (67.7%) was obtained at 500 °C. High temperature promoted polymerization, thus the distribution of aromatics in the liquid product was increased and was more concentrated in polyaromatics at 800 °C. In the catalytic upgrading stage, dolomite was used as catalyst and aromatics were adsorbed on it, either aggregated or decomposed. As a result, a light oil product with 57.0% saturates was obtained at the residence time of 8.9?s due to the conversion of aromatics and heavy hydrocarbons into light aliphatic hydrocarbons such as straight chain hydrocarbons. Compared with the oil phase in the raw sludge sample, the content of saturates was increased by 45.0% and that of the asphaltenes was reduced by 88.5%. Meanwhile, the inherent moisture in the oily sludge could participate in the steam reforming reaction, promoting the decomposition of aromatics and leading to an increase in the H₂ generation. Moreover, the release of H₂S was reduced from 0.132 to 0.005?mol per kg sludge and the sulfur content of the oil product was also decreased in the presence of dolomite. The deactivation of dolomite can be attributed to the carbonization of CaO and deposition of polyaromatic coke on the catalyst surface.     

污水处理工艺对污泥热处理特性的影响

通过10℃/min时的热重分析,对五种不同性质污泥分别在氮气和氧气气氛下的热解和燃烧特性进行了研究。结果表明,污水处理工艺的“好氧+厌氧”、“厌氧+好氧”过程以及污泥的厌氧消化均使污泥中的有机物结构复杂,导致污泥热解时有机物的分解和析出温度升高,且“好氧+厌氧”过程使污泥中有机物结构更复杂;而对污泥的燃烧过程和燃尽点无影响,但使着火温度升高。利用šatava-šesták 方程对污泥热解、燃烧的反应机理进行了研究。结果表明,五种污泥热解时均呈现为挥发分扩散和随后的化学反应机理函数,而燃烧时则为化学反应和随后的扩散过程。     

Application of Natural Clinoptilolite for Ammonium Removal from Sludge Water

Sludge water (SW) arising from the dewatering of anaerobic digested sludge causes high back loads of ammonium, leading to high stress (inhibition of the activity of microorganisms by an oversupply of nitrogen compounds (substrate inhibition)) for wastewater treatment plants (WWTP). On the other hand, ammonium is a valuable resource to substitute ammonia from the energy intensive Haber-Bosch process for fertilizer production. Within this work, it was investigated to what extent and under which conditions Carpathian clinoptilolite powder (CCP 20) can be used to remove ammonium from SW and to recover it. Two different SW, originating from municipal WWTPs were investigated (SW1: c₀ = 967 mg/L NH₄-N, municipal wastewater; SW2: c₀ = 718–927 mg/L NH₄-N, large industrial wastewater share). The highest loading was achieved at 307 K with 16.1 mg/g (SW1) and 15.3 mg/g (SW2) at 295 K. Kinetic studies with different specific dosages (0.05 g_CLI/mg_NH4-N), temperatures (283–307 K) and pre-loaded CCP 20 (0–11.4 mg/g) were conducted. At a higher temperature a higher load was achieved. Already after 30 min contact time, regardless of the sludge water, a high load up to 7.15 mg/g at 307 K was reached, achieving equilibrium after 120 min. Pre-loaded sorbent could be further loaded with ammonium when it was recontacted with the SW.     

Identification and Quantification of Polycyclic Aromatic Hydrocarbons in Polyhydroxyalkanoates Produced from Mixed Microbial Cultures and Municipal Organic Wastes at Pilot Scale

Polyhydroxyalkanoates (PHAs) are well-known biodegradable plastics produced by various bacterial strains, whose major drawback is constituted by the high cost of their synthesis. Producing PHAs from mixed microbial cultures and employing organic wastes as a carbon source allows us to both reduce cost and valorize available renewable resources, such as food waste and sewage sludge. However, different types of pollutants, originally contained in organic matrices, could persist into the final product, thus compromising their safety. In this work, the exploitation of municipal wastes for PHA production is evaluated from the environmental and health safety aspect by determining the presence of polycyclic aromatic hydrocarbons (PAHs) in both commercial and waste-based PHA samples. Quantification of PAHs by gas chromatography-mass spectrometry on 24 PHA samples obtained in different conditions showed very low contamination levels, in the range of ppb to a few ppm. Moreover, the contaminant content seems to be dependent on the type of PHA stabilization and extraction, but independent from the type of feedstock. Commercial PHA derived from crops, selected for comparison, showed PAH content comparable to that detected in PHAs derived from organic fraction of municipal solid waste. Although there is no specific regulation on PAH maximum levels in PHAs, detected concentrations were consistently lower than threshold limit values set by regulation and guidelines for similar materials and/or applications. This suggests that the use of organic waste as substrate for PHA production is safe for both the human health and the environment.     

Focused ultrasound solid-liquid extraction and selective pressurised liquid extraction to determine bisphenol A and alkylphenols in sewage sludge by gas chromatography-mass spectrometry

A new method for determining endocrine disrupter compounds (EDCs) in sewage sludge is described in this paper. EDCs studied were bisphenol A (BPA) and alkylphenols (APs). In order to obtain a fast and simple method, selective pressurised liquid extraction (SPLE) and focused ultrasound solid-liquid extraction (FUSLE) were tested. Best results for SPLE were obtained using Florisil as clean-up sorbent and dichloromethane as extraction solvent, while temperature was the only significant variable. Analyte extraction by SPLE was completed in only one extraction cycle of 1 min at 130 °C. FUSLE was carried out in one step of 20 s at 75% power (0.5 cycles) and with 8 mL of ethyl acetate. Although the optimised FUSLE process was faster, simpler and cheaper, SPLE provided higher recovery values (ranging from 81 to 105%) and therefore SPLE-based method was selected and validated. The SPLE and GC-MS method showed an LOD of 10.7 ng/g for BPA and LODs between 1.2 and 41.6 ng/g for APs. Relative standard deviation values lower than 6% were obtained for all analytes. As a result, an efficient, fast and simple method based on SPLE and GC-MS for the determination of BPA and APs in sewage sludge is proposed.