Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.     

镍电极开路电位测定微量硼氢根离子

实验采用循环伏安法，用镍电极代替铂铑等贵金属电极测定了碱性体系中不同硼氢根离子浓度下的开路电位，得出了研究电极的开路电位（-0．355～-0．280vs.SCE／V）与微量硼氢根离子浓度的对应关系，并用于监测电解偏硼酸钠制备硼氢化钠体系中微量硼氢根离子，同时计算了该方法的误差。结果表明，测量结果的相对标准偏差为2．2％；回收率为98．4％。该法简单、快速，可测定10^-5～10^-3mol／L范围的硼氢根离子浓度。     

Examination of the statistical method in the conjugated circuit theory

Summary The recently proposed statistical method for the calculation of resonance energies in the conjugated circuit theory is tested on the example of polyacenes. It is found that for the estimation of the resonance energy with a 10% average error, the method requires a sample consisting of about 20 (randomly chosen) Kekulé structures. Further increase of the sample size gives no significant gain in the accuracy of the method.

---

Überprüfung der statistischen Methode in der Konjugierten-Ring-Theorie

Zusammenfassung Die unlängst vorgeschlagene statistische Methode in der Konjugierten-Ring-Theorie (conjugated circuit theory) wird am Beispiel der Polyacene getestet. Es wurde festgestellt, daß für die Abschätzung der Resonanzenergien bei einem mittleren Fehler von 10% für diese Methode ungefähr 20 (willkürlich gewählte) Kekulé-Strukturen nötig sind. Weitere Erhöhung dieser Anzahl bringt keine signifikante Verbesserung der Genauigkeit der Methode.

     

Fluorinated compounds for advanced IC interconnect applications: a survey of chemistries and processes

The semiconductor industry is now in the early stages of an unprecedented change in materials set for the integrated circuit (IC) interconnect structure. The traditional layers of aluminum conductors and silicon dioxide dielectrics are being replaced by copper thin films and a variety of low k candidates, respectively. In many cases, fluorine confers desirable properties on either the precursors or the final films. At the same time, fluorine presents some potentially adverse effects, which have led to a so-called “fear-of-fluorine” in interconnect applications. This paper will review the proposed uses of fluorinated compounds in the interconnect structures, covering both precursors and the resulting thin films. Both the status of technical studies, and the prospects for commercial implementation, will be addressed.     

压电石英晶体在电解质水溶液中的振荡性能研究(Ⅱ)——频率、频移特性

根据两面电极浸入液体中的压电晶体等效电路模型和Pierce振荡器振荡方程的解,得到晶体在电解质溶液中的振荡频率(F_1)与溶液电导率(x)的关系式:F_1=(1/2π)(1/C_1+1/C_2)(1/X_e)[(R_e~2+X_e~2)x~2+2R_ex+1]。以自行设计的Pierce晶体振荡器。研究了晶体和主振电路参数、输入电压及检测池外壳屏蔽接地对AT切9MHz石英晶体在KCl、Na_2SO_4水溶液中的频率、相对于纯水频移随溶液电导率变化的影响规律,结果与上式相符。     

脉冲激光引信用PFM和PWM式LD驱动电路的研究

 在激光引信的通讯系统中，针对引信用脉冲式半导体激光器驱动电路的脉冲宽度、频率、功率可调的需要，根据LD驱动电路的工作原理，建立了LD驱动电路的一般模型。然后用电子多频振荡器提供驱动信号，用双MOS驱动器来驱动半导体激光器，通过大量的实验、仿真、分析、比较，设计出了方便可调的大功率LD的驱动电路，该电路的脉冲频率和脉冲宽度可方便调整。并且该驱动电路的频率调节范围大（10Hz~20kHz）；脉冲宽度可以从几ns到几百ns进行调节，大大提高了激光引信通讯系统的性能与可靠性。     

基于开关控制的兴趣实验设计

设计了开关控制实验,专门对常见的开关特点及使用进行探讨,根据开关特点搭建相应的控制电路,用近似于工程项目的形式锻炼学生对开关的灵活应用,激发了学生实验的兴趣和积极性.     

Convergence of the Finite Difference Scheme for a Fast Diffusion Equation in Porous Media

We are concerned with an implicit scheme for the finite difference solution to a nonlinear parabolic equation with a multivalued coefficient that describes the fast diffusion in a porous medium. The boundary conditions contain the multivalued function as well. We prove the stability and the convergence of the scheme, emphasizing the precise nature of convergence in this specific case, and compute the error level of the approximating solution. The method is aimed to simplify the numerical computations for the solutions to equations of this type, without performing an approximation of the multivalued function. The theory is illustrated by numerical results.     

Zero Current Potentiometry for Measuring the Interface Potential at the Electrode/Solution Interface. Theoretical and Experimental Study

A novel electrochemical approach has been proposed to measure the interface potential at the electrode/solution interface based on reconstructing the three‐electrode system of a potentiostat. In this work, the method was investigated both theoretically and experimentally. Mathematical expressions, describing current? potential characteristics, were derived. Zero current potential E_zcp was defined as the potential at which the current is zero based on linear sweep voltammetry, and was determined from the I? E curve to measure the interface potential. The experimental results obtained with the couples Fe(CN)₆^3?/Fe(CN)₆^4? and Co(NH₃)₆³⁺/Co(NH₃)₆²⁺ as examples agreed well with the theory. The proposed approach exhibits an excellent performance for measuring the interface potential due to the advantages of rapidity, high stability and accuracy.     

Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.