Resonant response of a thermalized ensemble of nonlinear oscillators

The analysis is carried out of the response of the center of gravity (dipole moment) of the distribution of noninteracting thermalized nonlinear oscillators to a sinusoidal driving force. Heat bath coupling is modeled by damping and noise. The driving is weak, but the frequency is resonant, so that there is a nonlinear resonance in the phase space. The response has a linear part that can be obtained from the perturbation analysis and a small nonlinear correction that is specific for the resonant structure.     

超稳Y沸石制备技术对沸石铝分布的影响 Ⅱ.均匀铝分布的超稳Y沸石的制备

对水热处理后得到的USY沸石作进一步的酸处理以及采用改进的氟硅酸盐溶液骨架富硅工艺,分别得到了经XPS剖面分析证实为铝分布均匀的超稳Y沸石HAY-Ⅰ和HAY-Ⅱ。IR分析表明,在酸处理过程中从USY沸石中去掉的那部分非骨架铝类与3690cm~(-1)处羟基有关,仍残留在HAY-Ⅰ沸石中的那部分非骨架铝类与3670cm~(-1)和3600cm~(-1)处羟基有关。XRD和化学分析表明HAY-Ⅰ沸石仍含有约50％的非骨架铝类,而HAY-Ⅱ沸石则基本上不含非骨架铝类,HAY-Ⅱ沸石还显示更高的结晶保留度。DTA分析表明,HAY-Ⅰ和HAY-Ⅱ两种沸石的热稳定性均高于USY沸石。     

Optimal control problems with applications to the elimination of substrate diffusing and convecting through immobilized enzyme

Some optimization problems concerning a substrate in a fluid are considered. The concentration of the substrate is affected by diffusion, convection, and elimination by enzymes, and the problem is to find the optimal distribution of enzymes. In this paper, the rate of elimination and the transmission coefficient are optimized. Mathematically, these problems are optimal control problems, and they are analyzed by means of Pontryagin's maximum principle.     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

On the exact distribution of linear combinations of order statistics from dependent random variables

We study the exact distribution of linear combinations of order statistics of arbitrary (absolutely continuous) dependent random variables. In particular, we examine the case where the random variables have a joint elliptically contoured distribution and the case where the random variables are exchangeable. We investigate also the particular L-statistics that simply yield a set of order statistics, and study their joint distribution. We present the application of our results to genetic selection problems, design of cellular phone receivers, and visual acuity. We give illustrative examples based on the multivariate normal and multivariate Student t distributions.     

既不离散也不连续的随机变量

讨论了既不离散也不连续的随机变量 ,并纠正了有关文献中关于连续型随机变量定义中的错误 .     

基于矩阵初等变换的n元函数极值的快速判别法

给出了 n元函数极值的一个充分条件 ,并结合矩阵的初等变换建立了 n元函数极值的一种快速判别法 ,最后给出了一个例子     

平衡规划问题的熵函数方法及其在混合交通流中的应用

将参变极值问题的极大熵函数方法应用到求解平衡规划问题中,通过先验分布信息和Kullback熵概念,给出了平衡规划问题基于Kullback熵表示的熵函数求解方法,并将平衡规划的极大熵函数方法应用于求解混合交通平衡分配问题．     

The application of spectral distribution of product of two random matrices in the factor analysis

In the factor analysis model with large cross-section and time-series dimensions,we pro- pose a new method to estimate the number of factors.Specially if the idiosyncratic terms satisfy a linear time series model,the estimators of the parameters can be obtained in the time series model. The theoretical properties of the estimators are also explored.A simulation study and an empirical analysis are conducted.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.