纯三元及含Zr, Ga元素磁粉的各向异性

未经均匀化热处理的纯三元及含Zr, Ga元素的SC合金铸片经优化的HDDR工艺处理都可以制备各向异性NdFeB磁粉。这表明：元素的添加及SC铸片是否进行了均匀化热处理都不是HDDR磁粉各向异性形成的必要条件。磁粉各向异性形成的关键因素在于HDDR工艺的调节,即适当地加快歧化反应过程,减缓脱氢再结合过程以及控制脱氢再结合时的合适氢气压强均有利于磁粉各向异性的形成。本文将为制备低成本高各向异性磁粉提供重要的指导。     

喷雾热解制备稀土超细粉末(Ⅰ)——氧化钇粒子形态与形成机理

对Y(NO₃)₃·6H₂O的差热和热重分析表明,Y(NO₃)₃·6H₂O经脱水和热分解在580C以上完全分解为Y₂O₃.在此基础上,以Y(NO₃)₃·6H₂O为前驱体,采用喷雾热解过程制备出粒度为0.50～1.50μm的立方相球形Y₂O₃粉末.通过对产物粒子粒度的理论计算与实验结果的比较,推测Y₂O₃粒子形成机理符合液滴-粒子转变机理(One-Droplet-One-Particlemechanism).本喷雾热解过程同样适用于其它稀土超细粉末的制备,粒子粒度可以通过调节液滴尺寸和溶液浓度等操作条件进行控制.     

掺希土离子Eu3+的BaTiO3超细微粉的制备及物性表征

近年来人们对材料及由材料制备的元件提出了高可靠性、多功能等要求。为了达到这种要求,人们从多种途径进行了探索,其中,对现有材料进行掺杂就是很有效的方法之一［１,２］。本文报道对ＢａＴｉＯ３超细微粉进行Ｅｕ３＋的有效掺杂并对其进行了物性表征。１实验部分１...     

Synthesizing 0.9PZN–0.1BT by mechanically activating mixed oxides

0.9Pb(Zn_1/3Nb_2/3)–0.1BaTiO₃ (0.9PZN–0.1BT) of perovskite structure has been successfully prepared by mechanically activating mixed oxides of PbO, ZnO, Nb₂O₅, BaO and TiO₂. The novel mechanochemical technique skips the phase-forming calcination step at an intermediate temperature that is always required in both the conventional solid state reaction and chemistry-based precursor routes. Ultrafine 0.9PZN–0.1BT particles of perovskite structure were formed when the constituent oxides were mechanically activated for more than 10 h. The powder was sintered to a density of 96% theoretical density at 1100°C for 1 h. The sintered 0.9PZN–0.1BT exhibits perovskite structure and a peak dielectric constant of 8800 at the Curie temperature of 60°C when measured at a frequency of 100 Hz.     

晶硅太阳能电池背面银浆所用片状银粉的研究

为了确保晶硅太阳能电池在拥有较高光电转换效率的同时降低投入成本,本文研究了45wt;的低固相含量状态下不同粒径及振实密度的片状银粉对背面银浆性能的影响.将球形银粉经过不同时间的球磨得到不同粒径的片状银粉.用这四种银粉制成背面银浆并经过印刷烧结形成背电极,研究了粒径、振实密度对背电极烧结膜形态及电性能的影响.结果证明平均粒径为2.5 μm的片状银粉具有最高的振实密度,由其制备背电极的烧结膜最为致密,焊接强度达到8.5 N,硅太阳能电池的光电转换效率达到18.09;,可以满足目前背面银浆的商业使用需要.     

Suspension plasma sprayed composite coating using amorphous powder feedstock

Al₂O₃-ZrO₂ composite coatings were deposited by the suspension plasma spray process using molecularly mixed amorphous powders. X-ray diffraction (XRD) analysis shows that the as-sprayed coating is composed of α-Al₂O₃ and tetragonal ZrO₂ phases with grain sizes of 26 nm and 18 nm, respectively. The as-sprayed coating has 93% density with a hardness of 9.9 GPa. Heat treatment of the as-sprayed coating reveals that the Al₂O₃ and ZrO₂ phases are homogeneously distributed in the composite coating.     

Preparation of nanosized Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> using different content of starting materials and their photoactivities

A series of nanosized Bi₂WO₆ catalysts was synthesized using various starting materials, and they were characterized by X-ray diffractometry, transmission electron microscopy, and diffuse reflectance spectroscopy. Rhodamine-B (RhB) photodegradation in aqueous medium was employed as a probe reaction to test the photoactivity of the as-prepared samples. Dependence of the photocatalytic activities on different contents of the starting materials was examined under visible irradiation (λ > 400 nm). The sample prepared in the following conditions: reaction time 24 h, the pH of the solution 7, the Bi³⁺ amount in the start precipitates 5 mmol — exhibited the highest photochemical activity when the hydrothermal temperature was settled at 180°C. Published in Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 243–249, Martch–April, 2009.     

Synthesis of terbium doped calcium phosphate nanocrystalline powders by citric acid sol–gel combustion method

Terbium doped calcium phosphate (Tb-doped CaP) nanocrystalline powders were synthesized by the citric acid sol–gel combustion method. The phase composition, morphology and luminescent property of Tb-doped CaP nanocrystalline powders were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, fluorescence spectrophotometer and fluorescence microscopy. At 700 °C, Tb-doped CaP nanocrystalline powders are composed of HAP (main phase) and β-TCP (minor phase) with Tb doping content of 0.5–4%. SEM and TEM observations show that the 4% Tb-doped CaP nanocrystalline powders are about 50–150 nm spherical particles. The 4% Tb-doped CaP nanocrystalline powders exhibit the strongest emission at 548 nm (λ_excitation = 240 nm) and show strong green fluorescence under fluorescence microscopy.     

较为宽松条件下水热合成铁酸铋粉体

Bismuth ferrite(BiFeO₃) powders were hydrothermally synthesized by using FeCl₃·6H₂O and BiCl₃ as staring materials, NaOH as a mineralizer and NH₄Cl as an additive. The results show that pure BiFeO₃ powders can be synthesized under loose hydrothermal conditions of reaction temperature ranging from 140 to 230 ℃ and NaOH concentration ranging from 2 mol·L^-1 to 5 mol·L^-1. Moreover, the morphologies of the products can be controlled by changing the hydrothermal conditions.